This document provides information on non-destructive testing (NDT) methods, including visual testing (VT), liquid penetrant testing (PT), magnetic particle testing (MT), ultrasonic testing (UT), and radiographic testing (RT). It lists the applicable testing standards from organizations like ASTM and ASME for evaluating structural welds on non-tubular and tubular components, as well as pressure vessels and power boilers. The acceptance criteria for each NDT method is outlined, referring to sections of codes like AWS D1.1 and ASME VIII which specify pass/fail requirements.
G61-86 (2014) Standard Test Method For Conducting Cyclic Potentiodynamic Polarization Measurements For Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
This document provides information on non-destructive testing (NDT) methods, including visual testing (VT), liquid penetrant testing (PT), magnetic particle testing (MT), ultrasonic testing (UT), and radiographic testing (RT). It lists the applicable testing standards from organizations like ASTM and ASME for evaluating structural welds on non-tubular and tubular components, as well as pressure vessels and power boilers. The acceptance criteria for each NDT method is outlined, referring to sections of codes like AWS D1.1 and ASME VIII which specify pass/fail requirements.
This document provides information on non-destructive testing (NDT) methods, including visual testing (VT), liquid penetrant testing (PT), magnetic particle testing (MT), ultrasonic testing (UT), and radiographic testing (RT). It lists the applicable testing standards from organizations like ASTM and ASME for evaluating structural welds on non-tubular and tubular components, as well as pressure vessels and power boilers. The acceptance criteria for each NDT method is outlined, referring to sections of codes like AWS D1.1 and ASME VIII which specify pass/fail requirements.
This document provides information on non-destructive testing (NDT) methods, including visual testing (VT), liquid penetrant testing (PT), magnetic particle testing (MT), ultrasonic testing (UT), and radiographic testing (RT). It lists the applicable testing standards from organizations like ASTM and ASME for evaluating structural welds on non-tubular and tubular components, as well as pressure vessels and power boilers. The acceptance criteria for each NDT method is outlined, referring to sections of codes like AWS D1.1 and ASME VIII which specify pass/fail requirements.
G61-86 (2014) Standard Test Method For Conducting Cyclic Potentiodynamic Polarization Measurements For Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys