Professional Documents
Culture Documents
Instructivo Mesa Giratoria de Sellado - DVH
Instructivo Mesa Giratoria de Sellado - DVH
Instructivo Mesa Giratoria de Sellado - DVH
Operation instruction of
the rotated sealant
spreading table LJZT02
Contents
Usage .................................................................................................. 3
Attention ............................................................................................ 6
Maintenance ...................................................................................... 6
1、Usage
insulation glass or act wall glass. It is a rotated table for draw double
face or contrary rotated. Revolve and vacuum sucker have auto control
equipment, it can combine glass size freedom choice sucker and stretch
arm control. Stretch arm of Special creation can guarantee the top flat
3、Main construction
Revolve prop up the device include the prop up、prop up the pole、prop
valve, singled direction valve and vacuum occurrence machine, pass the
This system consisted the spread to feel machine, after the electric
appliances, electric appliances a piece that break the machine and can
This machine body must be grounded of dry, have no the powder and
bottom, make the machine keep the level, check completely whether all
and the principal grounding spots after grounding should less than the 4
Ω。
Fix the big sucker to prop up the dish in the turn-over first last, put on to
change to deal with contact quickly, place the power supply knob switch
in the " open" position, order the feet that move the vacuum sucker
control step the switch, regulating manometer control knob, make the
vacuum degree attain the fit pressure value( according to sucker glass
prison then, do not adjust too big), according to the operation habit,
between" positive" or" anti", order first the feet that move the vacuum
sucker control step the switch( otherwise the electrical engineering do not
turn), then order to move to turn to move the feet steps the switch, can
Prop up big sucker to dish to ascend to dismantle from the turn-over first,
will change to deal with contact to change the small sucker spirit road
inside quickly, then put the glass on the small sucker, regulate the length
that prop up the pole according to the vitreous size, then turn to use to
support the pole, making prop up the tight in a bolt for coming in contact
济南利江自动化设备有限公司
JINAN LIJIANG Automation Equipment CO.,LTD
with all glass then, willing prop up a top finally. The rest is together 5.1
6、Attention
6.1When tune up to prop up the tight in a bolt for and glass contact even
empress, must will prop up a top, prop up otherwise the pole turns to
move, prop up, the round escapes from the glass, will produce the glass
6.2Big sucker in usage, doing not want will enter the barometric dint
adjusts of over high, otherwise the vacuum a glass for too bigger,
7、Maintenance
7.1 New machine through revolving of a period of time after, should open
the plank, check whether each tight firmware loosen or not moves, laying
7.2 Make to complete each time, want to clean dust and gum clearances
of the machine, combine to cover the turn over dish, keep dust from
7.3 Prop up set and prop up the pole should periodically draw the
7.4 The periodical check electricity connects whether line loose or not
PACKING LIST
No. Name Model Unit Qty. Remarks