Professional Documents
Culture Documents
CT1 ws16
CT1 ws16
CT1 ws16
12
where UT denotes the thermal voltage, Is is the saturation current, and iL depends on the
illuminance but is considered to be constant.
In the operating point, the voltage across the diode is zero, i.e., Ud = 0.
a)* Find the current Id in the operating point.
The following one-port with the port quantities u and i is the connection of two ideal diodes.
i id1 id2
ud1 ud2
u
d)* Derive the representation of this one-port. What is its equivalent circuit diagram?
ud unull
u
e)* Find a representation of the resulting one-port with port quantities u and i. Draw its
characteristic.
Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Matriculation-No.: . . . . . . . . . . . . . . . . . . . 14
f)* Determine a representation of the one-port with the port quantities u and i. Draw its
characteristic.
Now suppose that a multi-port consists of only ideal diodes, gyrators, and transformers.
g)* Is the multi-port lossy? Justify your answer.
Finally, the following circuit with two resistors, a voltage-source, and two ideal diodes is given.
h)* Draw the characteristic of the resulting one-port in the diagram. Don’t forget to label the axes.
i/A
2V
u
1S 1S
u/V