Professional Documents
Culture Documents
Methods To Determine The Elastic Line: Description Learning Objectives/experiments
Methods To Determine The Elastic Line: Description Learning Objectives/experiments
SE 110.47
Methods to determine the elastic line
• comparison of different methods A device is additionally provided to gen- • elastic lines for statically determinate
to determine the elastic line: vir- erate a bending moment at a random or indeterminate beams under load
tual work, Mohr’s analogy point on the beam. A fourth dial gauge • determination of the elastic line of a
• statically determinate and inde- records the angle of inclination of the beam by
terminate systems device. · the principle of virtual work (calcula-
• various load cases: point load or tion)
bending moment The beam is placed under load by · Mohr’s analogy (area moment meth-
weights (point load and coupled forces od devised by Mohr; graphical rep-
Beams are key structural elements in to generate the bending moment). The resentation)
mechanical engineering and in construc- clamping moment on the supports can • application of the principle of superpos-
tion which are subject to deformation be determined by means of weights. ition
under load. In the case of a simple beam • determination of the
this deformation can be predicted by The various elements of the experiment · maximum deflection of the beam
various methods, such as the principle are clearly laid-out and housed securely · angle of inclination of the beam
of virtual work. in a storage system. The complete ex- • comparison between calculated and
perimental setup is arranged in the measured values for angle of inclina-
The beam under investigation in frame SE 112. tion and deflection
SE 110.47 can be supported by differ-
ent bearing methods. Two supports with
clamp fixings and an articulated sup-
ports with a force gauge are provided to
realise statically determinate or inde-
terminate systems. The two supports
with clamp fixings are provided with dial
gauges and can also be used as articu-
lated supports. These dial gauges en-
able the angle of inclination of the beam
to be determined at the support. A third
dial gauge records the deflection of the
beam at a random point.
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 1/3 - 03.2020
gunt
SE 110.47
Methods to determine the elastic line
Specification
Technical data
Beam
• length: 1000mm
• cross-section: 20x4mm
• material: steel
Weights
• 7x 1N (hanger)
• 28x 1N
• 21x 5N
Measuring ranges
• force: ±50N, graduation: 1N
• travel: 0…20mm, graduation: 0,01mm
Bending moment characteristic (green/yellow) and elastic line (red) for statically determin-
ate beams: 1 single-span beam with mid point load, 2 cantilever beam with point load, LxWxH: 1170x480x178mm (storage system)
3 single-span beam with bending moment as load; Weight: approx. 42kg (total)
MA bending moment on support A, MF bending moment resulting from force F, M bending
moment, α, β angle of inclination
Scope of delivery
3 beams
2 supports with clamp fixings
1 support with force gauge
1 device to generate the bending moment
1 set of weights
3 deflection rollers with fixture
3 cables
2 dial gauges with bracket
1 storage system with foam inlay
1 set of instructional material
Bending moment characteristic (green/yellow) and elastic line (red) for statically indeterm-
inate beams with centralised point load
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 2/3 - 03.2020
gunt
SE 110.47
Methods to determine the elastic line
Required accessories
Optional accessories
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 3/3 - 03.2020
Powered by TCPDF (www.tcpdf.org)