Professional Documents
Culture Documents
CDH1 MP5
CDH1 MP5
05
Replaces: 02.05
1/44
Mill type
Overview of contents
Contents Page Contents Page
Technical data 2 Flange connections 18
Diameter, weights 2 Position measuring system 20
Areas, forces, flows 3 Proxmitiy switch 24
Tolerances 3 Screwed coupling 26
IHC-Designer: Engineering software 4 Plain clevis 27
Mounting style overview 4 Self-aligning clevis 28
Ordering details 5 Buckling 31
Plain clevis at base MP3 6 End position cushioning 34
Self-aligning clevis at base MP5 8 Spare parts 37
Round flange at head MF3 10 Tightening torques 39
Round flange at base MF4 12 Seal kits 40
Trunnions MT4 14
Foot mounting MS2 16
Features
– 6 mounting styles Engineering software: IHC-Designer from Rexroth
– Piston Ø: 40 to 320 mm
Online www.boschrexroth.com/Rexroth-IHD
– Piston rod Ø: 28 to 220 mm
– Stroke lengths up to 6 m Download www.boschrexroth.com/
business_units/bri/de/downloads/ihc
2/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
Technical data (for applications outside these parameters, please consult us!)
Standards: ISO cleanliness class
Bosch Rexroth Standard; main dimensions such as piston Ø Maximum permissible degree of pressure fluid contamination
and piston rod Ø meet the requirements of DIN ISO 3320. is to ISO 4406 (c) class 20/18/15.
Nominal pressure: 250 bar Stroke velocity: Up to 0.5 m/s (dependent on the connection
Static proof pressure: 375 bar ports), higher stroke velocities on request
Higher operating pressures on request. Bleed screw as standard: Secured against unscrewing
The specified operating pressures are only valid for applications Undercoat: The hydraulic cylinders are, as standard, painted
with shock-free operation. If extreme loads occur, eg. as happens (colour tone gentian blue RAL 5010) with a max. thickness of
in high sequence cycles, the fixing elements and piston rod thread 80 µm. Other colour tones on request.
connections need to be designed for durability (fatigue strength).
Acceptance: Each cylinder is tested to Bosch Rexroth
Installation: Optional standards.
Pressure fluid / pressure fluid temperature range: Cylinders whose application data lies outsdie the stated values
HL, HLP, HFD-R: –20 °C to +80 °C can be offered as a special version.
HFA: +5 °C to +55 °C
Cylinders with piston Ø > 320 mm are available on request as
Water glycole HFC on request
an ABS (Applications Based Standardisation) cylinder.
Viscosity range: 2.8 to 380 mm2/s
For assembly, commissioning and maintenance of hydraulic
cylinders the operating guidelines RE 07100-B have to be
taken into account!
Diameter, weights
Piston Piston Area Areas Force at 250 bar 1) Flow at 0.1 m/s 2)
rod ratio Piston Rod Annulus Pressure Diff. Pulling Out Diff. In
AL MM ϕ A1 A2 A3 F1 F2 F3 qV1 qV2 qV3
Ø mm Ø mm A1/A3 cm2 cm2 cm2 kN kN kN L/min L/min L/min
22 1.43 3.80 8.76 9.50 21.90 2.3 5.3
40 12.56 31.40 7.5
28 1.96 6.16 6.40 15.40 16.00 3.7 3.8
28 1.46 6.16 13.47 15.40 33.70 3.7 8.1
50 19.63 49.10 11.8
36 2.08 10.18 9.45 25.45 23.65 6.1 5.7
36 1.48 10.18 20.99 25.45 52.45 6.1 12.6
63 31.17 77.90 18.7
45 2.04 15.90 15.27 39.75 38.15 9.5 9.2
45 1.46 15.90 34.36 39.75 85.90 9.5 20.7
80 50.26 125.65 30.2
56 1.96 24.63 25.63 61.55 64.10 14.8 15.4
56 1.46 24.63 53.91 61.55 134.80 14.8 32.3
100 78.54 196.35 47.1
70 1.96 38.48 40.06 96.20 100.15 23.1 24.0
70 1.46 38.48 84.24 96.20 210.55 23.1 50.5
125 122.72 306.75 73.6
90 2.08 63.62 59.10 159.05 147.70 38.2 35.4
90 1.70 63.62 90.32 159.05 225.70 38.2 54.2
140 153.94 384.75 92.4
100 2.04 78.54 75.40 196.35 188.40 47.1 45.3
100 1.64 78.54 122.50 196.35 306.15 47.1 73.5
160 201.06 502.50 120.6
110 1.90 95.06 106.00 237.65 264.85 57.0 63.6
110 1.60 95.06 159.43 237.65 398.52 57.0 95.7
180 254.47 636.17 152.7
125 1.93 122.72 131.75 306.80 329.37 73.6 79.1
125 1.64 122.72 191.44 306.80 478.45 73.6 114.9
200 314.16 785.25 188.5
140 1.96 153.96 160.20 384.90 400.35 92.4 96.1
140 1.68 153.9 226.2 384.8 565.5 92.4 135.7
220 380.1 950.3 228.1
160 2.12 201.0 179.1 502.6 447.7 120.7 107.4
160 1.69 201.0 289.8 502.7 724.5 120.7 173.8
250 490.8 1227.2 294.5
180 2.08 254.4 236.4 636.2 591.0 152.7 141.8
180 1.70 254.4 361.3 636.2 903.2 152.7 216.7
280 615.7 1539.4 369.4
200 2.04 314.1 301.6 785.4 753.9 188.5 180.9
200 1.64 314.1 490.1 785.4 1225.2 188.5 294.0
320 804.2 2010.6 482.5
220 1.90 380.1 424.2 950.3 1060.3 228.1 254.4
F1 A3 A1 F2 A2
CDH1 MF4
See pages 12, 13
Ordering details
1) 10) = Only piston Ø 80 to 320 mm
= Only piston Ø 40 to 200 mm
2) 11) = Not for piston Ø 320 mm
= The trunnion can be located as required.
Dim. „XV“ must always be stated, in case of an order, in 12) = For the CG version only on one piston rod end
clear text and in mm. 13) = Seal versions A, B is not possible;
3) = Only piston rod Ø 22 to 110 mm Piston rod version „H“ is not possible;
4) = Only piston rod Ø 22 to 140 mm Piston rod Ø 22 mm is not possible;
5) = Not possible for MF4. End position damping possible from piston rod Ø 45 mm;
6) = Standard for seal versions M, T, S and CG version is not possible
piston Ø 220 to 320 mm; Max. stroke length to be taken into account, page 21
14) = Perm. stroke length to be taken into account,
Not possible for seal versions A, B
7) = For the CG version only one self-aligning clevis/plain pages 31 to 33
15) = Not possible for version piston rod end N
clevis is fitted
8) = Only MF3; MT4; MS2
9) = Only possible in conjuction with position measuring
sysem „T“
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 5/44
Ordering details
H1 A
Differential Option 2
cylinder = CD A = 15) Maintenance-free
Double rod plain bearing
cylinder 8) = CG B= Flange grease
Series = H1 nipple
C = 9) Analogue output
Mounting styles 4-20 mA
Plain clevis at base 1) = MP3 F = 9) Analogue output
Self-aligning clevis at base = MP5 0-10 V
Round flange at head = MF3 D = 9) Digital output SSI
Round flange at base = MF4 Y = 12) Enter piston rod
Trunnions 2) = MT4 extension LY
Foot mounting = MS2 in clear text
Piston Ø (40 to 320 mm) in mm
See page 2 W= Without option
Y PJ + X*
Ø D4 Ø D4 9)
NV
EE EE "A"
VE
G 1/41)
R
M
X1
X1
Ø MM
Ø DA
Ø RA
KK
ØD
ØD
3)
"A"
WA L
A XC + X* M1
Ø CD
EW
"A-A"
For seal versions „A”, „B” and AL-Ø 160 - 200 mm
VE
Ø RA
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 7/44
AL MM KK A KK A NV D DA D4 EE EE Y PJ
Ø Ø 5) 5) 6) 6) 2) 4) 4)
CDH1 MP5
Y PJ + X*
Ø D4 Ø D4 11)
NV
EE EE "A"
VE
G 1/41)
S
M
X1
X1
Ø MM
Ø DA
Ø RA
KK
ØD
ØD
3)
"A"
WA LT
A XO + X*9) M1
Ø CX10)
Z
Z
EX
EP
For seal versions „A”, „B” and AL-Ø 160 - 320 mm "A-A"
VE
Ø RA
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 9/44
AL MM KK A KK A NV D DA D4 EE EE Y PJ X1
Ø Ø 5) 5) 6) 6) 2) 4) 4)
CDH1 MF3
Y PJ + X*
Ø D4 Ø D4
NV A1 EE EE
FB
α
X1
X1
Ø MM
Ø DA
Ø RD
KK
ØD
ØD
G 1/41)
3)
A VD FC
VD UC
WC NF
ZB + X*9)
CGH1 MF3
Y PK + X*
Ø D4 Ø D4
NV A1 EE EE
FB
α
X1
X1
Ø MM
Ø DA
Ø RD
Ø RA
KK
ØD
ØD
G 1/41)
3)
VE
A VD FC
VD WA + X* UC
WC NF
ZM + 2 x X*9)
VE
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 11/44
AL MM KK A KK A NV D DA D4 EE EE Y PJ X1
Ø Ø 5) 5) 6) 6) 2) 4) 4)
CDH1 MF4
Y PJ + X*
Ø D4 Ø D4
NV EE EE FB
VE
G 1/41)
α
X1
X1
Ø MM
Ø RD
Ø RA
Ø DA
KK
ØD
ØD
3)
WA
A VD NF FC
ZP + X*9) VD UC
VE
Ø RA
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 13/44
AL MM KK A KK A NV D DA D4 EE EE Y PJ X1
Ø Ø 5) 5) 6) 6) 2) 4) 4)
Trunnions MT4
CDH1 MT4
Y PJ + X*
Ø D4 Ø D4
NV
EE EE
VE
G 1/41)
3)
r
X1
X1
UV
Ø MM
Ø DA
Ø RA
Ø TD
KK
ØD
ØD
WA BD
A XV10) TL TM TL
ZB + X*9)
For seal versions „A”, „B” and AL-Ø 160 - 320 mm Dimensions for a cylinder with a rod extension „LY“
in the retracted condition
VE
Ø RA
LY XV
CGH1 MT4
Y PK + X*
Ø D4 Ø D4
NV
EE EE
VE
G 1/41)
3)
r
X1
X1
UV
Ø MM
Ø DA
Ø RA
Ø RA
Ø TD
KK
ØD
ØD
WA BD VE
A XV10) WA + X* TL TM TL
ZM + 2 x X*9)
AL MM KK A KK A NV D DA D4 EE EE Y PJ X1 WA
Ø Ø 5) 5) 6) 6) 2) 4) 4)
CDH1 MS2 Y PJ + X*
Ø D4 Ø D4
NV
EE EE
VE 3)
G 1/41)
10)
X1
X1
L1
Ø MM
Ø DA
Ø RA
KK
ØD
ØD
LH
ST
WA S1 S1 Ø SB
A S S TS
XS SS + X*9) US
ZB + X*9)
VE
Ø RA
CGH1 MS2
Y PK + X*
Ø D4 Ø D4
NV
EE EE
VE 3)
G 1/41)
10)
X1
X1
L1
Ø MM
Ø DA
Ø RA
Ø RA
KK
ØD
ØD
LH
ST
WA S1 S1 VE
Ø SB
A S S WA + X* TS
XS SS + X*9) US
ZM + 2 x X*9)
AL MM KK A KK A NV D DA D4 EE EE Y PJ X1 WA
Ø Ø 5) 5) 6) 6) 2) 4) 4)
Flange connections
CDH1
Y PJ + X*
X1
X1
CGH1
Y PK + X*
X1
X1
Porting pattern for rectangular flanges to ISO 6162 table 2 Porting pattern for square flanges to ISO 6164 table 2
(^
= SAE 6000 PSI)
d1 d1
Ød3
Ød3
w
c
w w
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 19/44
Flange connections
H
XC / XO + X*
D1
ZB + X* L5
D1
ØD2
L6 L6
ZP + X* VD L4
ZB + X* L5
ZB + X* L5
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 21/44
AL MM X*max XC XO H ZB ZP VD L2 L4 L5 L6 D1 D2
Ø Ø max Ø
–
40 1400 417 417 115 235 265 5 98 0 166 166 80 0
28
28
50 1400 430 430 120 243 274 5 103 0 166 166 96 0
36
36
63 2000 480 480 130 287 310 5 116 0 166 166 96 0
45
45
80 2000 515 515 125 312 330 5 132 0 166 143 96 0
56
56
100 3000 560 560 135 352 390 5 145 0 166 123 96 0
70
70
125 3000 620 620 145 392 432 5 172 21.5 166 121 96 33
90
90
140 3000 665 665 155 430 475 10 182 21.5 166 111 96 33
100
100
160 3000 720 720 165 475 535 10 200 28.5 166 96 96 43
110
110
180 3000 775 775 175 515 585 10 222 28.5 166 86 96 43
125
125
200 3000 815 815 190 535 615 10 237 32 166 76 96 48
140
140
220 3000 – 960 205 635 720 10 280 32 166 71 96 48
160
160
250 3000 – 1000 220 659 744 10 300 38 166 71 96 57
180
180
280 3000 – 1105 270 744 839 10 330 38 166 61 96 57
200
200
320 3000 – 1210 300 815 935 10 375 44 166 36 96 66
220
Technical data (for applications outside these parameters, please consult us!)
Mounting style
MP3, MP5 MF3, MF4, MT4, MS2
1)
1)
Pin allocation
Position measuring system (analogue output) Pin Cable Signal / current Signal / voltage
Component plug (viewed on the pin side)
1 grey 4...20 mA 0 - 10 V
2 pink Gnd Gnd
2 1
3 yellow n. c. 10 - 0 V
3 6 4 green n. c. Gnd
Proximity switch
CDH1
X3
1) 1)
L7 PL + X*
CGH1
X3
1) 1)
L7 PM + X*
Mounting style
X5
X4
3)
Proximity switch
AL MM PL PM L7 X3 X4 X5
Ø Ø
22
40 112 112 83 94 170 125
28
28
50 110 110 92 98 175 130
36
36
63 125 125 104 103 180 135
45
45
80 138 138 108 108 185 140
56
56
100 161 161 129 116 195 150
70
70
125 189 189 143 126 205 160
90
90
140 209 209 161 146 225 180
100
100
160 228 228 191 151 230 185
110
110
180 254 254 204 159 235 190
125
125
200 264 264 212 166 245 200
140
140
220 310 310 250 177 2) 255 – 3)
160
160
250 310 310 274 187 2) 265 – 3)
180
180
280 369 369 285 189 2) 275 – 3)
200
200
320 415 415 295 209 2) 285 – 3)
220
Proximity switch
Inductive proximity switches are used as a reliable end position fore wear-free. Due to safety reasons the proximity switch is
control for hydraulic cylinders. They are an important element, protected against being screwed in too deep. The switching
in providing safety systems, interlocks and/or other machine distance can therefore not be adjusted. For the version with
functions where signals safety and exactly monitor the end proximity switches (Option 1 „E“), the cylinders are fitted with
position. The up to 500 bar rated high pressure proximity proximity switches on each end.
switches operates without contact and contacts and are there-
Technical data (for applications outside these parameters, please consult us!)
Function PNP N/O
Permissible pressure bar 500
Operating voltage V DC 10 … 30
Including the residual ripple % ≤ 15
Voltage drop V ≤ 1.5
Rated operating voltage V DC 24
Rated operating current mA 200
No load current mA ≤8
Residual current µA ≤ 10
Repeatability % ≤5
Hysteresis % ≤ 15
Ambient temperature range °C – 25 … + 80
Temperature drift % ≤ 10
Switching frequency Hz 1000
Protection Active area IP 68 to DIN 40050
Proximity switch IP 67 to DIN 40050
Housing material Material No. 1.4104
1 1)
Pin allocation +
1) Brown
2) 1
4
2 4 2) Black
3 3)
3 3) Blue
–
Coupling
For pressure measurement or bleeding. Ø 20
For installaion in the bleed/measuring port. Coupling with
check valve function, i.e. it can also be connected when
pressure is present.
M16x2
Scope of supply:
38
EM C
Ø CK
L1
LE
CA
1)
AW
KK2)
Øb
AL = Piston Ø
1) = Grease nipple; cone head form A to DIN 71412
2) = The plain clevis must always be screwed on up to
the piston rod thread stop
3) m = Weight of the plain clevis
28/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
AL-Ø 40-280 mm EU C
EN
Ø CN
Z
Z
L1
LF
2)
CH
1)
AX
KK3)
Øb
AL = Piston Ø
1) = Grease nipple; cone head form A to DIN 71412
2) = Associated pin Ø m6;
associated pin Ø j6 with a maintenance-free self-aligning
clevis
3) = The self-aligning clevis must always be screwed on up to
the piston rod thread stop
4) m = Weight of the self-aligning clevis
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 29/44
AL-Ø 40-280 mm EU C
EN
Ø CN
Z
Z
L1
LF
CH
2) 1)
AX
MA3)
KK L2
Øb
AL = Piston Ø
1) = Grease nipple; cone head form A to DIN 71412
2) = Associated pin Ø m6;
associated pin Ø j6 with a maintenance-free self-aligning
clevis
3) M = Tightening torque
A
The self-aligning clevis must always be screwed on up to
the piston rod thread stop. Subsequently, the clamping
screws have to be tightned to the specified torque.
4) m = Weight of the self-aligning clevis
30/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
EU C
EN
Ø CN
Z
Z
L1
LF
CH
2) 1)
AX
MA3)
KK3) L2
Øb
AL = Piston Ø
1) = Grease nipple; cone head form A to DIN 71412
2) = Associated pin Ø m6;
associated pin Ø j6 with a maintenance-free self-aligning
clevis
3) M = Tightening torque
A
The self-aligning clevis must always be screwed on up to
the piston rod thread stop. Subsequently, the clamping
screws have to be tightened to the specified torque.
4) m = Weight of the self-aligning clevis
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 31/44
Buckling
The permissible stroke length with a flexibly guided load and a Explanation:
3.5 safety factor against buckling can be obtained from the E = Modulus of elasticity in N/mm2
appropriate table. When a deviating cylinder installation = 2.1 x 105 for steel
orientation the permissible stroke length has to be interpolated. l = Moment of inertia in mm4 for a cicular
Permissible stroke lengths for non-guided loads are available d4•π
on request. cross-section = = 0.0491 • d 4
64
The calculations for buckling are carried out as follows: ν = 3.5 (safety factor)
1. Calculation according to Euler LK = Free buckling length in mm (dependent on the mounting
π2 • E • I style, see sketches A, B, C)
F= if λ > λg d = Piston rod Ø in mm
ν • LK2
λ = Slenderness ratio
2. Calculation according to Tetmajer 4 • LK E
= λg = π
d 2 • π (335-0,62 • λ) d 0.8 • Re
F= if λ ≤ λg Re = Yield strength of the piston rod material
4•ν
The influence of the mounting style on the buckling length:
A B C
L
L
L
L
L
L
LK = 0,7 L LK = L LK = 2 L
140 1865 1965 2520 1590 1660 1910 1305 1340 1440
140 1620 1710 2180 1360 1415 1630 1090 1120 1200
220 90°
160 2075 2200 3000 1810 1890 2280 1510 1560 1730
160 1885 1990 2570 1600 1670 1930 1300 1330 1440
250
180 2330 2475 3370 2040 2135 2570 1710 1770 1960
6000
180 2075 2200 2900 1775 1880 2170 1450 1490 1620
280
200 2510 2670 3700 2200 2310 2820 1850 1920 2140
200 2170 2300 3070 1850 1940 2290 1500 1550 1700 1) Perm. stroke length
320
220 2590 2760 3850 2260 2380 2920 1890 1960 2200
32/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
1)
125 45°
90 3000 3000 3000 3000 3000 3000 3000 3000 3000
90 3000 3000 3000 3000 3000 3000 2770 2820 2980
140
100 3000 3000 3000 3000 3000 3000 3000 3000 3000
3000
100 3000 3000 3000 3000 3000 3000 2980 3000 3000
160
110 3000 3000 3000 3000 3000 3000 3000 3000 3000
110 3000 3000 3000 3000 3000 3000 3000 3000 3000
180
125 3000 3000 3000 3000 3000 3000 3000 3000 3000
125 3000 3000 3000 3000 3000 3000 3000 3000 3000
200
140 3000 3000 3000 3000 3000 3000 3000 3000 3000
1)
140 5400 5680 6000 4800 4980 5780 4120 4220 4560
220 90°
160 6000 6000 6000 5820 6000 6000 5150 5330 6000
160 6000 6000 6000 5450 5660 6000 4720 4840 5290
250
180 6000 6000 6000 6000 6000 6000 5730 5920 6000
6000
180 6000 6000 6000 6000 6000 6000 5270 5420 5970
280
200 6000 6000 6000 6000 6000 6000 6000 6000 6000
200 6000 6000 6000 6000 6000 6000 6000 6000 6000 1) Perm. stroke
320
220 6000 6000 6000 6000 6000 6000 6000 6000 6000 length
Mounting style CDH1: MF4
AL MM Permissible stroke lengths at Max. available
Ø Ø 100 bar 160 bar 250 bar stroke Installation
0° 45° 90° 0° 45° 90° 0° 45° 90° lengths
22 325 340 370 245 250 260 105 110 140
40 0°
28 565 590 695 465 475 520 365 370 385
28 455 470 515 350 360 375 220 230 265
50
36 770 805 960 640 660 725 515 525 550 1)
2000
36 600 620 710 475 490 520 350 370 380
63
45 930 975 1210 790 820 920 645 660 700
45 760 785 895 610 625 670 395 420 495
80
56 1150 1210 1495 985 1020 1145 810 825 875
56 905 945 1120 745 765 835 420 460 620
100
70 1370 1445 1880 1190 1235 1440 995 1020 1100
1)
140 2250 2400 3350 1990 2090 2550 1685 1740 1950
220 90°
160 2800 2990 4500 2530 2680 3480 2220 2310 2700
160 2615 2780 3900 2320 2435 3000 1980 2050 2300
250
180 3140 3360 5050 2850 3010 3910 2500 2610 3050
6000
180 2850 3050 4400 2550 2680 3370 2190 2270 2600
280
200 3370 3610 5550 3070 3250 4300 2700 2820 3330
200 3000 3210 4700 2680 2830 3590 2100 2390 2750 1) Perm. stroke
320
220 3500 3750 5800 3180 3370 4480 2790 2920 3460 length
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 33/44
1)
90 1885 1970 2390 1620 1665 1850 1340 1360 1430
90 1675 1710 2060 1410 1415 1575 1140 1155 1205
140
100 2020 2115 2610 1735 1790 2010 1440 1465 1555
3000
100 1805 1880 2210 1510 1550 1680 1215 1230 1285
160
110 2140 2240 2740 1830 1885 2100 1505 1535 1620
110 1925 2005 2360 1605 1650 1790 1290 1310 1360
180
125 2420 2540 3000 2080 2150 2420 1720 1755 1865
125 2130 2230 2690 1790 1840 2040 1440 1465 1540
200
140 2610 2750 3000 2250 2330 2670 1865 1910 2050
1)
140 2490 2510 3150 2050 2120 2400 1685 1720 1835
220 90°
160 3000 3170 4230 2640 2750 3260 2240 2310 2530
160 2750 2900 3660 2380 2460 2810 1970 2020 2160
250
180 3350 3540 4750 2960 3090 3670 2520 2600 2850
6000
180 3040 3210 4140 2640 2750 3170 2210 2260 2440
280
200 3620 3840 5210 3210 3360 4040 2750 2830 3140
200 3210 3390 4410 2790 2900 3380 2320 2380 2580 1) Perm. stroke
320
220 3770 4000 5450 3340 3490 4200 2850 2930 3250 length
Mounting style CDH1: MS2
AL MM Permissible stroke lengths at Max. available
Ø Ø 100 bar 160 bar 250 bar Befestigungsart
stroke CDH1: MS2Installation
0° 45° 90° 0° 45° 90° 0° 45° 90° lengths
22 825 840 885 645 650 665 370 375 410
40 0°
28 1305 1350 1535 1085 1110 1180 875 885 910
28 1075 1100 1175 855 865 890 610 625 675
50
36 1680 1750 2000 1430 1465 1590 1175 1190 1240 1)
2000
36 1405 1440 1570 1135 1155 1200 895 900 920
63
45 2000 2000 2000 1760 1810 1990 1460 1480 1555
45 1730 1780 1960 1410 1435 1500 1000 1050 1155
80
56 2000 2000 2000 2000 2000 2000 1785 1820 1920
56 2110 2180 2440 1740 1770 1870 1140 1220 1440
100
70 3000 3000 3000 2620 2710 3000 2210 2260 2400
70 2600 2695 3000 2170 2210 2360 1400 1480 1820
1)
125 45°
90 3000 3000 3000 3000 3000 3000 2890 2970 3000
90 3000 3000 3000 3000 3000 3000 2585 2635 2800
140
100 3000 3000 3000 3000 3000 3000 3000 3000 3000
3000
100 3000 3000 3000 3000 3000 3000 2760 2810 2990
160
110 3000 3000 3000 3000 3000 3000 3000 3000 3000
110 3000 3000 3000 3000 3000 3000 2940 3000 3000
180
125 3000 3000 3000 3000 3000 3000 3000 3000 3000
125 3000 3000 3000 3000 3000 3000 3000 3000 3000
200
140 3000 3000 3000 3000 3000 3000 3000 3000 3000
1)
140 5090 5370 6000 4490 4670 5470 3820 3910 4260
220 90°
160 6000 6000 6000 5510 5800 6000 4850 5020 5750
160 5790 6000 6000 5150 5370 6000 4420 4540 4990
250
180 6000 6000 6000 6000 6000 6000 5420 5630 6000
6000
180 6000 6000 6000 5700 5960 6000 4930 5070 5630
280
200 6000 6000 6000 6000 6000 6000 6000 6000 6000
200 6000 6000 6000 6000 6000 6000 5200 5400 6000 1) Perm. stroke
320
220 6000 6000 6000 6000 6000 6000 6000 6000 6000 length
34/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
Formulas:
m p
Dm = ; K = kv (0.5–v)
10K
m = Moved weight in kg v1 v2
v = Stroke velocity in m/s
kv = See table on page 35
Extending:
m • 9.81 • sinα
Dp = pS –
A1 • 10 sd s
Retracting:
m • 9.81 • sinα
Dp = pS +
A3 • 10
p
pS = System pressure in bar
A1 = Piston area in cm2 (see page 3) v1
A3 = Annulus in cm2 (see page 3)
α = Angle in degrees with reference to the
horizontal plane v2
m
α
α
sd s
m
Damping length
AL Ø mm 40 50 63 80 100 125 140 160 180 200 220 250 280 320
Head side 21 20 23 25 25 25 33 33 37 37 76 81 86 90
Base side 21 20 23 25 25 25 33 33 37 37 76 81 86 90
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 35/44
AL Ø mm 40 50 63 80 100 125 140 160 180 200 220 250 280 320
kv 1 2.85 2.97 2.56 2.82 3.51 3.02 2.53 2.65 2.91 2.76 2.85 2.95 3.11 3.13
kv 2 3.1 3.25 2.85 2.85 3.52 2.91 2.53 2.93 2.95 2.95 2.93 3.1 3.12 3.07
kv 3 2.95 3.1 2.73 3.1 3.51 2.95 2.51 2.91 2.95 2.91 2.93 2.93 3.15 3.25
1000000
1
Ø320
100000 Ø280
Ø250
Ø220
Ø200
10000 Ø180
Ø160
Dm →
Ø140
1000
Ø125
Ø100
100 Ø80
Ø63
Ø50
1) Ø40
10
0 20 40 60 80 100 120 140 160 180 200
Dp →
AL = Piston Ø
1) If, for standard applications, the calculated interception point
from Dm and Dp is within the indicated area, then we
recommend that a cylinder is used without end position
damping.
36/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
10000000
Ø320/200 Ø200/125
Ø280/180 Ø180/110 2
Ø250/160 Ø160/100
1000000 Ø220/140 Ø140/90
100000
Dm →
10000
1000
Ø125/70
Ø100/56
100 Ø80/45
Ø60/36
Ø50/28
1) Ø40/22
10
20 40 60 80 100 120 140 160 180 200 220 240
Dp →
10000000
Ø320/220 Ø200/140
Ø280/200 Ø180/125 3
Ø250/180 Ø160/110
1000000 Ø220/160 Ø140/100
100000
Dm →
10000
1000
Ø125/90
Ø100/70
Ø80/56
100 Ø63/45
Ø50/36
1)
Ø40/28
10
20 40 60 80 100 120 140 160 180 200 220 240
Dp →
Spare parts
CDH1
4 18 1 7 3 18 5 7 2
18 6 18 18 6
"M / T / S"
"T / S "
"A / B"
"A / B"
10 12 16
11 14 17 17
Spare parts
CGH1
4 18 1 7 3 18 5 7 1 18
18 6 18 18 6
"M / T / S "
"T / S "
"A / B"
"A / B"
12 16 17 17
Tightening torque
1 2
Seal kits1)
CDH1 – Standard
AL = Piston Ø in mm
MM = Piston rod Ø in mm
1) = Seal kits for position measuring systems and
proximity switches have separate Material Nos.
RE 17331/09.05 CDH1 / CGH1 Hydraulics Bosch Rexroth AG 41/44
Seal kits1)
CGH1 – Standard
AL = Piston Ø
MM = Piston rod Ø
1) = Seal kits for proximity switches have separate Material Nos.
42/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
Seal kits1)
CDH1 – Standard + Option F
AL MM Material No. for seal version
Ø Ø M+F T+F S+F
22 R900861024 R900861049 R900861099
40
28 R900861025 R900861050 R900861100
28 R900861026 R900861051 R900861101
50
36 R900861028 R900861053 R900861103
36 R900861029 R900861054 R900861104
63
45 R900861031 R900861056 R900861106
45 R900861032 R900861057 R900861107
80
56 R900861034 R900861059 R900861109
56 R900861035 R900861060 R900861112
100
70 R900861037 R900861062 R900861115
70 R900861038 R900861063 R900861117
125
90 R900861040 R900861065 R900861122
90 R900861041 R900861066 R900861124
140
100 R900861042 R900861067 R900861126
100 R900861043 R900861068 R900861128
160
110 R900861044 R900861069 R900861130
110 R900861045 R900861070 R900861133
180
125 R900861046 R900861071 R900861135
125 R900861047 R900861072 R900861142
200
140 R900861048 R900861073 R900861143
Seal kits
AL = Piston Ø
44/44 Bosch Rexroth AG Hydraulics CDH1 / CGH1 RE 17331/09.05
Notes
© This document, as well as the data, specifications and other informations can be derived from our information. The details stated do not release you
set forth in it, are the exclusive property of Bosch Rexroth AG. Without their from the responsibility for carrying out your own assessment and
consent it may not be reproduced or given to third parties. verification. It must be remembered that our products are subject to a
The data specified above only serves to describe the product. No state- natural process of wear and ageing.
ments concerning a certain condition or suitability for a certain application