Professional Documents
Culture Documents
Confined Space Grinding Work Instruction - Translated
Confined Space Grinding Work Instruction - Translated
Determine the area that needs material Do not perform work in confined
1 removed (Die Shoe or scrap chute)
areas of die shoe!!!!
PPE for Prescription Safety Glasses PPE for Grinding Safety Glasses
If material needs to be removed from the
scrap chute - remove the chute from the
die and proceed with material removal. Ensure proper Grinding PPE (Eye
2 Protection)is worn when operating disc Impact Rated to
grinders. ANSI Z87.1-2010
If material needs to be removed from the with foam seal
die shoe Proceed to step 3.
Impact Rated to ANSI Z87.1-2010
Discuss area to have material removed
with machining group and determine if Machining is the safest and most effective
material can be removed by machining. way to remove material.
Proceed to Step 4 if machining is possible.
3
If material can not be removed by
machining proceed to Step 5.
Develop plan of action with Team Lead,
Shift Supervisor and Machining group for
4 proper method and timing for material
removal.
Rev# Date Details Rev by Cked by Rev# Date Details Rev by Cked by
スクラップの除去が必要な
スクラップが落ちてくる場所で作業
1 場所を認識する (スクラップ経路及びスク
ラップシュート) を行わないこと!
スクラップシュートからスクラップを除去 PPE for Prescription Safety Glasses PPE for Grinding Safety Glasses
することが必要な場合、シュートを金型か
ら外して取り外しを行うこと。 グラインダー使用時に適切なPPEを必ず着 Impact Rated to
2
用すること(保護メガネ) ANSI Z87.1-2010
with foam seal
金型からスクラップの取り外しが必要な場
合、ステップ3を参照する。 Impact Rated to ANSI Z87.1-2010
機械加工グループと機械加工 (削り) で ま
ずスクラップが除去できるかを議論する。
削りが可能な場合はステップ4を参照する
機械加工はスクラップの除去において最も
3 。
安全で効率的な作業です。
削りでスクラップが除去できない場合はス
テップ5へ。
チームリーダー、スーパーバイザー、機械
4 加工グループとで相談し、スクラップ除去
の適切な方法とタイミングを計る。
必要であればスクラップの除去にはリーチ 鉄粉等が舞う恐れがあるので、そのような
の長いグラインダーを用意すること。スタ 場所には頭を突っ込んで作業しないこと。
5
ンダードな通常角度のグラインダーは使用 研磨の方向が自分に向かわないよう+顔に
しないこと。 近づかないように要確認する。
スクラップの除去が完了したら、PPEを外
研磨後の鉄粉等が目に入ることを防ぐ為、
す際にも注意すること。PPEにまだ研磨後
6 PPEを完全に脱ぎ終わらないうちに目の周
の鉄粉等が残っており、眼球に影響を与え
りを触らないこと。
る可能性がある。
Rev# Date Details Rev by Cked by Rev# Date Details Rev by Cked by