Professional Documents
Culture Documents
Selection Guide: Buck Switching Regulator Ics Liner Regulator (Ldo) Ics Diode For Peripheral Circuit
Selection Guide: Buck Switching Regulator Ics Liner Regulator (Ldo) Ics Diode For Peripheral Circuit
, LTD
Selection Guide
Buck Switching Regulator ICs
Liner Regulator (LDO) ICs
Diode for Peripheral Circuit
All the contents in this document are as of date of publication. Make sure
that this is the latest revision of the document before use. Please check
the details of the product by data sheet.
https://www.sanken-ele.co.jp/en
→ p. 5
→ p. 6
Linear Regulator
→ p. 7
SGE0002 Oct. 26, 2021 p. 3
Buck Switching Regulator Selection Guide
Single
Surface Mounting Fixed Output Voltage Non-synchronous SI-80xxW/JD/SD
Output
Synchronous NR263S
Adjustable Output
NR264S
Voltage ~18V, 1A → p. 29
SI-8205NHx
~24V, 3A → p. 30-31
NR421A
~14V, 3A → p. 32
Sanken’s buck switching regulators have high efficiency products in light load. The products has Light-load High
Efficiency Function and achieves high efficiency of 85% max. (without this function, η = 40% to 50%)
NR119E ~24V, 2A
η=68%, Io=20mA → p. 20
NR131x ~14V, 3A
η=85%, Io=10mA → p. 21
NR111E ~24V, 4A
η=68%, Io=20mA → p. 24
NR110K
* Light-load High Efficiency Function, ~24V, 4A
η=70%, Io=30mA → p. 25
such as the pulse skip mode and the
burst mode, reduce the circuit
dissipation in light load condition by NR264S ~28V, 1A
Synchronous
η=86%, Io=10mA → p. 29
decreasing number of switching per
unit time. NR263S 5V, 1A
Fixed Output Voltage Synchronous
η=86%, Io=10mA → p. 28
Surface Mounting
Adjustable Output Voltage SI-3012LU
Type ~15V, 0.25A → p. 34
≤3W SI-3012KM → p. 35
~5V, 1A
SI-301xKD
~16V, 1A → p. 36
NR301E, NR302A
~16V, 1A → p. 37
SI-3011ZD
~5V, 3A → p. 38
SI-3033/90KM,
Fixed Output Voltage SI-3120KM → p. 35
2.5V~12V, 1A
SI-3033KD
3.3V, 1A → p. 36
50
SI-8000TM
Input voltage of Absolute maximum ratings, VIN (V)
SI-8000TMX SI-8205NHD/NHG
45 SI-8000JD
SI-8000SD SI-8000HD
40
NR263S
SI-8000W NR264S
35 ◆ ◆
NR117K NR119E NR111E
NR111D
30 NR110K
NR301E SI-3000KM
NR302A SI-3000KD
25
NR420A
20
NR132A/S
SI-3000LU SI-3000KM
15
SI-3000KD
10
SI-3011ZD
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5
Output Current, Io ( A)
Frequency
VIN (V) VO (V) High COUT
(kHz) Phase
Io Products Efficiency in Ceramic Package Page
Adjust Compensation
Min. Max. Fixed Adjustable Fixed Light Load Capacitor
able
Frequency
VIN (V) VO (V) High COUT
(kHz) Phase
Io Products Efficiency in Ceramic Package Page
Adjust Compensation
Min. Max. Fixed Adjustable Fixed Light Load Capacitor
able
Frequency
VIN(V) VO(V) High COUT
(kHz) Phase
Io Products Efficiency in Ceramic Package Page
Adjust Compensation
Min. Max. Fixed Adjustable Fixed Light Load Capacitor
able
L
IC
VIN VO
HSW
CONT
CIN D CO
GND GND
(1) (5)
Vo+3 or Auto
SI-8008TM 1.5 A - 300 kHz 0.8 V 0.8 to 24 V 81% Drooping
4.5 to 40 V -restart
(1) (5)
Vo+3 or Auto
SI-8008TMX 1.5 A - 300 kHz 0.8 V 0.8 to 24 V 81% Drooping
4.5 to 40 V -restart
(1) (5)
(1) (5)
VO+3 or Auto
SI-8008HD 5.5 A - 150 kHz 0.8 V 0.8 to 24 V 83% Drooping
4.5 to 40 V -restart
(1) (5)
L
HSW IC
VIN VO
LSW
CONT
CIN CO
GND GND
200 kHz to
0.8 V VO+3 or Auto
SI-8205NHD 3A - 1MHz 0.5 to 24 V 90% Drooping
±1% 8 to 43 V -restart
Adjustable
Auto
NR421A 3A - 350 kHz 0.8 V 0.8 to 14 V 4.5 to 18 V 94% Drooping
-restart
IC
VIN VO
CONT
CIN CO
GND GND
2.4 V Auto
SI-3012LU 0.25 A 0.5 V 1.25 V 1.5 to 15 V 18 V ✔ Fold Back
to Vo+2 V -restart
(5) (4)
(1) ADJ: Feedback Signal Input SI-3012LU
(2) GND:Ground
(3) VC:Vo ON/OFF Control
Load
(4) VIN:Voltage Input
(5) VO:Output
Load
(5) Sense(ADJ):Detection of Output
Voltage/Feedback Signal Input
(1) (5)
Auto
SI-3010KD 1A 0.6 V 1.0 V 1.1 to 16 V 35 V 2.4 to 27 V - Fold Back
-restart
Load
Voltage /Feedback Signal Input
(1) (5)
Auto
SI-3011ZD 3A 0.6 V 1.1 V 1.2 to 5 V 10 V 2.4 to 6 V - Drooping
-restart
Load
Voltage/Feedback Signal Input
(1) (5)
Freewheel Diode
L
IC
VIN VO
HSW
CONT
CIN D COUT
GND GND
Products VRM IF VF
All data, illustrations, graphs, tables and any other information included in this document (the Sanken assumes no responsibility whatsoever for any and all damages and losses that may be
“Information”) as to Sanken’s products listed herein (the “Sanken Products”) are current as of the suffered by you, users or any third party, or any possible infringement of any and all property
date this document is issued. The Information is subject to any change without notice due to rights including intellectual property rights and any other rights of you, users or any third party,
improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales resulting from the Information.
representative that the contents set forth in this document reflect the latest revisions before use. No information in this document can be transcribed or copied or both without Sanken’s prior
The Sanken Products are intended for use as components of general purpose electronic written consent.
equipment or apparatus (such as home appliances, office equipment, telecommunication Regarding the Information, no license, express, implied or otherwise, is granted hereby under
equipment, measuring equipment, etc.). Prior to use of the Sanken Products, please put your any intellectual property rights and any other rights of Sanken.
signature, or affix your name and seal, on the specification documents of the Sanken Products Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any
and return them to Sanken. When considering use of the Sanken Products for any applications kind, whether express or implied, including, without limitation, any warranty (i) as to the quality
that require higher reliability (such as transportation equipment and its control systems, traffic or performance of the Sanken Products (such as implied warranty of merchantability, and
signal control systems or equipment, disaster/crime alarm systems, various safety devices, etc.), implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken
you must contact a Sanken sales representative to discuss the suitability of such use and put your Product is delivered free of claims of third parties by way of infringement or the like, (iii) that
signature, or affix your name and seal, on the specification documents of the Sanken Products may arise from course of performance, course of dealing or usage of trade, and (iv) as to the
and return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not Information (including its accuracy, usefulness, and reliability).
intended for use in any applications that require extremely high reliability such as: aerospace In the event of using the Sanken Products, you must use the same after carefully examining all
equipment; nuclear power control systems; and medical equipment or systems, whose failure or applicable environmental laws and regulations that regulate the inclusion or use or both of any
malfunction may result in death or serious injury to people, i.e., medical devices in Class III or a particular controlled substances, including, but not limited to, the EU RoHS Directive, so as to be
higher class as defined by relevant laws of Japan (collectively, the “Specific Applications”). in strict compliance with such applicable laws and regulations.
Sanken assumes no liability or responsibility whatsoever for any and all damages and losses that You must not use the Sanken Products or the Information for the purpose of any military
may be suffered by you, users or any third party, resulting from the use of the Sanken Products in applications or use, including but not limited to the development of weapons of mass
the Specific Applications or in manner not in compliance with the instructions set forth herein. destruction. In the event of exporting the Sanken Products or the Information, or providing them
In the event of using the Sanken Products by either (i) combining other products or materials or for non-residents, you must comply with all applicable export control laws and regulations in
both therewith or (ii) physically, chemically or otherwise processing or treating or both the same, each country including the U.S. Export Administration Regulations (EAR) and the Foreign
you must duly consider all possible risks that may result from all such uses in advance and Exchange and Foreign Trade Act of Japan, and follow the procedures required by such applicable
proceed therewith at your own responsibility. laws and regulations.
Although Sanken is making efforts to enhance the quality and reliability of its products, it is Sanken assumes no responsibility for any troubles, which may occur during the transportation of
impossible to completely avoid the occurrence of any failure or defect or both in semiconductor the Sanken Products including the falling thereof, out of Sanken’s distribution network.
products at a certain rate. You must take, at your own responsibility, preventative measures Although Sanken has prepared this document with its due care to pursue the accuracy thereof,
including using a sufficient safety design and confirming safety of any equipment or systems Sanken does not warrant that it is error free and Sanken assumes no liability whatsoever for any
in/for which the Sanken Products are used, upon due consideration of a failure occurrence rate and all damages and losses which may be suffered by you resulting from any possible errors or
and derating, etc., in order not to cause any human injury or death, fire accident or social harm omissions in connection with the Information.
which may result from any failure or malfunction of the Sanken Products. Please refer to the Please refer to our official website in relation to general instructions and directions for using the
relevant specification documents and Sanken’s official website in relation to derating. Sanken Products, and refer to the relevant specification documents in relation to particular
No anti-radioactive ray design has been adopted for the Sanken Products. precautions when using the Sanken Products.
The circuit constant, operation examples, circuit examples, pattern layout examples, design All rights and title in and to any specific trademark or tradename belong to Sanken and such
examples, recommended examples, all information and evaluation results based thereon, etc., original right holder(s).
described in this document are presented for the sole purpose of reference of use of the Sanken DSGN-CEZ-16003
Products.