P&ID Checking system or sub-system from construction team to commissioning team De-Commissioning means taking out of active De-Commissioning use and dismantling of an industrial plant. System Check Synonym for „P&ID Checking“ Solving of outstanding punch points after the Post Commissioning plant has been handed over to the client. Walkdown Another synonym for „P&ID Checking“
Check, if the plant meets the specifications
Performance Testing And one more synonym for „P&ID Checking“. under normal operating conditions. Punching A punch list is created during P&ID checking.
The phase in a project after start-up of the
Checking & testing of equipment and complete plant in order to adjust, tweak, Initial Operation construction to confirm that the installation is optimize and prepare the plant for the in accordance with drawings and performance testing phase. Mechanical Completion specifications and ready for pre- What is Commissioning? commissioning OR commissioning in a safe manner and in compliance with project The phase in a project where the entire plant requirements. (all systems and sub-systems) are taken into operation. Process fluids are introduced and Start-Up (and related terms) process conditions are established with the Pre-commissioning activities usually start after intent of making products. the system achieved mechanical completion. Rev. 01 Pre-commissioning activities include: flushing ______________________________________________________ and cleaning, drying, leak testing, running-in of Pre Start-Up Safety Review PSSR equipment etc. Sometimes pre-commissioning Pre-Commissioning www.OnlineCommissioningTraining.com activities are included into mechanical Commissioning is usually the phase in a completion. project when design process fluids are www.EPCLessons.com introduced to the systems and sub-systems. Commissioning API 1FSC: „Static Commissioning“ Sometimes commissioning means running the systems with a safe fluid only. Tests and procedures that are conducted without solvents or process fluids yet Synonym for „Hot Commissioning“ Live Commissioning Dry Commissioning introduced to the plant. For example control Important Note: system sequence tests. Design process fluids are introduced in the systems and sub-systems. The intention of this document is to bring a little bit Hot Commissioning of light into the different terms used worldwide by Cold Commissioning Water or solvent has been introduced into the different companies. „To find a common systems and sub-systems. Tests and „Operating Scenarios" denominator.“ procedures conducted with water or solvents. Wet Commissioning Maybe your company understands e.g. „Wet „Operating Scenarios“ - for example running Commissioning“ completely different than your pumps in closed loops. friend’s company. This is ok. Just use the documents by your company.