Professional Documents
Culture Documents
PC450 PC450LC: Standard Equipment
PC450 PC450LC: Standard Equipment
PC450-8
• Boom holding valve bushings —PC450-8, 600 mm 24" triple grouser
• Cab, capable OPG (OPG) with optional • Multi-function color monitor —PC450LC-8, 600 mm 24" triple grouser
bolt-on top guard • Power maximizing system • Travel alarm
• Corrosion resistor • PPC hydraulic control system • Two settings for boom
•
•
•
Counterweight, 9220kg 20,330lb
Dry type air cleaner, double element
Electric horn
•
•
•
Radiator & oil cooler dust proof net
Rear reflector
Rear view mirror (RH, LH)
• Working light, 2 (boom and RH)
• Working mode selection system
PC450LC-8
• Engine, Komatsu SAA6D125E-5 • Seat belt, retractable
PC
450
OPTIONAL EQUIPMENT
HYDRAULIC EXCAVATOR
• Air conditioner with defroster, • Cab front guard • Shoes, triple grouser shoes
hot & cool box —Full height guard —PC450-8
• Alternator, 60 ampere, 24 V —Half height guard 700 mm 28"
• Arm, 3380 mm 11'1" arm assembly • Heater with defroster —PC450LC-8
• Batteries, 140 Ah/2 x 12 V • Rear view mirror (rear and sidewise) 700 mm 28"
• Bolt-on top guard, (Operator Protective • Rear view monitoring system • Track frame undercover
Guards level 2 (OPG)) • Seat, suspension • Variable track gauge
• Boom, 7060 mm 23'2" • Service valve • Working lights (2 on cab)
• Cab accessories • Seat, suspension with heater
—Rain visor
—Sun visor
Safety Design
• Cab dedicated to hydraulic excavator for protecting the
Photo may include optional equipment.
operator in the event of machine of a rolls over accident.
• Anti-slip plates for safe work on machine
• Rear view monitoring system for easy checking behind the machine (optional) Variable Track Gauge (optional)
• Greatly increases lateral stability
See page 7.
• Compliant with transportation regulations
See page 5.
2 3
further reduces fuel Work priority ● Lateral stability is significantly improved when operating
P P mode with the gauge extended.
Komatsu develops and produces all major consumption, but
components, such as engines, electronics maintains the P-mode-like working equipment speed for light ● Lateral stability is increased by 30% (compared with the
and hydraulic components, in house. duty work. fixed gauge version).
With this “Komatsu Technology,” and adding
You can select Power or Economy modes using a one-touch ● With trackframes retracted, overall width complies with
customer feedback, Komatsu is achieving
operation on the monitor panel depending on workloads. many local transportation regulations.
great advancements in technology.
To achieve both high levels of productivity Electronic control
Eco-gauge that Assists Energy-saving Operations
unit for engine Engine
and economical performance, Komatsu has Heavy duty HPCR (High Pressure
Common Rail) system Equipped with the Eco-gauge that can be recognized at a
developed the main components with a total Electronically controlled cooled
EGR system glance on the right of the multi-function color monitor for
control system. The result is a new genera-
environment-friendly
tion of high performance and environment
energy-saving opera-
friendly excavators.
tions. Allows focus on Smooth Loading Operation Return hoses
operation in the green Two return hoses improve
range with reduced CO2 hydraulic performance. In the arm
Environment-friendly Clean Engine
emissions and efficient out function, a portion of the oil is
The PC450-8 gets its exceptional power and work capacity fuel consumption. returned directly to the tank
from a Komatsu SAA6D125E-5 engine. Output is 257 kW
Eco-gauge providing smooth operation.
345 HP, providing increased hydraulic power and improved
fuel efficiency. Two-mode Setting for Boom
Idling Caution
Komatsu SAA6D125E-5 engine meets EPA Tier 3 and EU
Smooth mode provides easy operation for gathering blasted
Stage 3A emission regulations with NOx emission reduced To prevent unnecessary
rock or scraping down operation. When maximum digging
by 40%. fuel consumption, an idling
force is needed, switch to Power mode for more effective
The SAA6D125E-5 engine adopts the electronically caution is displayed on the
excavating.
controlled Heavy Duty HPCR* fuel injection system and monitor, if the engine idles
cooled EGR system with electronically controlled bypass- for 5 minutes or more. Smooth mode Power mode
4 5
WORKING ENVIRONMENT
Safety Features
Cab Dedicated to Hydraulic Excavator Lock Lever
The cab is designed specifically for hydraulic excavators and Locks the hydraulic
gains reinforced strength from the pipe-structured cab frame- pressure to prevent
work. The cab framework provides the high durability and unintentional move-
impact resistance with very high impact absorbency. The ment. Neutral start
seat belt keeps the operator in the seat of the cab during a function allows
roll over. machine to be started
only in lock position.
Low Cab Noise Wide Newly-designed Cab Automatic Air Conditioner Thermal and Fan Guards
The newly-designed cab is highly rigid Newly-designed wide spacious cab (optional) Thermal and fan guards are
and has excellent sound absorption includes seat with reclining backrest. Enables you placed around high-
ability. Thorough improvement of noise The seat height and longitudinal incli- to easily and temperature parts of the
source reduction and use of low noise nation are easily adjusted using a pull- precisely set engine and fan drive.
engine, hydraulic equipment, and air up lever. You can set the appropriate cab atmos-
conditioner allows this machine to operational posture of armrest together phere with
generate a low level of noise. with the console. the instru-
Reclining the seat further enables you ments on the large LCD.
Low Vibration with Cab Damper to place it into the fully flat state with The bi-level control function keeps the
Mounting the headrest attached. operator's head and feet cool and
PC450-8 uses viscous damper mount- warm respectively. This improved air
ing for cab that incorporates longer flow function keeps the inside of the Anti-slip Plates
stroke and the addition of a spring. cab comfortable throughout the year.
Highly durable anti-slip
The new cab damper mounting Defroster function keeps front glass Large Serrated Steps Large Handrail
plates maintain superior
combined with high rigidity deck aids clear.
traction performance for
vibration reduction at operator seat.
the long term.
Rubber
Pressurized Cab
Spring
Silicon
Optional air conditioner, air filter and a
Oil
higher internal air pressure (+9.0 mm
Aq +0.35"Aq) prevent external dust
from entering the cab.
6 7
MAINTENANCE FEATURES
Large LCD Color Monitor Easy Maintenance
Large Multi-lingual LCD Monitor Easy Access to Engine Oil Filter Equipped with Long-life Oil, Filter
A large user-friendly color monitor and Fuel Drain Valve Fuel Pre-filter Uses high-performance
1 2 3
enables safe, accurate and smooth work. Engine oil dipstick and fill, and fuel (with Water Separator) filtering materials and
Improved screen visibility is achieved by filter are mounted on same side to Removes water and long-life oil. Extends the
7 improve accessibility. Fuel drain valve
the use of TFT liquid crystal display that contaminants in the oil and filter replacement
can easily be read at various angles and are remotely mounted to improve fuel to prevent fuel interval.
lighting conditions. Simple and easy to accessibility. problems. Hydraulic oil filter
6
(Eco-white element)
operate switches. Function keys facilitate 4 5 Engine oil &
multi-function operations. Large Capacity Air Cleaner Engine oil filter every 500 hours
Displays data in 12 languages to globally Large capacity air cleaner is Hydraulic oil every 5000 hours
support operators around the world. 8 comparable to that of larger machines. Hydraulic oil filter every 1000 hours
The larger air cleaner can extend air
cleaner life during long-term operation Long Work Equipment Greasing
and prevents early clogging and Interval
resulting
High quality BMRC bushings and resin
1 2 3
Function power
shims are optionally available for work
Basic switches decrease.
operation
4 5 6 equipment pins excluding bucket,
Indicators switches
Reliability is
extending greasing interval to 500 hours.
1 Auto-decelerator 5 Hydraulic oil temperature gauge improved by a
2 Working mode 6 Fuel gauge
new seal Large Fuel Tank Capacity
3 Travel speed 7 Eco-gauge
4 Engine water 8 Function switches menu
Air conditioner design.
temperature gauge operation Large fuel tank capacity extends
switches operating hours before refueling. Fuel
Basic operation switches
tank is treated for rust prevention and
1 Auto-decelerator 4 Buzzer cancel
2 Working mode selector 5 Wiper Fuel Drain Valve improved corrosion resistance.
3 Traveling selector 6 Windshield washer
Swing circuit . . . . . . . . . . . . . . . . 27.9 MPa 285 kgf/cm2 4,050 psi Operating weight including 7060 mm 23'2" one-piece boom,
Pilot circuit . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kgf/cm2 470 psi 3380 mm 11'1" arm, SAE heaped 1.9 m3 2.49 yd3 bucket, rated
Hydraulic cylinders: capacity of lubricants, coolant, full fuel tank, operator, and standard
Dent Preventing (Number of cylinders – bore x stroke x rod diameter) equipment.
Plates Boom . . . . . 2 – 160 mm x 1570 mm x 110 mm 6.3" x 61.8" x 4.3"
Arm . . . . . . 1 – 185 mm x 1985 mm x 130 mm 7.3" x 78.1" x 5.1" PC450-8 PC450LC-8
Bucket. . . . . . 1 – 160 mm x 1270 mm x 110 mm 6.3" x 50" x 4.3"
Operating Ground Operating Ground
Shoes Weight Pressure Weight Pressure
Photo may include optional equipment. Full Roller Guard 80.7 kPa 76.8 kPa
600 mm 43320 kg 44320 kg
DRIVES AND BRAKES 0.82 kgf/cm2 0.78 kgf/cm2
Quarry Bucket 23.6" 95,500 lb 97,710 lb
11.7 psi 11.1 psi
PC450-8 bucket is designed exclusively for quarry use and is Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals 69.9 kPa 66.5 kPa
higher strength for impact and wear. Various parts of work 700 mm 43740 kg 44770 kg
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic 0.71 kgf/cm2 0.68 kgf/cm2
equipment are also strengthened. 27.6" 96,430 lb 98,700 lb
Maximum drawbar pull. . . . . . . . . . . . . . 330 kN 33700 kgf 74,300 lb 10.1 psi 9.64 psi
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph
(Auto-Shift) Mid. . . . . . . . . . . . . . . . . . 4.0 km/h 2.5 mph
O-ring Added (Auto-Shift) Low . . . . . . . . . . . . . . . . . 3.0 km/h 1.9 mph
Side Reinforcement Plate O-ring is added between Double-flange Track Roller
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
16 mm 0.63” thickness high- bucket and linkage to prevent Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
tensile strength steel used. entrance of dirt.
DIMENSIONS
WORKING RANGE
(m)
H
Arm Length 3380 mm 11'1" 12
11
A Max. digging height 10925 mm 35'10"
10
B Max. dumping height 7625 mm 25' 0" 9
C Max. digging depth 7790 mm 25' 7" 8
7
D Max. vertical wall digging depth 6600 mm 21'8" 6
E Max. digging depth of cut for 8' level 7650 mm 25'1" A 5
General purpose use, material density up to 1.8 ton/m3 1.52 U.S. ton/yd3
* Quarry bucket
12
PC450-8 Arm: 3380 mm 11'1" Bucket: 1.9 m3 2.49 yd3 SAE heaped Shoe: 600 mm 23.6" triple grouser
A MAX 9.0m 29’ 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5m *6000 kg 5850 kg
24' *13,200 lb 12,900 lb
6.0m *6000 kg 4850 kg 8750 kg 5700 kg *9600 kg 8200 kg
19' *13,200 lb 10,700 lb 19,300 lb 12,600 lb *21,200 lb 18,100 lb
4.5m *6200 kg 4250 kg 8550 kg 5500 kg *10600 kg 7800 kg *12800 kg 11500 kg
14' *13,600 lb 9,400 lb 18,900 lb 12,200 lb *23,300 lb 17,200 lb *28,200 lb 25,400 lb
3.0m 6350 kg 3950 kg 8300 kg 5300 kg 11400 kg 7350 kg *14950 kg 10650 kg *20900 kg 16850 kg
9' 14,000 lb 8,700 lb 18,300 lb 11,600 lb 25,100 lb 16,200 lb *33,000 lb 23,500 lb *46,100 lb 37,200 lb
1.5m 6200 kg 3800 kg 8000 kg 5050 kg 10900 kg 6900 kg 15850 kg 9950 kg *17650 kg 15450 kg
4' 13,700 lb 8,400 lb 17,700 lb 11,100 lb 24,000 lb 15,300 lb 34,900 lb 21,900 lb *38,900 lb 34,100 lb
0m 6350 kg 3850 kg 7800 kg 4850 kg 10550 kg 6600 kg 15300 kg 9450 kg *17800 kg 14950 kg
0' 14,000 lb 8,500 lb 17,200 lb 10,700 lb 23,300 lb 14,600 lb 33,700 lb 20,800 lb *39,200 lb 32,900 lb
-1.5m 6800 kg 4150 kg 7700 kg 4750 kg 10400 kg 6450 kg 15050 kg 9250 kg *22950 kg 14950 kg
-4' 15,000 lb 9,200 lb 17,000 lb 10,500 lb 22,900 lb 14,200 lb 33,200 lb 20,400 lb *50,600 lb 32,900 lb
-3.0m 7750 kg 4800 kg 7750 kg 4750 kg 10400 kg 6450 kg 15100 kg 9300 kg *20950 kg 15100 kg *21700 kg *21700 kg
9' 17,100 lb 10,600 lb 17,100 lb 10,500 lb 22,900 lb 14,200 lb 33,300 lb 20,500 lb *46,200 lb 33,300 lb *47,800 lb *47,800 lb
-4.5m *9100 kg 6050 kg *10350 kg 6600 kg *13750 kg 9500 kg *17700 kg 15450 kg *22350 kg *22350 kg
-14' *20,100 lb 13,400 lb *22,800 lb 14,600 lb *30,400 lb 20,900 lb *39,100 lb 34,100 lb *49,300 lb *49,300 lb
-6.0m *8050 kg *8050 kg *9450 kg *9450 kg *12600 kg *12600 kg
-19' *17,700 lb *17,700 lb *20,800 lb *20,800 lb *27,700 lb *27,700 lb
PC450LC-8 Arm: 3380 mm 11'1" Bucket: 1.9 m3 2.49 yd3 SAE heaped Shoe: 600 mm 23.6" triple grouser
A MAX 9.0m 29’ 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *6000 kg 5950 kg
24' *13,200 lb 13,200 lb
6.0m *6000 kg 4950 kg *8850 kg 5800 kg *9600 kg 8350 kg
19' *13,200 lb 10,900 lb *19,500 lb 12,800 lb *21,200 lb 18,400 lb
4.5m *6200 kg 4350 kg *9250 kg 5650 kg *10600 kg 7950 kg *12800 kg 11700 kg
14' *13,600 lb 9,600 lb *20,400 lb 12,400 lb *23,300 lb 17,500 lb *28,200 lb 25,800 lb
3.0m *6550 kg 4000 kg 9400 kg 5400 kg *11750 kg 7500 kg *14950 kg 10850 kg *20900 kg 17150 kg
9' *14,500 lb 8,900 lb 20,800 lb 11,900 lb *25,900 lb 16,500 lb *33,000 lb 23,900 lb *46,100 lb 37,800 lb
1.5m 7150 kg 3900 kg 9150 kg 5150 kg 12450 kg 7050 kg *16650 kg 10100 kg *17650 kg 15750 kg
4' 15,700 lb 8,600 lb 20,200 lb 11,300 lb 27,400 lb 15,500 lb *36,700 lb 22,300 lb *38,900 lb 34,700 lb
0m 7300 kg 3950 kg 8950 kg 4950 kg 12100 kg 6750 kg *17300 kg 9650 kg *17800 kg 15200 kg
0' 16,100 lb 8,700 lb 19,700 lb 10,900 lb 26,700 lb 14,900 lb *38,200 lb 21,200 lb *39,200 lb 33,500 lb
-1.5m 7800 kg 4250 kg 8850 kg 4850 kg 11900 kg 6600 kg *17100 kg 9450 kg *22950 kg 15200 kg
-4' 17,200 lb 9,400 lb 19,500 lb 10,700 lb 26,300 lb 14,500 lb *37700 lb 20,800 lb *50,600 lb 33,500 lb
-3.0m 8900 kg 4900 kg 8850 kg 4900 kg 11900 kg 6550 kg *16000 kg 9450 kg *20950 kg 15400 kg *21700 kg *21700 kg
-9' 19,600 lb 10,800 lb 19,600 lb 10,800 lb 26,300 lb 14,500 lb *35,300 lb 20,900 lb *46,200 lb 33,900 lb *47,800 lb *47,800 lb
-4.5m *9100 kg 6200 kg *10350 kg 6750 kg *13750 kg 9650 kg *17700 kg 15750 kg *22350 kg *22350 kg
-14' *20,100 lb 13,600 lb *22,800 lb 14,900 lb *30,400 lb 21,300 lb *39,100 lb 34,700 lb *49,300 lb *49,300 lb
-6.0m *8050 kg *8050 kg *9450 kg *9450 kg *12600 kg *12600 kg
-19' *17,700 lb *17,700 lb *20,800 lb *20,800 lb *27,700 lb *27,700 lb
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
13