Professional Documents
Culture Documents
Serie 3000 MM - DS4112EN00 (Atual)
Serie 3000 MM - DS4112EN00 (Atual)
Inlet Outlet
Inlet Outlet
Drain
Drain
Inlet Outlet
T-Line Connection
Drain
Gauge Port
Series 3000™ C-LineGauge Port
Single-Round
Vent
Housings
Vent
Gauge Port C-Line
Vent Typically compressed In order to size a compressed gas
gas filtration. filter you need to know:
1. Flow of gas
Can also be used for venting of
2. Operating pressure
fermentor.
3. Temperature
Inlet Outlet
Inlet Outlet
Drain
C-Line Connection
2
Specifications
Description North America, Europe and Japan* Asia
3
T-line Housing Dimensions
Base Options
Gauge Port
Connection H (mm)
190
83
83
Outlet
Inlet Outlet
Inlet
Drain
Drain
190
185
73 42 45 37
52 12.7 1 2.7 9. 5
9 .5
21 21 21
21
Plunger Valve Butt Weld 1⁄2 in. Ferrule JPN ISO® Rc1/4
12. 7
21 45
28.6 21
34 13. 8
35
99
4
In-Line Housing Dimensions
Base Options Vent and Drain Options
Inlet
73 37
42
9.5 52 12.7 9.5
Dome Size X (mm) 21 21 21
7 (Recess base) 44 21 45
X
7 (Tab) 62 21
28.6 34 13.8
0 44 35
99
45
1 2.7
Drain 21
Y
Outlet
½ in. Ferrule
15°
Weight:
Dimensions inches Base + Clamp + Dome
Nominal Dome Size A B C KG LBS
5 in. 17.55 13.31 9.41 3.2 7.0
10 in. 22.55 18.31 14.41 3.8 8.4
20 in. 32.55 28.31 24.41 4.7 10.5
30 in. 42.04 37.80 33.90 6.4 14.1
5
T-Line Ordering Information
Single round housings (European Version)
H 1 E E 7
H 1 U
6
T-Line Ordering Information
Single round housings (Japan Version)
H 1 J
H 1 A V 7 G
I/O (Inlet/Outlet)
norm, type
Ferrule
G = US (Imperial)
7
In-Line Ordering Information
Single Round Housings (US Version)
H 1 U S G
Drain
Cartridge Code Cartridge
Housing Geography* Length I/O Size N = None
7 = Code 7
U = US, Aus, 5 = 5 in. 01 = 1 in. (TC) P = Plunger
Europe 0=C ode 0 Valve
(Code 7, 0 only) 1H = 1.5 in (TC)
(EP, MP Type)
1 = 10 in. D = Diaphragm
Number of Polish Inlet/Outlet Vent
Valve
Cartridges E = Electropolish (EP) 2 = 20 in. (I/O) norm, type N = None
C = TC ½ in.
1 = 1 RD M = Mechanical 3 = 30 in. Ferrule: P = Plunger
Line Ferrule
Polish (MP) G = US (Imperial) Valve
S = In-Line
V = Final Fill D = Diaphragm
(Recess Base, EP) Valve
A = ASME® stamped, EP C = TC ½ in. Ferrule
H 1 E E 7 S
8
In-Line Ordering Information
Single Round Housings (Japan Version)
H 1 J 7 S H
H 1 A V 7 S G 1 H
9
C-Line Ordering Information
Catalogue No. Structure
H 1 U 7 C 1 H C
10
Ordering Information
Recommended Spare Parts
Category Description Catalogue No.
Gaskets (kits) 1/2” TC gasket, Silicone HGTC050SP
1/2” TC gasket, EPDM HGTC050EP
1/2” TC gasket, PTFE encapsulated fluoroelastomer HGTC050T0
3/4” TC gasket, Silicone HGTC075SP
3/4” TC gasket, EPDM HGTC075EP
3/4” TC gasket, PTFE encapsulated fluoroelastomer HGTC075T0
1” TC gasket, Silicone HGTC100SP
1” TC gasket, EPDM HGTC100EP
1” TC gasket, PTFE encapsulated fluoroelastomer HGTC100T0
1 1/2” TC gasket, Silicone HGTC150SP
1 1/2” TC gasket, EPDM HGTC150EP
1 1/2” TC gasket, PTFE encapsulated fluoroelastomer HGTC150T0
2” TC gasket, Silicone HGTC200SP
2” TC gasket, EPDM HGTC200EP
3” TC gasket, Silicone HGTC300SP
3” TC gasket, EPDM HGTC300EP
3” TC gasket, PTFE encapsulated fluoroelastomer HGTC300T0
4” TC gasket, Silicone HGTC400SP
4” TC gasket, EPDM HGTC400EP
4” TC gasket, PTFE encapsulated fluoroelastomer HGTC400T0
1 1/2 inc. Sanitary flange (Quantity: 10) YY2004055
Vent Valve seal kits Seal kit, Silicone o-ring and PTFE tip HGPVS0KIT
Seal kit, EPDM o-ring and PTFE tip HGPVEPKIT
Seal kit, fluoroelastomer o-ring and PTFE tip HGPVV0KIT
Diaphragm for diaphragm valve (Quantity: 2) H1DVDEP02
Diaphragm valve kit (bolts and washers) H1DVBWKIT
11
To Place an Order or Receive
Technical Assistance
In Europe, please call Customer Service:
France: 0825 045 645
Germany: 01805 045 645
Italy: 848 845 645
Spain: 901 516 645 Option 1
Switzerland: 0848 645 645
United Kingdom: 0870 900 4645
For other countries across Europe,
please call: +44 (0) 115 943 0840
Or visit: www.merckmillipore.com/offices
www.merckmillipore.com/offices
Merck Millipore and the M mark are registered trademarks of Merck KGaA, Darmstadt, Germany.
Series 3000 is a trademark of Merck KGaA, Darmstadt, Germany. ASME is a registered trademark of the American Society of Mechanical Engineers.
USP is a registered trademark of the United Pharmacopeia Convention. ISO is a registered trademark of the International Standards Organization.
Lit No. DS4112EN00 Rev. B PS SBU-12-06814-EX 11/2014 Printed in the USA.
© 2014 EMD Millipore Corporation, Billerica, MA USA. All rights reserved.