Professional Documents
Culture Documents
Mould Theory Questions Paper
Mould Theory Questions Paper
Mould Theory Questions Paper
3K3-TE-23
M.M: 100
Time: 3 hrs.
Note
1. Part A' may be attempted in first 6 pages of Answer Sheet.
PART A4'
477 (10x2-20)
Attempt any 10 questions / fD 7 4Hi }
() What is a mould?
machine?
What type of adjustments are made in
an injection moulding
(V)
Spru
() What is the principle of blow moulding?
What is Thermoforming'?
(vi)
of centrifugal moulding.
(vi) Write two applications
(vii) Ploafe
What is vacuum
moulding process?
(x)
marks?
What are flow
(x)
process?
What are burning
defects in moulding
(xi)
1/2
runners?
slots and
What are
(xii)
yia TeI 5 T r A
2. Attempt any 5 questions/ f (5x4-20)
limitations of three plate moulding method?
What are the
in
(vi) Explain weld lines and short shot defects moulding process.
DISCUSS the construction of mould for thermo forming and give its applications
6 DIsCuss the moulding principle used in centrifugal moulding with a neat sketcn.
7.
EXplain how the construction of
mould parts is achieved in a vacuum moulding proe
What are the remedies for
moulding defects?
2/2
S e u
DR
Part 'A
1.
Attempt any 10 questions:
10x2 20
) What is cure time?
(i) What is the use of heat treatment in mould?
process
(ii) What is sprue?
(iv) What is internal undercut?
(v) State purpose of push back pins.
(vi) Name different types of runners used in moulds.
(vii) What is role of heating compression mould?
(vii) What is a use of ejector pins?
(ix) What is single cavity?
()What is the function of gates?
(xi) Define Moulding cycle.
(xii) Name any four runners.
(xii) Name different type of gates.
(xiv) Show the arrangement of 5 components in a mould.
1/4
E-2222
mould?
conventional
injection
different parts of
the
What a r e
(iv) of sprue pulers. moulding.
the types
Explain used in injection
(V) different type
of gate
machine?
Name the
moulding
(vi) functions of injection
are the shape.
What section
cross
(vi) runner
the
and explain
Sketch
(vii)
PART-B 3X 20 60
questions:
3 mould.
Attempt any in injection
used
system
one type of ejection
3. Explain any
mould.
compression
sketch explain
4. With a neat
mould.
sketch explain two plate
5. With a neat
with sketch.
functions of pot transfer
Describe the defects:
6.
of the following
remedies of different type
causes and
7. Write the
(a) Internal Voids
(b) Blistering
(c) Mould sticking
(d) Thick flash
May/June-2015 3K3-TD-19
Mould Theory-I
Time 3 hrs. ] M.M. : 100
Note
1 Part 'A' may be attempted in first 6
of Answer Sheet. pages
Part 'A
PT
1
Attempt any ten questions-2x10=200
fr
G-110
(P.T.O)
3K3-TD-19 (2)
(3) 3K3-TD-19
(1) Cavity (11) Guide Bush
(2) Core (12)'Write four defects
in compréssion
moulding
3) Cartridge Heater
Cam
(1Application ofFinger
(4) Dry Light
(14) State Sink Mark
(6) Ejector Rod
(6) Flash Attempt any five questions 4x5-20
2
T
(7) Parting Line (1) Explain Sleeve Ejection System.
(b) Draw freehand sketch of the (2) How the venting is done in mould ? Give
following parts
of mould:- example.
(8) Guide Pillar
3) Explain Best Gate for automatic degating in
two plate mould.
(9) Sprue Bush
(10) Sprue Pillar
(4) Name differenttypes of
sprue pullers.
Explain
f
any one with sketch.
K3-TD-19 (4) 2 (5
A Why heating is required in
BK3-TD-19
mould ? Explain Compression
different types of
(5) Name different types of heating methods used heaters
in compression mould.
with their uses.
used with assembly of
(6) Safety precaution Name different types of
moulds. cooling systems.
Explain any two with sketches.
of correct positioning
7) Explain the importance
of gate.
6 Name different types of Transfer Moulds.
What are the different types of runners ?
(8) Explain any one with fig. showing all Main
Explain any two with suitable sketch.
parts.
Part B
7T
3x20-60
Attempt any three questions
-
Draw a neat sketch of Injection mould &
name all the parts.
Explain the working cycle
of plate
two
of sketches.
Injection mould with the help
.