Professional Documents
Culture Documents
Standardized Work: Task # Work Element Description Key Points Notes/ Diagrams
Standardized Work: Task # Work Element Description Key Points Notes/ Diagrams
Standardized Work
Department: revision
Position: date:
Prepared By:
MFG Proc No 249 Rev Level 000 file:///conversion/tmp/activity_task_scratch/562926802.xlsx date of last revision: 14Feb17
UNCONROLLED IF PRINTED
MFG Proc No 249 Rev Level 000 file:///conversion/tmp/activity_task_scratch/562926802.xlsx date of last revision: 14Feb17
UNCONTROLLED IF PRINTED
Standardized Work
Department: Die Maint revision
Position: All
Hot Stamp/ID Box Wiring date: 5/21/2020
Remember to have
After you have your wires ready
shrink wrap on the
#4 strip the ends and crip your fork
wire before crimping
terminal on the wire.
the fork terminal.
O
+2
4 V
1 2 3 4 5 6 7 8
After checking with
the sensor check box
For checking your work, you should
you should always
#6 check (NPN) sensors or photo
send die back with a
sensors using the check box.
(CPN) and a follow
up.
MFG Proc No 249 Rev Level 000 file:///conversion/tmp/activity_task_scratch/562926802.xlsx date of last revision: 14Feb17
UNCONTROLLED IF PRINTED
Standardized Work
Department: revision
Position: date:
Prepared By:
MFG Proc No 249 Rev Level 000 file:///conversion/tmp/activity_task_scratch/562926802.xlsx date of last revision: 14Feb17
UNCONTROLLED IF PRINTED
Standardized Work
Department: Die Maint revision
date: 7-May-19
Position: All
Task # Work Element Description Key Points Notes/ Diagrams
Prepared By:
Checked By: Measurement/
WIP Setting Quality Check Safety
MFG Proc No 249 Rev Level 000 file:///conversion/tmp/activity_task_scratch/562926802.xlsx date of last revision: 14Feb17
UNCONTROLLED IF PRINTED
Measurement/
WIP Setting
Approved By: # details revision date Name
MFG Proc No 249 Rev Level 000 file:///conversion/tmp/activity_task_scratch/562926802.xlsx date of last revision: 14Feb17