Activare / reactivare SMB pt.

Win 10

1. Verifica daca sunt instalate protocale .NET Framework si SMB

Control Panel > Programs > Turn Windows features on or off
Bifeaza:
.NET Framework 3.5
.NET Framework 4.7
SMB 1.0/CIFS File Sharing Support (si toate sub-capitolele)
SMB Direct
Restart PC!

2. Pornire automata servicii descoperire in retea

porneste services.exe, apasa "fu"
Function Discovery Provider Host - dublu-click > Startup type: selecteaza Automatic
(Delayed Start)
Function Discovery Resource Publication - dublu-click > Startup type: selecteaza
Automatic (Delayed Start)
Restart PC!

3. Pornire protocale SMB

porneste CMD cu click-dreapta, Run as administrator
copie / ruleaza fiecare linie, pe rand (atentie la scirs, fara alte spatii sau
caractere!!!)
ultimele 2 linii sunt interogari, se raspunde cu [A] la fiecare

sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi

sc.exe config mrxsmb10 start= auto
sc.exe config mrxsmb20 start= auto
reg add HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters /v SMB1 /t
REG_DWORD /d 1 /f
reg add HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters /v SMB2 /t
REG_DWORD /d 1 /f
powershell set-smbserverconfiguration -enablesmb1protocol $true
powershell set-smbserverconfiguration -enablesmb2protocol $true

Restart PC!

4. Setare Win 7/10 pt. scanare fara parola

[RUN] gpedit.msc
Administrative Templates > Network > Lanman Workstation > 2x-click pe Enable
insecure guest logons > bifeaza Enabled
Restart PC!

5. Setare tip retea (de pe public pe private)

Control Panel > Network and Internet > Ntwork and Sharing Centre > HomeGroup >
confirmare activare descoperire in retea, nu este necesar sa creezi un HomeGroup

6. Procedura normala de share to SMB (IP, user, parola, setari retea samd)

https://support.microsoft.com/en-us/help/4034314/smbv1-is-not-installed-windows-10-
and-windows-server-version-1709

https://support.microsoft.com/en-us/help/2696547/how-to-detect-enable-and-disable-
smbv1-smbv2-and-smbv3-in-windows-and

https://support.microsoft.com/en-us/help/2696547/how-to-detect-enable-and-disable-
smbv1-smbv2-and-smbv3-in-windows-and