3D SCANNING

3rd Semester Live Project Activity Report

COURSE NAME :-
 PGDTD & CC JULY 2019

CREATED BY :-
 Manali Gawai 190051913
 Nitin Jaid 190051942
 Nakul Gaikwad 190051958
INTRODUCTION
 3D Scanning Is A Process Which Provide The User With Extremely Accurate
Measurement And Ability To Fully Utilize, Visualize And Modify Data With
CAD.

 The Ability To Rapidly Capture High Accuracy Information Means Vast Savings
In Productivity And Time.

 Process Is Also Know As Blue Light Scanning As The Projector Lens Projects
Blue Color Light On The Object
3D SCANNER
 3D Scanner Is A Device Which Creates A 3D Model Of An Object With Reference Of
Multiple 2D Images Of The Same Object .

 3D Scanning Unit Comprises Following Key Components

1. Camera Lens

2. Projector Lens

 As Per Size Of The Component lens Having Different Scanning Area Can Be Incorporated

 Available Set Of lense Is 45mm, 75mm, 250mm And 500mm.

3D SCANNER
CALIBRATION
 Every Time A New Set Of lens Is Installed Calibration Is To Be Done.
 This Can Be Done Using The Calibration Plate
COLIN 3D

 ‘Colin 3D’ Is A Software Used In Accordance With The Scanner To Process The Scanned Images
Into Single 3D Object

PROCESS

1. Clean The Surface Using Cleaning Solution.

2. Attach Marker On Flat Surfaces Of The Object

3. Apply The Uniform Coat Of Developer On The Surface

4. Scan The Object Slightly Changing The Orientation After Every Consecutive Shot.
INSPECT PLUS

Inspect Plus Is Software Used For The Alignment Of Scanned Model And Checking The
Dimensional Accuracy

PROCESS.

1. Import The Scanned (Actual) And Cad (Nominal) Model (Data) To The Working
Environment

2. Alignment

3. Surface Comparison

4. Report Generation
SCAN COMPONENT
MANUAL PRE-ALIGNMENT
ALIGNMENTS

Types of Alignment Method

1. 3-2-1 Alignment

2. RPS Alignment

3. Best Fit Alignment

BEST FIT ALIGNMENT
RPS ALIGNMENT
SURFACE COMPARISON
CONCLUSION

 From The Above Surface Comparison A Final Report Is Generated And Sent To
The Respective Department.

 With Reference Of The Result Further Decision To Accept, Reject Or To Rework

The Component Can Be Taken By The Concerned Authority.
THANK YOU