Professional Documents
Culture Documents
Lesson 5 - Modeling, Part 1
Lesson 5 - Modeling, Part 1
Email *
aegalaivan97@gamil.com
The Base/Cap Plate Schedule allows you to add square and rectangular base
plates, but not circular shapes. *
True
False
Set the distance, from the working plane, of how far in and out of the screen you
can view.
Set the distance that a member will move when the Member Move command is
used.
The Repeat command, when adding members, will give you a copy of the
member, from the left end to right end, that you just added at the point you
locate. *
True
False
https://docs.google.com/forms/d/e/1FAIpQLSc3lsIw_Jd0_anW0E-gN0shT4QA8CEanzz8cuw6HLrkEUH7QQ/viewscore?viewscore=AE0zAgDEsNREplA_U3JOHcvRQCxA4qX_2-ynRciD0LmiwDs8uoSykAMRxXFI1HggZ3_93lo 1/2
7/11/2021 Lesson 5: Modeling, Part 1
To see 3D material, instead of just stick lines, you have to use one of the
options to show the members in opaque or transparent solids. *
True
False
This content is neither created nor endorsed by Google. - Terms of Service - Privacy Policy
Forms
https://docs.google.com/forms/d/e/1FAIpQLSc3lsIw_Jd0_anW0E-gN0shT4QA8CEanzz8cuw6HLrkEUH7QQ/viewscore?viewscore=AE0zAgDEsNREplA_U3JOHcvRQCxA4qX_2-ynRciD0LmiwDs8uoSykAMRxXFI1HggZ3_93lo 2/2