Professional Documents
Culture Documents
Jacket Water Heater With Pump: Attachments
Jacket Water Heater With Pump: Attachments
Jacket Water Heater With Pump: Attachments
Caterpillar offers a factory-installed jacket water heater for improved cold-starting capability.
The Jacket Water Heater with the pump is a complete coolant preheater with thermostat, pump and all
required controls.
Forced circulation of the coolant delivers uniform heating throughout the entire engine, reduces wear from
cold spots and offers a significant reduction in electrical consumption.
The Jacket Water Heater operates automatically when provided contacts are supplied with a 24 Volt DC
signal from the engine.
LEHE1270-03 1
ATTACHMENTS
SPECIFICATIONS
Frequency 60 Hz 60 Hz 50 Hz 60 Hz
Power Rating
9 kW
(With Standard Thermostat)
Amperage
(With Standard Thermostat) 11 A 37.5 A 41 A 43.2 A
Power Rating
(With High Temperature Thermostat) 9 kW / 12 kW 9 kW / 10.5 kW
Amperage
(With High Temperature Thermostat) 11 A / 14.5 A 37.5 A / 50 A 41 A / 54.6 A 43.2 A / 51 A
Fixed Thermostat
38°C - 54°C (100°F - 130°F)
(Standard)
Fixed Thermostat
60°C - 71.1°C (140°F - 160°F)
(High Temperature)
Pump Power 97 W 97 W 90 W 97 W
LEHE1270-03 2
ATTACHMENTS
GENERAL DRAWING
L W
LEHE1270-03 3
ATTACHMENTS
Wiring Diagram - 208, 220 and 240 V Single Phase JWH (9 kW Heating Systems)
Wiring Diagram - 208, 220 and 240 V Single Phase JWH (10.5 kW Heating Systems)
LEHE1270-03 4
ATTACHMENTS
cat.com/electricpower
©2020 Caterpillar All
LEHE1270-03 (05/20) rights reserved.