Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Calibration of Dropper Bottle

Make Pour 20mL of Adjust water Write down


dropper full water to level to 22mL volume and
with water graduated or more drops to get
cylinder using drops it.

Repeat
process 3
times and
record.

Preparation of NaOH Solution

Weigh bottle Take cap off Pour 50mL Secure top


with NaOH from bottle. water into cover and
pellets. bottle shake
Weigh Solve for Using 1.00g/mL Solve for
solution with mass of as density, morality of
solve final
bottle. water solution
dilution volume

Preparation of Phenolphthalein Solution


Open Close bottle
dropper and and mix till
pour alcohol homogenous.
until full

Dilution of Vinegar
Weigh Fill Pour 5mL of Pour liquid
Erlenmeyer graduated vinegar, into another
flask, and cylinder record container.
record 10mL water volume
Pour 10mL Write down Solve for
water along volume of diluted
walls and wash volume of
clean device vinegar

Titration of Diluted Vinegar

Measure Pour 3mL Measure Drop 1-3 drops


mass of vinegar mass of phenolphthalein
empty solution into solution with
Erlenmeyer Erlenmeyer solution
container
flask flask

Empty water make Clean bottle Shake and


dropper dropper full three times Squeeze
bottle with solution with NaOH contents out
and label solution
through
drops
make Drop NaOH Mix contents Drop and mix
dropper full bit by bit to of solution until slight
with solution flask every drop. pink appears.
and label

Repeat two
more times.

Calculations
Average Solve for Solve for Do the same
drops per mL molarity of concentration but for the
of liquid NaOH of acetic acid undiluted
dropped solution in diluted sample
vinegar

You might also like