Professional Documents
Culture Documents
DialogP SM Chapter 7-3!3!2008
DialogP SM Chapter 7-3!3!2008
DialogP SM Chapter 7-3!3!2008
Spare Parts List The spare parts list (edition 3/2008, edition date 2008-06-02)
is valid with immediate effect. All previous spare parts lists
are invalid.
Refurbished Spare Parts Conditions for Delivery of Refurbished Spare Parts (depending
on availability):
Defective spare parts must be sent back with the
accompanying documents (Material Return Form) to B. Braun
Avitum AG via the representative of the respective country for
the ability to supply refurbished spare parts. The condition and
the version of the defective spare parts must allow a qualified
refurbishment.
Backward Compatibility New spare parts always have article numbers with numeric
of Spare Parts characters and are backward compatible unless otherwise
specified in the spare parts list. If a spare part is modified the last
digit of the article number changes to an alphabetic character
with the initial index A. These spare parts are in principle
backward compatible to the previous article number (numeric or
alphanumeric - with or without an index). See table with an
example for the switch mode power supply SMPS.
B. Braun Avitum AG Technical Hotline (Germany): Tel. No.: +49 5661 71 3796
Schwarzenberger Weg 73 - 79 Technical Support (Germany): Tel. No.: +49 5661 71 3500
34212 Melsungen Spare Parts (Germany): Tel. No.: +49 5661 71 3662
Germany E-Mail: dialysetechnik.melsungen@bbraun.com
B. Braun Avitum AG Reason for returning the part (please tick !):
Wareneingang - Service Warranty return (replacement to be ordered separately) ---------------- "
Defective part for refurbishment -------------------------------------- "
Schwarzenberger Weg 73-79 Wrong shipment ----------------------------------------------------- "
Complaint sample (use complaint form for details) --------------------- "
D-34212 Melsungen Part returned for investigation ---------------------------------------- "
Germany Part returned for disposal by the manufacturer ------------------------- "
..........................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................
From machine type: .................................................. Serial number: ................................................. Working hours: .......................................
..........................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................
The described defect appears: Intermittently " Permanently " (please tick !)
Cleaned/disinfected: Cleaned " yes Disinfected " yes (please tick !)
Disinfectant: ......................................................................................................................................................................
This form must be attached to every spare part sent back to your B. Braun representative!
Spare parts without this form are scraped.
Please Copy!
Commissioning and Service Only trained personnel must commission and service the Dialog.
Servicing must only be performed with proper tools, calibration equipment and be in accordance
with the most recent revision of this service manual/technical information, which must be clearly
and thoroughly understood.
Prevent Electrical Shock Hazard Switch off the Dialog and disconnect unit from mains if you have to open the machine for
servicing.
Do not touch any exposed wiring or conductive surfaces while the Dialog is opened. The voltages
present when electrical power is connected to the Dialog can cause serious injury or death.
!
High voltage can be present at the backlight inverter board BIB in the TFT monitor, even if the
machine has been disconnected from mains. Pull out the battery compartment in the base
platform and switch off the battery voltage before opening the machine!
Protective Conductor in TFT Housing If the TFT housing had to be opened during a service job, the tight seat of the protective
conductors in the TFT housing must be checked.
Connection and Operation Service Board The service board must only be operated in the TSM service program. If the service board is
connected to the Dialog it is prohibited to connect a patient to the Dialog and to run a therapy.
Prevent Chemical Burns and Scalding During servicing on running machines: prevent chemical burns and scalding of the skin due to
the penetration of disinfectant or hot liquid.
Contaminated Machines Protective gear should be worn in case of servicing of assumed contaminated machines.
Cover in Rear Door Servicing of mechanical assembly groups (components in contact with fluid): the black cover in
the rear door must be assembled during servicing because it serves as a spray protection for the
assembled printed circuit boards.
Tubing Tubing must be replaced only by the same tubing type/length and identical installation manner.
Make sure that the tubings in the machine are not kinked or twisted after servicing (e.g. if sub-
racks are pulled out and inserted again). The tubing must not touch moving/rotating components
(e.g. motors of gear pumps).
Page
7.9.4.2 Rinsing Bridge 4 (Short) 7-43
7.10 TFT Monitor 7-46
7.11 Test and Calibration Equipment and Tools 7-48
7.12 Service Kits 7-50
7.13 Software 7-51
7.13.1 Compatibility Table Software 7-52
7.14 Miscellaneous 7-53
7.15 HDF Bag (Option) 7-55
7.15.1 Flow Detector 7-56
7.15.2 UF Piston Pump 7-57
7.15.3 HFS Board 7-57
7.16 Staff Call (Option) 7-58
7.17 Bicarbonate Cartridge Holder with Valve (Option) 7-59
7.17.1 BIC Cartridge Holder with Valve 7-59
7.17.2 Air Separator LAB2/Valve VBICP and Valve VVB 7-60
7.17.2.1 Valve VBICP and Valve VVB (without Air Separator LAB2) 7-61
7.17.3 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS 7-62
7.17.4 BIC Cartridge Holder Boards 7-63
7.18 HDF Online (Option) 7-64
7.18.1 Substitution Port 7-65
7.18.2 UF Sub-Rack HDF Online 7-66
7.18.3 Valve Block HDF Online 7-67
7.18.4 Boards HDF Online 7-68
Page
7.18.5 DF/HDF Filter Holder HDF Online 7-69
7.19 Automatic Blood Pressure Measurement ABPM (Option) 7-71
7.19.1 Automatic Blood Pressure Measurement ABPM Module M2000 7-71
7.19.1.1 Compatibility Table ABPM Module M2000 7-72
7.19.2 Automatic Blood Pressure Measurement ABPM Module M2005 7-73
7.19.2.1 Compatibility Table ABPM Module M2005 7-74
7.20 Battery (Option) 7-75
7.20.1 Battery Sub-Rack 7-76
7.21 Nexadia-/WAN-BSL (Option) 7-77
7.22 Card Reader (Option) 7-78
7.23 Spare Parts List Alphabetical Order 7-79
7.24 Changes/Modifications in Spare Parts List 7-95
1 B C
i 1
ii
iii
Notes for
Solenoid Valve 3451902B
Self-Locking Nut A i 1 x Screw M4
Do not readjust the self- ii 2 x Spring Washer 4.2
1a 2 locking nut A, because the nut
is assembled with a defined
iii 1 x Washer 4.2
torque (1.3 Nm ± 10 %). iv 1 x Screw 40x10
v 1 x Washer 4.2
The position of the magnet coil
can be adapted to the assembly iv
location, i.e. the coil can be
carefully turned (B or C)
without loosening the self-
v 2
locking nut A. The procedure is
only permissible if the coil can
be turned without much effort.
2,3 rods (see paragraph 7.9.2 for details). 4 3451727B 1 Throttle 0.4 bar
4 3451664B 1 Throttle 1.3 bar for Dialog with HDF online
4
4 34570683 20 O-ring 4.47 x 1.78
2, 2,3 5 6 5 3451969B 1 Heater element 120 V/1800 W lubricate thread and assemble heater
3 5 34519580 1 Heater element 240 V/1800 W element only hand-tight
TSHE
(LAB1)
16
16 EP
PE KP 2,3 18
2,3
7
7 EK
PE 17
6 17 2,12
RVE
11 2,10 9 2,8
2,
12
2,
3 2,3
2,
12
7
6
11 2,10 9 2,8
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 12
Pos. Art. No. Qty. Description Comments
Water Inlet Sub-Rack
16 34560319 1 Gear pump (Micropump Micropump version 2 (replaces Gather pump) for
EP only. EP assembled in horizontal position from
version 2) with magnet,
2,3 without motor
serial no. 22657/90207 either with adapter A or
modified degassing block B
18 19
2,3
7
Micropump Micropump
Version 1 Version 2
9 17
PE 2,
EP 12
18
2,3
7
B
EP
5
H
17
EP PE
13
VB
16 2,3 2,12
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 14
Pos. Art. No. Qty. Description Comments
7.3.1 Upline Tank
13 34560165 1 Upline tank with lid version 2
with extruded tubing connectors
15 34560246 1 Float ball incl. o-ring the o-ring B must be assembled additionally
during the assembly of the float ball A
(see figure)
13, 14
14,
15
15
A
1 2 3 4 1
1 3451663A 1 Motor
2 34770950 20 O-ring 8.0 x 1.6
3 34771140 20 O-ring 3.1 x 1.6
4 3451610B 1 END conductivity sensor
11,12, 5 3451611B 1 Bicarbonate conductivity sensor
13,14 6 34570373 10 Plug (long)
9,10 7 3451614B 1 Temperature sensor without connector
11
6 10
Micropump
Version 1
Micropump
Version 2
7 12
13
8 14
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
RVB
7,8,15
TSD A
10,16
7,8,15
9,10 TSD-S
RVFPE
2
B
3 4 3
BK1 VABK1 5
VBP 5
VDABK1
MSBK1
VABK2 VLA
LAFS 3 6 8
MSBK2
VDABK2
3 3
FBK2
C B
BK2 FPA LA
RV
C
RV
B UFP
7 7
UFP RVFPA
1 2 1 -
2 -
- Balance chamber 2
- Air separator complete
see separate figure
DDE
LA
VBP
VLA
VABK2 VDABK1
RVFPA
VEBK2 VDEBK1
VDEBK2
VEBK1
VDABK2 VABK1
1 2 1
4 3
o
180
4 3
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
4 34515330 1 Gear pump (Micropump version Micropump version 1 for FPE/FPA only.
10 1) with magnet, without motor FPE and FPA must be same type (mixed
assembly not permissible)
5, 4 3451663A 1 Motor
10 2,7
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 22
Pos. Art. No. Qty. Description Comments
7.6 Top Level Sub-Rack
7.6.1 Motherboard GX1LCD
1 3451458A 1 Hard disk drive 40 GB
2 3451404A 1 Motherboard GX1LCD ex works the BIOS of the GX1LCD is set to
BIOS version 1.9 (for SW ≥ 7.58)
1 2 3 2 34514791 1 SODIM module 64 MB
2 34519327 1 Battery BR2032, 3V
3 3451419A 1 Low voltage differential setting for TFT display: see paragraph 7.10.1
LVDS adapter setting for TFT display
signal adapter LVDS
4 34516662 1 Floppy disk drive 3.5"
LVDS 4
Red dot conductor 1
Roter Farbpunkt Ader 1
USB
ON
OFF
1 2 3 4 5 6
LVDS Adapter Version 2 DIL Switch Philips
(5.0 V)
ON
OFF
1 2 3 4 5 6
Supervisor Board SB
Supervisor Board SB 4 3451461A 1 Supervisor board version 3 for SMPS (Benning)
4 Controller Board CB
7 5 3451921B 1 Controller board 2 MB
Switch Mode Power Supply SMPS
6 - - Switch mode power supply see separate figure
BIC-KV Board
8 34560149 1 BIC cartridge holder valve BIC-KV board
6 HDF Online Power HOP Board
SMPS 9 34519475 1 HDF online power HOP board version 2
12a 34518355 1 Crank for blood pump compatible to tubing holder 11a/11b
0
12b 34560157 1 Crank for blood pump compatible to tubing holder 11b
10 11a
12a
12b
11b
Art/Kind
C114 F402 34570470 10 Fuse T5 A (TR5)
Hz P8 P2
V
A H104 F403 34518819 10 Fuse T1.25 A (TR5)
X100 P101
F600 34570179 10 Fuse M10 A (6.3 x 32 mm)
F601 34570160 10 Fuse T3.15 A (TR5)
F602 34570160 10 Fuse T3.15 A (TR5)
K3/K4 34514775 2 Relay (12 V) for 24 V
P13 P3
-
+
P9
Type
SN
C115
TN/PN XXXXXX 11 P7
Opt.
Art/Kind
C114
Hz P8 P2
V
A H104
X100 P101
2 3457058A 5 Manometer connection (white), for PBS/SN with plastic nut A and
2 3451833A 5 Manometer connection (red), for PA/PBE safety disc B (pay attention to
2 3451884A 5 Manometer connection (blue), for PV correct assembly, see left figure)
5a 5b 5c 5d for manometer connection (filter)
3 39971260 m PUR tubing 3.6 x 1.1
1,2,3,4 5 1,2,3,4 4 34516409 1 Filter
5 3451432B 1 Heparin pump Compact
HP 5a 34514732 1 Syringe holder
5b 34570640 5 Dummy plug
5c 34570667 1 Clamp
PV PA PBS/SN PBE
6,7 5d 34570659 1 Unlocking lever set
6 34570535 1 Single tubing holder ∅ 6.8 mm
SN SN
8
7 34570543 1 Double tubing holder ∅ 6.8 mm
PBA PBV 9
23, 10,11.
8 34570527 1 Single holder, small
22
x
9 34570616 5 Latch
12,13, 10 3451411B 1 Blood pump without roller without light barrier
14,15, refurbished part, without light barrier
16 10 719288B 1 Blood pump without roller
11 34516689 1 Roller 8x12 for blood pump
8 6,7 - 7703708 1 Grease SKD 4002 100 g tube (to lubricate the needle
17 bearing of the roller)
without hinge pin (see separate figure)
12 3451669E 1 Cover for blood pump
21 SAD
12a 34560025 1 Magnet ∅ 5 mm for cover
19 - 7702736 1 Extraction tool for hinge pin with interior thread tool, for hinge pin
SAKV-SG SAKA 14 34516670 1 Seal for blood pump
19a 34570675 10 Soft stopper for SAKA, set for 10 rotary magnets, with 20 x 4 mm,
4 20 34514107 1
10 x 3 mm, replaces o-ring art.. no. 34570624
Rotary magnet (currentless closed) for SAKV-SG
15
23 34570519 1 Single holder, big
21
3 mm
4 mm 4 mm 19a
12
18 20
19 20a 12a
12b
25 34560297 1 Pressure sensor board (triple) for machine with single pump
(3 pressure sensors)
26 34560300 1 Pressure sensor board (fivefold) for machine with double pump
(5 pressure sensors)
24 24
25 26
5 12 3451487A 1 ABPM module M2005 (integrated FW 4.0, see 7.19 for details
backwards compatible to
interface board) incl. assembly angle M2000/M1050
- 34514929 1 Loudspeaker
6
7,8
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 34
Pos. Art. No. Qty. Description Comments
Basic Housing
12 34518029 1 Strain relief
13 34560122 1 Double tubing connector 11xM12 stainless steel, for water inlet
- 39224538 1 Single ear clamp 17.5 for external high temperature tubing
12
13
14
8
7
2 4 39972313
5 39972305
m Silicone tubing 5 x 1.5, blue
m Silicone tubing 5 x 1.5, red
per meter
per meter
3 7 34514767
8 34570004
1 Male connector (red) with o-rings
5 O-ring 9.3 x 2.4
9 39971414 m Silicone tubing 3.2 x 1.6 per meter
4 10 3451728A 1 PE tube 4 x 1 with silicone tubing
6
7
8
9
10
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 36
Pos. Art. No. Qty. Description Comments
7.9.2 Rinsing Chambers for Concentrate Suction Rods
1 34514120 1 Retainer for suction rod
2 34514767 1 Male connector (red) with o-rings
3 34514759 1 Male connector (blue) with o-rings
4 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)
2 7 3451727B
7 3451664B
1 Throttle 0.4 bar
for Dialog with HDF online
1 Throttle 1.3 bar
7 34570683 20 O-ring 4.47 x 1.78
8 34517782 5 Disposable filter
9 VZ
3 9 34517138
- 34570306
1 Reed sensor with contacts and o-ring 3.68 x 1.78
5 Reducer tubing connector
4,5
8
5,6
7
RVDA
192 3
4,5
VZ 5,6 8
7
RVDA
5,6
1 5
3
5 3
Red 10 34517294 1 Suction set with tubing, suction port and black lid for disinfection
6 10 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection
13,12,11 10,9,8 14
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
12 3 4
16,15,14 17
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
from Dialyser 7 34560270 1 Solenoid valve 2/2 way coil straight, connector/flange (DPP)
11 34517294 1 Suction set with tubing, suction port and black lid for disinfection
VD 11 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection
14,13,12 11,10,8 15
12 3 4
16,15,14 17
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 46
Pos. Art. No. Qty. Description Comments
7.10 TFT Monitor
1 34514260 1 Touch screen for TFT
2 3451491A 1 Front panel complete with membrane
3 34514880 1 Membrane
1
2
4 5 3451429A
6 34514252
1 Optical status display board OSD
1 Backlight inverter board BIB for Philips TFT
6 34514686 1 Backlight inverter board BIB for Boe Hydis TFT
7 34514643 1 Retrofit kit TFT display required for replacement of TFT display
(Philips) against TFT display
(Boe Hydis) (Boe Hydis/Samsung)
6 34514279 1 Touch controller board until serial number 21759/90122 (and 21763..21765,
21770..21771, 21774, 21776..21777, 21784, 21797,
TCB version 1 21802, 21820, 21822..21825)
6 34514600 1 Touch controller board from serial number 21760/90123 (except 21763..21765,
21770..21771, 21774, 21776..21777, 21784, 21797,
TCB version 2 21802, 21820, 21822..21825)
5 8 7 6 5
- 7702655 1 Service board SMPS for switch mode power supply SMPS
for watchdog generation and voltage check of
SMPS
- 34560513 1 Retrofit kit LAB2 the air separator LAB2 with BICP can be
retrofitted for BIC option without
LAB2/BICP (see paragraph 7.17.2.1)
- 34560106 1 Repair kit BIC cartridge holder: for the exchange of:
valve with piercing spike version 1,
2 x valve with piercing spike version 2, 1 x swivel
swivel arm version 1 and housing
arm version 2 and 1 x housing top
top
- 770757 1 Software 7.58 USB stick for TLC/LLS, memory card for LLC
- 770759 1 Software 7.59 USB stick for TLC/LLS, memory card for LLC
- 770824 1 Software 8.24 USB stick for TLC/LLS, memory card for LLC
Note: See also chapter 6 (Tubing Diagrams) - 3784 0096 m Silicone tubing 8 x 2 per meter
- 39971007 m Silicone tubing 6 x 1.75, red per meter, internal high temperature tubing
- 39238032 1 Single ear clamp 13.3 for internal high temperature tubing
- 39972348 m Silicone tubing 8 x 3.2, red per meter, external high temperature tubing
- 39224538 1 Single ear clamp 17.5 for external high temperature tubing
AxB -
-
39971414
39972445
m
m
Silicone tubing 3.2 1.6
Silicone tubing 2 x 3, transparent
per meter
per meter
A x B Tubing -
-
39971210
34515143
m
m
Silicone tubing 2 x 1.5
PVC tubing 10 x 3, red
per meter
per meter
c bd
ef
g
3 6
7
8
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 56
Pos. Art. No. Qty. Description Comments
7.15.1 Flow Detector
1 34770925 5 Plug not upwards compatible to pos. 6,
because longer plug
6 6
2 8
3
7
5
Power Power
Board 2 Board 1
Supervisor Board
HFS
Board 2
STAT (Default)
DYN
DYNAUS
11 34517138 1 Reed sensor with contacts and o-ring bottom BIC cartridge holder
3.68 x 1.78
7 - 34517782 5 Disposable filter filter FBIC
8 11 2
6
7
9
2 10
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 60
Pos. Art. No. Qty. Description Comments
7.17.2 Air Separator LAB2/Valve VBICP and Valve VVB
1 3451906B 1 Solenoid valve 2/2 way coil straight, connector/connector (AKM)
ENDLF
RVFPE
KP
FPE
VVB
VBICP
RVB
ENDLF
RVFPE
KP
FPE
4 34770925 5 Plug
5 34770852 5 O-ring 11.1 x 1.6
6 34772626 5 Pressure spring 200 mmHg
1,2 2,3 4 7 34771352 3 Centre disc
5 8 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)
7 8 4
DBK
2,3
VBKS VBKO
DBK
VBKS
1,2
LAB1
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
1
BIC-KV
Board
Power Power
Board 2 Board 1
Supervisor Board
HFS
Board 2
PV PA PBS/SN PBE
SN SN
PBA PBV
SAD
SAKV-SG SAKA
1
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
4,5
A or A+B (A=Quadring; B=Spacer)
A A
B B
HFB VSB
DDE
VBE
4 LA
VDFF
VLA
VABK2 VDABK1
1,
3 RVFPA
VDA 2
VEBK2 3
VDEBK1
MSBK2 FPA
MSBK1
VDEBK2 VSAA
VEBK1 VSAE
VABK1
3
1,2
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
1
1
HFB HFB
2 VBE 2
VBE
VSB
VSB
3 VBP 4
VBP
1 HOP BIC-KV
Board Board
Power Power
2 Board 2 Board 1
Supervisor Board
3 HOA
Board
Controller Board
2 2 3
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
7. Spare Parts List 3/2008 7 - 70
Pos. Art. No. Qty. Description Comments
DF/HDF Filter Holder HDF Online
1 34560041 1 Filter holder complete version 2 also see filter holder version 1
3 Red/Rot
Blue/Blau
2
3 Red/Rot
Blue/Blau
1 2
POS-460 GX1LCD
34514147 (ABPM interface board M2000)
X *- *X
* The factory setting of the interface board is
for the GX1LCD motherboard.
ABPM Interface
Board M2000
R2
R3
R4
R5
R6
R7
P1 P2 Version CX.X
1
1
ON 1 2 3 4 5 6
P2 1
ON
2 3 4 5 6
P1 OFF
DIL OFF
OFF
DIL Switch
1 2 3 4 5 6
OFF
OFF
OFF
GX1LCD
ON
ON
ON
(default)
OFF
OFF
OFF
ON
ON
ON
POS-460
green/yellow
grün/gelb
blue/blau blue/blau
green/yellow brown
grün/gelb braun
brown brown
braun braun
1
BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG
Please note that the spare parts have been listed using a nomenclature
hierarchy structure, because the common approach for searching a
specific spare part would be in a structured way.
Controller board 2 MB
3451921B 1 Board, controller, 2 MB
Search for the keyword board and look for controller to find the wanted
spare part number.
Solenoid valve
Search for the keyword valve and look for solenoid to find the required 3451902B 1 Solenoid valve 2/2 way
spare part number. 3451906B 1 Solenoid valve 2/2 way
34560270 1 Solenoid valve 2/2 way
Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification
All changes and modifications are listed since the last edition of this
spare parts list (from edition 2-2005/edition date 2006-10-11 to edition
3-2008/edition date 2008-06-02).
Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification
7-17 18 34771000 O-ring 5.0 x 1.5 34570683 O-ring 4.47 x 1.78 new art. no.
7-18 1 3451749C Piston pump 3451749E Piston pump new art. no.
7-18 2 3451789C UFP piston pump (HDF option) 3451789D Piston pump (HDF bag option) new art. no./modified purchase text
7-18 5 - - 34560556 Motor for piston pump new art. no.
7-18 6 - - 34560572 Bell joint for piston pump new art. no.
7-18 7 - - 34560602 Pump body for piston pump new art. no.
7-18 8 - - 34560564 Plastic elbow for piston pump new art. no.
7-18 - - - 7703848 Assembly jig (motor piston pump) new art. no.
7-20 3 34516654 Membrane position sensor board 3451665A Membrane position sensor board new art. no./exchange as pair only
7-21 1 - - 34560270 Solenoid valve 2/2 way new art. no.
7-21 4 3451413A Gear pump (Gather) with magnet, - - obsolete
without motor
7-21 4 34515330 Gear pump (Micropump) with - Gear pump (Micropump version 1) modified purchase text (Micropump version 1
magnet, without motor with magnet, without motor for FPE/FPA only)
7-21 6 34771000 O-ring 5.0 x 1.5 34570683 O-ring 4.47 x 1.78 new art. no.
7-21 10 34560181 Housing with lid (air separator) 3456018A Housing with lid (air separator) new art. no.
7-22 1 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.
7-22 3 34514198 Low voltage differential signal 3451419A Low voltage differential signal new art. no.
adapter LVDS adapter LVDS
7-23 1 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.
7-23 3 34514198 Low voltage differential signal 3451419A Low voltage differential signal new art. no.
adapter LVDS adapter LVDS
7-24 - - - - - new paragraph (setting for LVDS adapter)
7-25 - 34519726 Internal cover rear door 34560424 Internal cover rear door new art. no.
Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification
7-28 - 34514740 Switch mode power supply SMPS 3451474B Switch mode power supply SMPS new art. no.
version 12
7-28 - 7192878 Switch mode power supply SMPS 719287B Switch mode power supply SMPS new art. no.
version 12
7-28 F600 34570179 Fuse M10 A (TR5) - Fuse M10 A (6.3 x 32 mm) modified purchase text
7-28 K3/K4 34514775 Relay (24 V) - Relay (12 V) modified purchase text
7-28 H104 34503447 Buzzer 34560580 Buzzer new art. no.
7-28 - - - 34560416 Plug for buzzer new art. no.
7-29 - - - 3451474B Switch mode power supply SMPS new art. no.
version 12
7-29 - - - 719287B Switch mode power supply SMPS new art. no.
version 12
7-30 5 3451432A Heparin pump Compact 3451432B Heparin pump Compact new art. no.
7-30 5b - - 34570640 Dummy plug new art. no.
7-30 5c - - 34570667 Clamp new art. no.
7-30 5d - - 34570659 Unlocking lever set new art. no.
7-31 19 34560009 Rotary magnet complete 3456000A Rotary magnet new art. no./modified purchase text
7-31 19a - - 34570675 Soft stopper new art. no. (replaces o-ring art. no.
34570624)
7-31 21 3456005B SAD version 3 with red detector 3456005C SAD version 3 with red detector new art. no.
7-32 1 34516352 Pressure sensor - - new on page
7-32 25 - - 34560297 Pressure sensor board (triple) new art. no.
7-32 26 - - 34560300 Pressure sensor board (fivefold) new art. no.
7-33 1 34519629 Infusion pole 3451962A IV pole version 2 new art. no./modified purchase text
Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification
7-33 4 34511628 Mains cord, without connector - Mains cord, without connector modified purchase text
230/240 V
7-33 7 34514899 Swivel caster 3451489A Swivel caster new art. no.
7-33 8 34514902 Swivel caster with brake 3451490A Swivel caster with brake new art. no.
7-33 12 34514872 ABPM module M2005 (integrated 3451487A ABPM module M2005 (integrated new art. no.
interface board) incl. assembly interface board) incl. assembly
angle angle
7-33 - 34514929 Loudspeaker - - relocated from page 7-47 to 7-33
7-36 4 - - 34560270 Solenoid valve 2/2 way new art. no.
7-36 7 34771000 O-ring 5.0 x 1.5 34570683 O-ring 4.47 x 1.78 new art. no.
7-38 1 34570004 O-ring 9.3 x 2.4 - - obsolete
7-38 1 34514031 Valve with seal - - obsolete
7-40 7 - - 34560270 Solenoid valve 2/2 way new art. no.
7-40 14 - - 34773762 O-ring 9.25 x 1.78 new art. no.
7-42 2 - - 34560270 Solenoid valve 2/2 way new art. no.
7-42 4 3451657A Pressure sensor 3451657B Pressure sensor new art. no.
7-42 17 - - 34773762 O-ring 9.25 x 1.78 new art. no.
7-43 7 - - 34560270 Solenoid valve 2/2 way new art. no.
7-43 15 - - 34773762 O-ring 9.25 x 1.78 new art. no.
7-45 2 - - 34560270 Solenoid valve 2/2 way new art. no.
7-45 4 3451657A Pressure sensor 3451657B Pressure sensor new art. no.
7-45 17 - - 34773762 O-ring 9.25 x 1.78 new art. no.
7-47 7 34514635 TFT monitor 3451463B TFT display 15“ new art. no./modified purchase text
Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification
7-47 - 34514198 Low voltage differential signal 3451419A Low voltage differential signal new art. no.
adapter LVDS adapter LVDS
7-47 - 34514929 Loudspeaker - - relocated from page 7-47 to 7-33
7-48 - 7700857 Flow measurement set 0.1 - 1.2 770085A Flow meter 1.1 l/min new art. no./modified purchase text
l/min
7-49 - 7702035 Stopcock system with five 770203A Stopcock system with five new art. no./modified purchase text
stopcocks stopcocks, incl. lines
7-49 - - - 8255172 Original Perfusor line 50 cm new art. no.
7-49 - 7703643 Chip card - Chip card for BSL-Nexadia modified purchase text
7-49 - - - 7703856 Chip card for card reader new art. no.
7-49 - - - 770284A DCI cable, external new art. no.
7-49 - - - 7703848 Assembly jig (motor for piston new art. no.
pump)
7-50 - - - 34560513 Retrofit kit LAB2 new art. no.
7-51 - - - 770753 Software 7.53 new art. no.
7-51 - - - 7707530 Software update 7.53 new art. no.
7-51 - - - 770759 Software 7.59 new art. no.
7-51 - - - 7707590 Software update 7.59 new art. no.
7-51 - - - 770824 Software 8.24 new art. no.
7-51 - - - 7703864 Field service utility FSU version new art. no.
2.00
7-52 - - - - - extended compatibility table for software
7-53 - - - 39972445 Silicone tubing 2 x 3, transparent new art. no. (for BIC cartridge holder)
7-53 - - - 34773770 Y-Tubing connector 6 mm new art. no.
Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification