Professional Documents
Culture Documents
Steel Beam Analysis
Steel Beam Analysis
Mr. Robert
https://www.r-vite.co.uk
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 1
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
Document Control:
- - - -
Structural Engineer
Disclaimer:
This document has been prepared in accordance with the scope of Revite’s appointment
with its client and is subject to the terms of that appointment. It is confidential, addressed to
and for the sole use and reliance of Revite’s client. Revite accepts no liability for any use of
this document other than by its client and only for the purposes, stated in the document, for
which it was prepared and provided. No person other than the client may copy (in whole or in
part) use or rely on the contents of this document, without the prior written permission of a
Director of Revite. Any advice, opinions or recommendations within this document should be
read and relied upon only in the context of the document as a whole. The contents of this
document are not to be construed as providing legal, business or tax advice or opinion.
©Revite2021
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 2
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
Project Information
Notes
The dimensions used within these calculations are for design purposes only. Detailed measurements
are to be taken from site by the building contractor. Should any inconsistencies occur inform the
Engineer immediately.
The contractor is to act as the temporary works coordinator and should be competent and
experienced enough to carry out the design and installation of temporary works to B5975 in order to
maintain stability of the building and excavations.
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 3
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
ITEMS:
1. LOADING DETAILS
3. PADSTONE DESIGN
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 4
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
LOADING DETAILS:
FIRST FLOOR
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 5
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
mm A 2734
1 B
0.0
mm A 2734
1 B
4.359
0.0
mm A 2734
1 B
Live
Dead
mm A 2734
1 B
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 6
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
4.072 4.1
mm A 2734
1 B
0.0
-5.958 -6.0
mm A 2734
1 B
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 7
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
4.10
6-6
0.30
66
1.9
2.1
66
1.9
2.1
UB 203x102x23 (BS4-1)
S275
9.3
275
205000
9.3 203.2
9.3
5.4
101.8
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 8
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
1.00
1.00
1.00
1.00
1.00
169.4
50.9
1097
181.1
4.1
64.4
7.594
0.253
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 9
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
(Library item – Steel beam design title)Library item: Show beam analysis drawingLibrary item: Show
beam analysis drawingLibrary item: Show beam analysis drawingLibrary item: Show beam analysis
drawingLibrary item: Show beam analysis drawingLibrary item: Show beam analysis drawingSupport
conditionsSupport A Vertically restrained Rotationally freeSupport B Ve
rtically restrained Rotationally freeApplied loadingBeam loads Rafters,
Battens - Dead full UDL 0.15 kN/m Timber Joist - Dead full UDL 0.2 kN/m Insulation - Dead
full UDL 0.1 kN/m Ceiling & Services - Dead full UDL 0.2 kN/m Partitions
- Dead full UDL 0.5 kN/m Self Weight of Beam - Dead self weight of beam 1.1 Li
ve Load - Live full UDL 1.5 kN/mLoad combinationsLoad combination 1 Support A Dead 1.40
Live 1.60 Dead 1.40 Live
1.60 Support B Dead 1.40 Live
1.60Analysis resultsMaximum moment; Mmax = kNm; Mmin = kNmMaximum shear;
Vmax = kN; Vmin = kNDeflection; max = mm;min =
mmMaximum reaction at support A; RA_max = kN; RA_min = kNUnfactored dead
load reaction at support A; RA_Dead = kNUnfactored live load reaction at support A; R
A_Live = kNMaximum reaction at support B; RB_max = kN; RB_min =
kNUnfactored dead load reaction at support B; RB_Dead = kNUnfactored live
load reaction at support B; RB_Live = kNSection detailsSection type; Steel grade; Fr
om table 9: Design strength pyThickness of element; max(T, t) = mmDesign
strength; py = N/mm2Modulus of elasticity; E = N/mm2Library item:
Section details outputLibrary item: Show beam section sketchLateral restraintLibrary item: Lateral
restraint header Span 1 has full lateral restraintLibrary item: Lateral restraint
outputEffective length factorsEffective length factor in major axis; Kx = Effective length factor in
minor axis; Ky = Effective length factor for lateral-torsional buckling; K
LT.A = ;Library item: Effective length factor output KLT.B = ;Library item: Eff
length factor x1 outputClassification of cross sections - Section 3.5 = [275 N/mm2 / py] =
Library item: Classification headingInternal compression parts - Table 11Depth of section; d = mm
d / t = 31.4 <= 80 ; Class 1 plasticLibrary item: Internal comp class
outputOutstand flanges - Table 11Width of section; b = B / 2 = mm b / T = 5.5
<= 9 ; Class 1 plasticLibrary item: Outstand flange class
outputLibrary item: Classification resultShear capacity - Section 4.2.3Design shear force; Fv =
max(abs(Vmax), abs(Vmin)) = kNLibrary item: Design shear header d / t < 70 Library item:
Shear slenderness outputWeb does not need to be checked for shear bucklingLibrary item: General
results outputShear area; Av = t D = mm2Design shear resistance; Pv = 0.6 py
Av = kNLibrary item: Shear resistance plastic outputPASS - Design shear resistance exceeds design
shear forceLibrary item: General results outputMoment capacity - Section 4.2.5Design bending moment;
M = max(abs(Ms1_max), abs(Ms1_min)) = kNmLibrary item: Design bending header outputMoment
capacity low shear - cl.4.2.5.2; Mc = min(py Sxx, 1.2 py Zxx) = kNmLibrary item:
Moment capacity lo shear outputPASS - Moment capacity exceeds design bending momentLibrary item:
General results outputCheck vertical deflection - Section 2.5.2Consider deflection due to live
loadsLimiting deflection;; lim = Ls1 / 360 = mmMaximum deflection span 1;
= max(abs(max), abs(min)) = mmLibrary item: Deflection outputPASS - Maximum deflection does not
©Revite2021
Project: Sheet No. /Rev.
Robert And Miriama -Location: 68 Gosden Hill Road 10
Guildford Surrey GU4 7JD
Job Ref.: Calc By: Calc Date:
Head Office: Nov 2021 Aqeel Jadoon 11/26/2021
268 Bath Road
Slough, England, SL1 4DX
Tel:0175 337 6991 Doc Ref.: Checked By: Checked Date:
Email:info@r-vite.co.uk
Web: www.r-vite.co.uk
PADSTONE DESIGN
©Revite2021