Professional Documents
Culture Documents
SE 110.21 Forces in Various Single Plane Trusses Gunt 1281 PDF 1 en GB
SE 110.21 Forces in Various Single Plane Trusses Gunt 1281 PDF 1 en GB
SE 110.21
Forces in various single plane trusses
x
The illustration shows SE 110.21 in the frame SE 112.
• measurement of the bar forces in Consequently, our trusses can be con- • measurement of the bar forces in vari-
a single plane truss sidered as ideal trusses. A load applica- ous single plane trusses
• construction of various truss tion device attached to a node disk gen- • dependency of the bar forces on the
forms erates an external force. All the forces external force
• bars with strain gauge measure- on the truss bars are recorded by · magnitude
ment to measure bar force means of strain gauge measurement. · direction
Computerised evaluation of the meas- · point of application
As light-weight structures offering a high ured values is provided by measuring • comparison of measuring results with
degree of rigidity, trusses are employed amplifier FL 152 (16 input channels). mathematical methods
in the construction of halls, bridges, The software in FL 152 is used to man- · method of joints
cranes, pylons and masts. Trusses are age the measured data and provide · Ritter’s method of sections
bar structures in which the bars are graphical representation of the bar • basic principle: measurement of forces
subjected to compression or tension forces. The software features a compre- using strain gauge measurement
loading, but not to bending. hensive help function.
The object of the experiment is to meas- All the component elements of the ex-
ure the bar forces in a single plane truss periment are clearly laid-out and housed
subjected to a single external force. The securely in a storage system. The com-
SE 110.21 experimental setup features plete experimental setup is arranged in
bars with special snap-lock closures on the frame SE 112.
their ends allowing them to be fixed eas-
ily into the node disk. The range of differ-
ent bar lengths provided permits three
statically determinated truss to be con-
structed.
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 1/3 - 04.2018
gunt
SE 110.21
Forces in various single plane trusses
Specification
Technical data
1 support, 2 load application device with force gauge, 3 node disk, 4 bar with measuring
point, 5 frame SE 112 Bars: 19
• 2 bars 150mm
• 5 bars 259mm
• 7 bars 300mm
• 1 bar 397mm
• 3 bars 424mm
• 1 bar 520mm
• angle between bars: 30°, 45°, 60°, 90°
• maximum bar force: 500N
• measuring points on each bar
• height of truss max. 450mm
• length of truss max. 900mm
Scope of delivery
1 set of bars
5 node disks
2 supports with node disk
1 load application device
1 set of cables
1 storage system with foam inlay
1 set of instructional material
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 2/3 - 04.2018
gunt
SE 110.21
Forces in various single plane trusses
Required accessories
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 3/3 - 04.2018
Powered by TCPDF (www.tcpdf.org)