Professional Documents
Culture Documents
BOQ Chitoshi
BOQ Chitoshi
BOQ Chitoshi
Earth excavation
Item no Structure Description Length(ft) Width(ft)
Footing
F1 5.00 5.00
F2 6.00 6.00
Sand filling
Item no Structure Description Length(ft) Width(ft)
2/3 of excavation
Polythene sheet
Item no Structure Description Length(ft) Width(ft)
Footing
F1 5.00 5.00
F2 6.00 6.00
Grade Beam 163.83 1.00
RCC (1:2:4)
Item no Structure Description Length(ft) Width(ft)
F1 5.00 5.00
F2 6.00 6.00
Grade Beam 163.83 0.83
Slab 1064.00
Column
C1 1.67 1.17
C2 1.67 1.17
Formwork
Item no Structure Description Length(ft) Width(ft)
F1 20.00 1.25
F2 24.00 1.50
Grade beam 163.83 1.25
Column C1,C2 5.67 6.00
Reinforcement
Structure Description Bar type No. of bar Bar dia(mm)
Long Direction 10 16
Footing F1
Footing F1
Short Direction 10 16
Long Direction 14 16
Footing F2
Short Direction 14 16
Main bar 6 20
P. Column C1/20mm
Stirrup 16 10
Main bar 8 20
P. Column C2/20mm
Stirrup 16 10
Main bar 8 16
P. Column C1/16mm
stirrup 16 10
Main bar 6 16
P. Column C2/16mm
stirrup 16 10
St. bar 6 16
GF. Beam Ext.Top & Bottom 2 16
stirrup 281 10
Long Direction 52 10
Floor slab
Short Direction 106 10
10"& above Brick work (1:4) (1st Class brick) Super structure
Item no Structure Description Length(ft) Width(ft)
Low height wall 163.83 0.83
Total Materials
Cement (bag) #REF! 420.00
Local Sand (cft) #REF! 0.00
Machine made brick (nos) 0 0.00
10 hole brick (nos) #REF! 0.00
1st class brick (nos) #REF! 0.00
Stone Chips(cft) #REF! 0.00
Brick Chips(cft) #REF! 0.00
Reinforcement (kg) 3,772 65.00
:
on
Height(ft) Structure no. Volume(ft3) Remarks
1.17 4 117.00
1.33 6 287.28
Total (cft) 404.28
Total (m3) 11.45
#REF!
#REF!
- BDT
#REF!
#REF!
#REF!
#REF!
245,208 BDT
#REF!
Checked by
212.56 #REF!
595.50 #REF!
- -
- #REF!
2,851.70 #REF!
1,006.95 #REF!
3,772.43 -
SCHEDULE OF AT ITEMS AND BILL OF QUANTITIES FOR
CONSTRUCTION OF PROPOSED GRAMEEN KALYAN HEALTH CENTRE (CHITOSHI)
AT KUMILLA
A. CIVIL WORK:
Unit Rate
Sl No Description of work Unit Quantity Amount (BDT)
(BDT)
1
Site Preparation : Preparation of work site including cleaning
removing of spoils of undesirable materials if any, including providing
LS. 1.00 20000.00 20000.00
proper layout for building and piles etc. everything complete as per
specification of the Engineer-in-charge.
Sand filling in foundation trenches & plinth with sand having FM 0.5 to
0.8 including leveling & compaction to achieve minimum dry density of
90% with optimum moisture content (modified proctor test) by
ramming each layer up to finished level as per design supplied by the cum 7.63 850.00 6488.02
design office only etc. all complete & accepted by the Engineer.(30% of
the total quantity will be deducted from the loose volume for ensuring
the proper compaction of sand)
N:B:
1) Reinforcement & Cement will directly be supplied by the HQ of Grameen Kalyan (GK).
2) Brick & Brick Chips should be supplied by contractor from Dhamrai/Singeair.
SI NO. Description of Work Unit Quantity
I-Beam kg 12000.00
45 Supplying, fitting & fixing of 6mm thick MS base plate, 16mm dia
Anchor bolt for truss with all complete in all respect as per drawing & kg 957.00
accepted by the Engineer.
Unit Rate Amount
(BDT) (BDT)
150.00 1800000.00
160.00 184736.00
150.00 143550.00
2128286.00
SCHEDULE OF AT ITEMS AND BILL OF QUANTITIES FOR
CONSTRUCTION OF PROPOSED GRAMEEN KALYAN HEALTH CENTRE (CHITOSHI)
AT KUMILLA
2 Long Pan
3 Low-down
g) Shower Assembly
Supply, fitting, fixing of C.P. Shower (Cotto) assembly
complete with all standard accessories and fittings. Shower
assembly shall be fitted to pipe end by using approved sealing
each 1
to pipe end by using approved sealing compound to make the
joint water tight as per drawing and direction of Engineer-in-
charge.
7 Glass Mirror
8 Towel Rail
CP towel rail complete with CP wall bracket fitted on wall
with plastic plug and screws as per drawing and direction of
the engineer-in-charge.
a) uPVC P‑Trap
uPVC P-trap with 50mm vent and shall have minimum 50mm
water seal.
b) uPVC S‑Trap
100 mm dia uPVC S‑Trap with 50mm vent and shall have
each 3
50mm water seal.
c) uPVC Bend
uPVC Bend shall be with service door (Tee, Door tee, Offset,
side door, back side door left & right door, Long-Trap, cowl
include all fitting) with cap. Bend angle 88°/63°/45°/43° etc.
19 GI Pipe
22 G.I. Union
Supplying, fitting and fixing G.I. Union with sealant etc.
complete in all respects approved and accepted by the
Engineer.
a) 12 mm dia each 2
b) 19 mm dia each 14
c) 25 mm dia each 2
d) 32 mm dia each 4
e) 37 mm dia each 4
f) 50 mm dia each 6
a) 37 mm dia each 1
b) 50 mm dia each 1
Sl No. Description of work Unit Quantity
24 G.I. Float Valve
Supplying, fitting and fixing best quality G.I. Float valve,
threaded joint Pit valve etc. complete approved and accepted
by the Engineer.
a) 37 mm dia each 1
25
Construction of masonry Inspection pit with 250 mm thick
brick work in cement mortar (1:4) including necessary
earthwork, side filling & one layer brick flat soling, 75mm
thick (1:3:6) base concrete for making invert channel and
12mm thick (1:4) cement plaster with neat finishing & others each 14
all necessary things etc. all complete up to a depth of 700mm
approved & accepted by the engineer. (Clear 450mm*450mm
to 600mm*600mm & depth 450 to 900mm) (Re-bar, Cement
will directly be supplied by GK.)
26
Construction & placing of RCC inspection pit cover (slab) in
(1:2:4) with 1% reinforcement and 450 mm dia C.I. man-hole
cover with locking/unlocking arrangement including necessary
earthwork, side filling shuttering, curing, cement plaster (1:4) each 14
with neat finishing on edges & top etc. all complete approved
& accepted by the engineer. (600mm*600mm*75mm RCC Pit
cover). (Re-bar, Cement will directly be supplied by GK)
27
Construction & placing of 600 mm dia C.I. man-hole cover
with locking/unlocking arrangement including necessary
shuttering, curing, cement plaster (1:4) with neat finishing on each 4
edges & top etc. all complete approved & accepted by the
engineer.
28 Soak Well
N:B:
1) Reinforcement & Cement will directly be supplied by the HQ of Grameen Kalyan (GK).
2) Brick & Brick Chips should be supplied by contractor from Dhamrai/Singeair.
3) Recommended brand for uPVC fittings are Anower group C-grade.
SCHEDULE OF AT ITEMS AND BILL OF QUANTITIES FOR
CONSTRUCTION OF PROPOSED GRAMEEN KALYAN HEALTH CENTRE (CHITOSHI)
AT KUMILLA
1 CONCEALED CONDUIT:
20 mm dia rm 2,000.00
25 mm dia rm 800.00
2 LIGHT FITTINGS
3 FAN :
6 DISTRIBUTION BOARD:
Sl No. Description of work Unit Quantity
a) 1C-1.5 rm rm 2,900.00
b) 1C-2.5 rm rm 2,700.00
c) 1C-4 rm rm 60.00
Sl No. Description of work Unit Quantity
d) 1C-6 rm rm 50.00
a) 1C-10 rm rm 140.00
b) 1C-16 rm rm 50.00
10 EARTHING:
11
Circuit Breaker: Providing & fixing on a prepared
board 250/500 volt grade following TPMCCB,
TPMCB, SPMCB having minimum breaking capacity 6
KA with thermal ovel-current and instantaneous
electromagnetic short circuit release provision. Circuit
Breaker shall be Legrand (energypac)
TOTAL TK. 0
In Words :
Direct Cost :