Professional Documents
Culture Documents
Series: - Care Motion - Industrial Motion
Series: - Care Motion - Industrial Motion
series
Product Segments TiMOTION’s TA23 series is a compact linear actuator primarily used for
medical applications that require high force and high speed. This linear actuator
• Care Motion also has the ability to save installation space by mounting the control box to
• Industrial Motion the actuator. The TA23 linear actuator is available with IP rating up to IP66W. It
also has Hall sensors for position feedback. The TA23 also has manual release
option which can be used for patient hoist applications.
General Features
1
series
TA23 Drawing
Standard Dimensions
(mm)
ø26
35
88.1
30
106
162.2
42.5
26.8
30
Retracted Length 88.1
2
series
TA23 Load and Speed
CODE Load (N) Self Locking Typical Current (A) Typical Speed (mm/s)
Force (N)
Push Pull No Load With Load No Load With Load
32V DC 24V DC 32V DC 24V DC
Note
1 Please refer to the approved drawing for the final authentic value.
2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control
boxes have this feature built-in.
4 The current & speed in table are tested when the actuator is extending under push load.
5 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance
depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage
output will be around 24V DC)
K, R, Y, B ≥ 8000 450
D, L = 6000 600
3
series
TA23 Performance Data (24V DC Motor)
40.0
35.0
30.0
25.0
Speed (mm/s)
20.0 H
15.0
G
10.0
F
J
5.0 C
D K
0.0
0 2000 4000 6000 8000 10000
Load (N)
6.0
5.0
K
4.0
J
C D
F
Current (A)
3.0 G
H
2.0
1.0
0.0
0 2000 4000 6000 8000 10000
Load (N)
4
series
TA23 Performance Data (24V DC Motor)
40.0
35.0
30.0
25.0
P
Speed (mm/s)
20.0
15.0 O
N
10.0
Q
T
5.0
L R
0.0
0 2000 4000 6000 8000 10000
Load (N)
6.0
R
5.0
Q
T L
O N
4.0
Current (A)
P
3.0
2.0
1.0
0.0
0 2000 4000 6000 8000 10000
Load (N)
5
series
TA23 Performance Data (24V DC Motor)
40.0
35.0
30.0
25.0
Speed (mm/s)
20.0
15.0
W
10.0 Z
U
5.0 Y
B
0.0
0 2000 4000 6000 8000 10000
Load (N)
6.0
Z Y B
5.0
W U
4.0
Current (A)
3.0
2.0
1.0
0.0
0 2000 4000 6000 8000 10000
Load (N)
6
TA23 Ordering Key
TA23 Version: 20181206-I
Rear Attachment 2 = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2
(mm) 3 = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2
See page 10 C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing
Front Attachment 1 = P unched hole on inner tube + plastic cap, without slot, 6 = Punched hole on inner tube, without slot, hole 12.2
(mm) hole 10.2, with plastic bushing 7=A luminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2
See page 10 2 = P unched hole on inner tube + plastic cap, without slot, 8=A luminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2
hole 12.2
9=A luminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2,
3 = P lastic, U clevis, slot 8.2, depth 20.2, hole 10.2 (for load with plastic T-bushing
push < 4000N & pull < 2500N)
J=A luminum casting, without slot, hole 10.2, for dental chair
4 = P lastic, U clevis, slot 8.2, depth 20.2, hole 12.2 (for load
push < 4000N & pull < 2500N)
5 = P unched hole on inner tube, without slot, hole 10.2, with
plastic bushing
Direction of 1 = 0° 3 = 90°
Rear Attachment
(Counterclockwise)
See page 11
Color 1 = Black 2 = Grey (Pantone 428C)
Connector 1 = DIN 6P, 90° plug D = Extension cable, not E = Molex 8P, plug M = DIN 4P, dental chair
See page 12 2 = Tinned leads preset on motor cover F = DIN 6P, 180° plug, for plug (40510-143,
(cable legth 120mm) TEC extension cable standard)
4 = Big 01P, plug
R = Extension cable, preset standard option N = DIN 4P, dental chair
C = Y cable (for direct cut on motor cover (cable G = Audio plug plug (40510-040)
system, water proof, legth 50mm)
anti pull)
Cable Length (mm) 0 = Straight, 100 5 = Straight, 1500 B~H = For direct cut system. See page 12
1 = Straight, 500 6 = Straight, 2000 J = For socket attached on motor, not preset attached on
2 = Straight, 750 7 = Curly, 200 motor cover. See page 12
3 = Straight, 1000 8 = Curly, 400 R = For socket attached on motor, preset attached on
motor cover. See page 12
4 = Straight, 1250
7
TA23 Patient Hoist Ordering Key
TA23 Version: 20181206-I
Rear Attachment C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing
(mm)
See page 10
Front Attachment F = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with T-bushing, manual release
(mm)
See page 10
Direction of 1 = 0°
Rear Attachment
(Counterclockwise)
See page 11
Color 1 = Black 2 = Grey (Pantone 428C)
8
TA23 Ordering Key Appendix
1. Calculate A+B+C = Y
2. Retracted length needs to ≥ Stroke+Y
A. C.
Front Rear Attach. Spindle Load (N)
Attach. Functions
General For Patient Hoist General For Patient
Hoist
1, 2, 5, 6 +163 - < 6000 = 6000 = 8000 = 10000
3, 4 +188 - 0 - - - - -
7, 8, 9 +178 - 1 - - - - -
J +166 - 2 +5 +8 +8 +8 -
F - +250 3 +5 +8 +8 +8 -
6 - - - - -
B. Note
Stroke (mm) Load (N) 1 If front attach. is #1, 2, 5, 6: C = follow top table
General For Patient 2 If front attach. is others: C = 0
Hoist
< 6000 = 6000 = 8000 = 10000
25~150 - - - +6 -
151~200 - - +5 +11 -
201~250 - +5 +10 +16 -
251~300 - +10 +15 +21 +5
301~350 +5 +15 +20 +26 +10
351~400 +10 +20 +25 +31 +15
401~450 +15 +25 +30 +36 +15
451~500 +20 +30 x x x
501~550 +25 +35 x x x
551~600 +30 +40 x x x
601~650 +35 x x x x
651~700 +40 x x x x
701~750 +45 x x x x
751~800 +50 x x x x
801~850 +55 x x x x
851~900 +60 x x x x
901~950 +65 x x x x
951~1000 +70 x x x x
9
TA23 Ordering Key Appendix
2 = Aluminum casting, U clevis, slot 3 = Aluminum casting, U clevis, slot C = Aluminum casting, U clevis,
8.2, depth 17.0, hole 10.2 8.2, depth 17.0, hole 12.2 slot 8.2, depth 17.0, hole 10.2, with
plastic T-bushing
ø10.2 ø12.2 ø10.2
R12.5 R12.5 R12.5
25
25
25
ø18
26
26
26
17 12.5 17 12.5 17 12.5
8.2
8.2
8.2
Front Attachment (mm)
1 = Punched hole on inner tube + 2 = Punched hole on inner tube + 3 = Plastic, U clevis, slot 8.2, depth 4 = Plastic, U clevis, slot 8.2, depth
plastic cap, without slot, hole plastic cap, without slot, hole 20.2, hole 10.2 (for load push < 20.2, hole 12.2 (for load push <
10.2, with plastic bushing 12.2 4000N & pull < 2500N) 4000N & pull < 2500N)
ø26
ø26
ø26
ø26
ø29.7
ø29.7
8.2
8.2
ø10.2 ø12.2 ø10.2 ø12.2
ø30
ø30
32
32
20 20
5 = Punched hole on inner tube, 6 = Punched hole on inner tube, 7 = Aluminum casting, U clevis, slot 8 = Aluminum casting, U clevis, slot
without slot, hole 10.2, with without slot, hole 12.2 6.2, depth 17.0, hole 10.2 6.2, depth 17.0, hole 12.2
plastic bushing
ø26
ø26
ø26
ø26
ø10.2 ø12.2
6.2
6.2
ø10.2 ø12.2
25.8
25.8
17 17
9 = Aluminum casting, U clevis, slot J = Aluminum casting, without slot, F = Aluminum casting, U clevis, slot
6.2, depth 17.0, hole 10.2, with hole 10.2, for dental chair 8.2, depth 19.0, hole 10.2, with
plastic T-bushing T-bushing, manual release
ø10.2
ø26
ø26
27.5
ø10.2
6.2
ø10.2
8.2
27.5
26
27.8
ø26
17
19
10
TA23 Ordering Key Appendix
1 = 0° 3 = 90°
Wire Definitions
CODE Pin
1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue)
1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A
2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A
3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch
4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch
5 extend (VDC+) N/A upper limit switch common retract (VDC+) lower limit switch
11
TA23 Ordering Key Appendix
Connector
4
50
D = Extension cable, not preset on R = Extension cable, preset on motor E = Molex 8P, plug F = DIN 6P, 180° plug, for TEC
motor cover (cable legth 120mm) cover (cable legth 50mm) extension cable standard option
50
120
G = Audio plug M = DIN 4P, dental chair plug (40510- N = DIN 4P, dental chair plug (40510-
143, standard) 040)
Terms of Use
The user is responsible for determining the suitability of TiMOTION products for a specific application.
TiMOTION products are subject to change without prior notice.
12