Professional Documents
Culture Documents
DataSheet KTM-WP11182P 1062201 en
DataSheet KTM-WP11182P 1062201 en
KTM-WP11182P
KTM Prime
CONTRAST SENSORS
KTM-WP11182P | KTM Prime
CONTRAST SENSORS
A Ordering information
B KTM-WP11182P 1062201
D
E Illustration may differ
I
Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm
LED, RGB 1)
K Wave length
Light emission
470 nm, 525 nm, 625 nm
Vertical 2)
M
Receiving filters None
N 1)
ET: Teach-in dynamic
O
2)
In relation to long side of housing.
Mechanics/electronics
P Supply voltage
Ripple
12 V DC ... 24 V DC 1)
≤ 5 Vpp 2)
Q 1)
2)
Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
May not exceed or fall below Uv tolerances.
3)
R
Without load.
4)
With light/dark ratio 1:1.
5)
Signal transit time with resistive load.
6)
Total current of all Outputs.
S
T 2 REGISTRATION SENSORS | SICK Product data sheet | 2021-10-12 11:56:27
Subject to change without notice
KTM-WP11182P | KTM Prime
CONTRAST SENSORS
Weight 20 g
1)
Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
2)
May not exceed or fall below Uv tolerances.
3)
Without load.
4)
With light/dark ratio 1:1.
5)
Signal transit time with resistive load.
6)
Total current of all Outputs.
Ambient data
Ambient operating temperature –10 °C ... +55 °C
Classifications
ECl@ss 5.0 27270906
A ECl@ss 10.0
ECl@ss 11.0
27270906
27270906
B
ETIM 5.0 EC001820
C ETIM 8.0
UNSPSC 16.0901
EC001820
39121528
D Connection/pin assignment
Connection type Cable with M12 male connector, 4-pin, 0.2 m
E PIN assignment
BN 1 + (L+)
F WH 2 ET
BU 3 - (M)
BK 4 Q
I 21
(0.83)
0.9 (0.04)
J
9.9
12 0.5 (0.39)
(0.02)
0.5
(0.02)
3
K
(0.35)
28.5 (1.12)
9
31.5 (1.24)
25.4 (1.00)
1
2
L
(0.45)
18.3
11.4
3
(0.38)
9.7
(0.72)
M 9.7 (0.12)
3 4
305 (12.01)
(0.38)
N
O
① Optical axis, receiver
Q
R
S
T 4 REGISTRATION SENSORS | SICK Product data sheet | 2021-10-12 11:56:27
Subject to change without notice
KTM-WP11182P | KTM Prime
CONTRAST SENSORS
Adjustments
KTM Prime
1 2
Connection type
See table: Connection/Pin assignment
2 1
3 4
A Concept of operation
Setting the switching threshold (dynamic)
C
D
E
F Press the teach-in button and
keep it pressed. LED flashing
Keep the teach-in button
> 3 < 30 s pressed.
Release the teach-in button. Yellow LED will illuminate, when
emitted light is on the mark.
slowly.
Example
Dark switching Light switching
H Internal signal
received
I
Switching Switching
threshold threshold
Internal signal
received
J Output Q Output Q
K Switching characteristics
The optimum emitted light is selected automatically (at RGB variants).
Static teach-in: light/dark setting is defined using teach-in sequence.
L
Dynamic teach-in: switching output active on mark, if background is longer in the field of view during the teach-in.
The switching threshold is set in the center between the background and the mark.
If the button is pressed again within 10 s of the teach (> 20 ms < 10 s), the relative switching threshold
N
Keylock activation and deactivation: hold down teach-in button > 30 s.
Teach-in failure: yellow LED indicator and the transmitted light of the sensor flashing quickly.
For dynamic teach-in with ET signal (5 Hz) via switching output Q.
O
P
Q
R
S
T 6 REGISTRATION SENSORS | SICK Product data sheet | 2021-10-12 11:56:27
Subject to change without notice
KTM-WP11182P | KTM Prime
CONTRAST SENSORS
Sensing distance
110
100
90
80
70
60
Relative sensitivity in %
50
40
30
20
0 5 10 15 20
(0.20) (0.39) (0.59) (0.79)
Sensing distance in mm (inch)
Recommended accessories
Other models and accessories www.sick.com/KTM_Prime
A Brief description
Head A: male connector, M12, 4-pin, straight
Type
STE-1204-G
Part no.
6009932
Head B: -
B Cable: unshielded
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T 8 REGISTRATION SENSORS | SICK Product data sheet | 2021-10-12 11:56:27
Subject to change without notice
SICK at a glance
Online data sheet
SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-
tions. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and require-
ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the ma-
chine life cycle and ensure safety and productivity.
Worldwide presence:
Contacts and other locations – www.sick.com