Professional Documents
Culture Documents
ASTM Test Report
ASTM Test Report
ASTM Test Report
Subject: One (1) Recharged/Compatible Laser Printer Cartridges and one (1) OEM HP LaserJet
8100
Reference: American Testing Laboratory Job No. T-3647
This letter is to certify that American Testing Laboratory performed a toner usage test and density evaluation
conducted in accordance with ASTM Designations F1856-98 and F2036-00. The testing was performed on
the submitted test units (identified above). During the testing, the test printer settings were set at the printer
manufacturer factory default settings. The testing was completed on June 29, 2004.
PAGE YIELD
Test Data:
Test Results:
Based on the above test data, the following page yields of the test cartridges were calculated:
30,000
25,000
20,000
Pages
15,000
10,000
5,000
0
Test OEM
AMERICAN TESTING LABORATORY, LLC 108 John Street, Hackensack, NJ 07601 (201) 489-8573 (201) 489-9365
Test Report No. T3647-001 Rev.0 Page 2 of 2
DENSITY EVALUATION
The density evaluation was conducted in accordance with ASTM Designations F2036-00. The density
evaluation was performed starting at the first printed page produced and at an interval of 1000 pages. The
following density values were produced:
Average Density
10.00
1.47 1.43
1.00
TEST OEM
CONCLUSION:
The calculated page yield of the test cartridge exceeded the calculated page yield of the OEM cartridge by
4,305 pages. The average density of the output produced by the test cartridge (1.47) was higher than that of
the output produced by the OEM cartridge (1.43).
If you have any questions please do not hesitate to contact us at the laboratory.
We thank you for the opportunity to be of service to you and look toward being of service to you in the
future.
Sincerely yours,
Daniel Narbone
Vice President
American Testing Laboratory LLC
AMERICAN TESTING LABORATORY, LLC 108 John Street, Hackensack, NJ 07601 (201) 489-8573 (201) 489-9365