Professional Documents
Culture Documents
Short Description For Winnc Update Installation: Operation Manual
Short Description For Winnc Update Installation: Operation Manual
Update Installation
Operation Manual
Edition 2014-09
A-5400 Hallein-Taxach/Austria
Internet: www.emco-world.com
E-Mail: service@emco.at
WinNC Update installation
1. General requirements
To install this WinNC software, administrator
rights are mandatory.
System requirements:
• WinXP SP3 and higher.
• For WinXP: minimum of 256 MB RAM
• For Win7: minimum of 1 GB RAM
www.emco-world.com
2
3
2
WinNC Update installation
3. Data backup
Before each update installation, the existing data
must be backed up.
Create a backup copy of the directory:
C:\WinNC32.
Note:
Depending on the machine that is used, the 4. Update installation
WinNC which is used or if you're working on
Start the installation by double-clicking the "up-
a machine job or on a programming job, these
date.exe" file.
selections may be different.
Follow the instructions from the installation guide.
3
WinNC Update installation
Choose language
4
WinNC Update installation
5
WinNC Update installation
6
WinNC Update installation
Filestructure
7
WinNC Update installation
8
WinNC Update installation
Choose port
Note:
Select YES to continue if you wish to perform the
To perform the ACC update, the CNC machine
check of your software.
has to be turned on and must be ready for
Download the ACC Update as described on page
service.
2.
9
WinNC Update installation
10