Professional Documents
Culture Documents
Macaraeg, Czarina Mae B. Bsabe 3-1 Quiz No.4
Macaraeg, Czarina Mae B. Bsabe 3-1 Quiz No.4
MACARAEG
BSABE 3-1
QUIZ#4
1. If the steel rod shown is acted upon as shown, Compute for the total deformation of the rod.
Assume E = 200GPa and A = 25mm 2
2. A rigid beam of negligible weight is supported in a horizontal position by 2 rods made of
steel and aluminum. The properties of each rod are: Steel: L = 2m; A=1cm ; E = 200GPa.
2
Aluminum: L=1m; A=2cm ; E = 100GPa. If the length of the beam is 6m, where will the load
2
12x10 m/m C and is not free to expand, Compute the stress developed in the rod.
-6 0
6. A spring with 25 active coils cannot be accommodated within the given space, hence 5 coils
were cut. What is the stiffness(k) of the new spring?
A. Same as the original spring B. 1.25 times the original spring
C. 0.8 times the original spring D. 0.5 times the original spring.
7. A steel bolt and sleeve assembly is shown in the figure. The nut is tightened up on the tube
through the rigid end blocks until the tensile force in the bolt is 40kN. If an external load 30
kN is then applied to the end blocks, tending to pull them apart, estimate the resulting force
in the bolt.
8. Two shafts AB and BC of equal length and diameters d and 2d are made of the same material.
They are joined at B through a shaft coupling, while the ends A and C are built-in. A twisting
moment T is applied to the coupling. If T and Tc represent the twisting moments at end A
A
A. T =T
A c B. T = 4T
A c C. T = 8T
A c D. T = 16T
A c
9. What will be the elongation of a steel bar 40mm x 40mm square section when it is subjected
to an axial tensile load of 200kN, Length is 2m and modulus of elasticity E=200GPa.
10. What will be the elongation due to self weight of 6m suspended steel rod 20mm diameter
weighing 100N. Assume E = 210MPa.