Professional Documents
Culture Documents
Installation Instructions For Fan
Installation Instructions For Fan
Installation Instructions For Fan
Manual for fan blade adjusting from 60 to 50Hz and back of radiator ventilation fans for
3512B Power Module
Remove the protection grid and
the bar in the middle.
Remove the cover of the hub.
Unscrew the center/hub screw
Unscrew the screws for the
hub‐washer and remove the
hub washer.
Set the positioning device on the hub
and fix it with the center/hub screw.
Tight the screw such fast as the
positioning device can be still turned
on the hub.
Please note: The positioning device are
clearly marked with the frequency 50
or 60 hz ).
Untight the clamp screw for the
blade.
Turn the blade as far as the blade
top edge and the blade bottom
edge lie against the positioning
device. Than tight the both clamp
screws again and make these
settings also at both other blades.
After all fans are adjusted, the positioning device will be removed and the hub washer will be fixed
with both screws and the center/hub screw. Be careful, that all screws are really tightened! After
that remount the hub cover, the bar in the middle and the protection grid. Also here all screws need
to be tightened!
For damages caused by improper adjustment / mounting only the operator is responsible!