Professional Documents
Culture Documents
Cabletec LC: Atlas Copco
Cabletec LC: Atlas Copco
Cabletec LC: Atlas Copco
Cabletec LC
Technical specification
www.atlascopco.com
LC
Fully mechanized rig for long hole drilling and cable bolting.
Features automatic drilling and cement handling system, which
together with the high capacity steel strand reel gives top perfor-
mance and high quality bolt installations.
Standard features
»»Rock drill »»Cement handling unit
• Atlas Copco COP-series – high performance rock drills • Fully automatic cement handling unit
• On board silo for cement storage
»»Drilling unit • RCS-controlled water/cement ratio
• Cement dust collector
• Accurate and fully adjustable feed control
• Sturdy and reliable carousel, 17 + 1 rods • Semi-automatic cement hose control
• Drill steel support and cutting deflector
• Stinger support during drilling »»Cable bolting head
• Cable and cement hose feeding system
• Cable bending mechanism
»»Control system • Strand cutter
• Rig Control System (RCS) • Cable pusher for installation of twin cables
• Advanced Boom Control (ABC) Regular
• Automatic functions such as one hole automatics »»Carrier
• Optimized regulation of the drilling process
• Sturdy articulated carrier with four-wheel drive
• Logging system
• Powered by a 4-cylinder, EPA III/COM III
(Tier 3/Stage IIIA) approved diesel engine
»»Drilling boom • Cable reel
• Hydraulic heavy-duty boom with proportional movements
Specifications
ROCK DRILL »»Control System
COP 1638 COP 1838ME COP 1838MUX
• Computerized operator panels with colour display
• USB-port for transfer of data
Shank adapter R32/ TC35/T38 R32/ TC35/T38 TC35/T38 • Integrated diagnostic system
Height over drill centre 88 mm 88 mm 122 mm • Rig Control System (RCS)
Length without shank 1 008 mm 1 008 mm 1 206 mm
• Single hole automatics
• Rock drill surveillance system
Impact power 16 kW 18 kW 18 kW
Impact rate 60 Hz 60 Hz 60 Hz
»»Electrical system
Hydraulic pressure 200 bar 230 bar 220 bar
Rotation system Separate rotation Separate rotation Separate rotation • Total installed power....................................................105 kW
Rotation speed 0–340 rpm 0–340 rpm 0–340 rpm • Main motor.....................................................................95 kW
Rotation torque, max 440–1 000Nm 640–1 000 Nm –1 000 Nm
• Voltage/frequency.............................. 400–1 000 V/50–60 Hz
• Starting method...................................... star/delta, 400–690 V
Lub. air consump. at 2 bar 5–7 l/s 5 l/s 5 l/s
• Digital volt/amperage meter in electric cabinet
Water consumption 35–120 l/min 40–120 l/min 55–120 l/min
• Electric cable reel with dual control and limit switch
Weight 170 kg 170 kg 225 kg • Electronic overload protection
• Phase sequence and earth fault indicators
»»Feed
»»Air/Water system
• Feed BMH 200 series including BSH55 drill steel support and
BSC55 cutting deflector • Water booster pump, max capacity at 15 bar............ 250 l/min
• RHS 17 for 1.2, 1.5 or 1.8 m rods • Hydraulic drive, axial piston motor................................. 10 cc
• Atlas Copco screw compressor..................................... GAR 5
• Maximum capacity at 7 bar and 5 400 rpm......................20 l/s
»»Positioning system • Joystick controlled water-jet canon for cleaning
• Feed extension, 4'/ 5', 6' drill steel.................... 900/1 200 mm • Water pressure/flow guard
• Boom extension, BUT 35 BS................................... 1 600 mm • Air/water pressure gauge
• Rotary actuator for 360º ring drilling.......................... BHR 30 • Hole blowing kit
• Positioning system tilt .............................................. +90º/-10º • Rig washing kit
• Boom lift........................................................................... +45º
• Stinger, backward on feed holder.............................BSJ 8-200 »»Carrier
• Stinger, forward on feed........................................... BSJ 8-115
• Deutz TCD 2013 L04 2Vwater-cooled turbo-charged engine
»»Bolting system • Power rating at 2 300 rpm............................. 120 kW (163 hp)
• Swingable seat with safety belt for drilling and tramming
• Articulated steering....................................±38º steering angle
• Grout hose diameter, inner/outer.............................. 20/29 mm
• Hydrostatic transmission....................................... Dana 24000
• Grout hose reel, max hole length..................................... 25 m
• Steel strand cable reel load, max.................................1 700 kg • Front/Rear axle................Dana 114/ Dana 114, ±8º oscillation
• Cable bolt ................................. Standard 15.2 mm/bulb cable • Tires.......................................................................14.00 x R24
• Cable and hose feeder with cable cutter and bending unit • Clearance outside axles....................................................... 13º
• Logging of accumulated cable consumption • Fuel tank, volume..............................................................110 l
• Cable feeding depth measurement • Electric system..................................................................24 V
• Batteries (with charger)...........................................2 x 125 Ah
• Tramming lights....................6x40 W LED, 2x70 W, 24 V DC
»»Cement grouting system • Working lights .....................................4x35 W HID, 24 V DC
• Illuminated stairs for platform (LED)
• Cement mixer, volume......................................................114 l
• Spotlight............................................................2 x 70 W, 24 V
• Cement silo, max load dry cement..............................1 000 kg
• Logging of accumulated cement consumption • Beacon, horn, brake lights and reverse alarm
• Water/cement ratio preprogrammed recipes • Control panel for roof, jacks and cable reel
• Cement hose feeding depth measurement • Communication radio power outlet, 12 V
• Preprogrammed cleaning sequences • Service brakes with two separate circuits
• Form oil kit • Automatic differential lock on front axle
• SAHR, emergency and parking brakes
»»Hydraulic system • Hydrostatic power steering system
• Reversing camera with monitor
• Hydraulic oil tank, volume max/min........................ 250/200 l • FOPS-approved protective roof
• System pressure.................................................... 150–240 bar • Front and rear hydraulic jacks
• Filtration......................................................................... 16 µm • Shelf for drill bits and tools
• Hydraulic oil temperature/level surveillance • Central lubrication system
• Oil leakage shut down system
• Manual lubrication kit
• Electric oil filling pump
• Oil filter indicator • Rig alignment laser
• Water oil cooler • Fire extinguisher
• 4 wheel drive
• Hand throttle
• Catalyzer
Cabletec LC
Specifications
Shank adapters ReCommended Cable Size and Length
Thread Diameter Hole dimension Voltage Type Dimension, mm2 Diameter, Length,
mm m
mm R32 38 48–76
400V H07RN-F 4G70 55 90
TC35 38 51–76
400V Buflex 3x95 + 3G25 46 135
T38/T38* 38/59.5 64–89
440–500V H07RN-F 4G70 49 110
*Extractor
440–500V Buflex 3x95 + 3G16 42 155
Feeds
Recommended drift size
Feed type Length Min. width Min. height Efficient height Max. height
Optional equipment
»»Rock drill • Boom Alignment Laser • Hot climate tramming kit
• Radio Text Message System
• Extractor unit COP 1838MUX
• Automatic Parallel Holding »»Electrical system
• Lubrication surveillance kit
• Void Detection
• Thread lubrication kit • Soft start for electrical motors
• Remote Cradle Control
• Remote Feed Control • Electric cable
»»Boom • Electric plugs, socket and switch gear
• Automatic boom lubrication kit • Electric outlet for accessories
• Central boom lubrication kit »»Cabin • Extra transformer 15 kVA
• Automatic lubrication kit, drilling • FOPS-approved cabin, noise level < 80 • CSA/Australian approved electrics
unit/boom dB(A), including:
• Stinger extensions -- Air conditioning unit
-- Front window 16 mm
»»Miscellaneous
-- Media player • Hose/cable guide at water/cable reel
»»Air/Water System -- Boot washing kit • Electronic part book on CD-CAT B
• Water hose reel with dual control • Alternative mounting height • Remote operating kit
• Water hose (-200/+250 mm) • Ni-Cr plated piston rods
• Area guards
• Cabin body made of stainless steel
»»Hydraulic system • Front window, 24 mm
• Heater kit for hydraulic oil tank, • Protection bars, front window
diesel engine and electric motors • Cabin lift and tilt system
• Low-designed cabin, for seated operator
»»Software cabin height 2 953 mm
Dimensions
3586 1426 3640
2203
2450
www.atlascopco.com
brochure may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
© Copyright 2010, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos in this
LC
643
840
10° 19°
3360 2140
Reel in outer
8 position
1730
6
4100
4
4100
400
2
500
Ø200 Ø300
225
0
3931 1328 Rear
1125 Min 1520 Max
2
8 6 4 2 0 2 4 6 8m
Dimensions Weight
mm Width, transport 2 750 gross weight
Rig height with canopy 3 133
kg Total 30 000
Rig height with cabin 3 093
Boom side 18 000
Length 14 333
Engine side 12 000
Ground clearance 265
noise and vibration
turning radius Operator sound pressure level in canopy, drilling, 106+-6 dB(A) re 20uPa
depending on surface free field (ISO 11201)
Operator sound pressure level in cabin, drilling, 75+- 3 dB(A) re 20uPa
mm Outer 7 400
free field (ISO 11201)
Inner 4 500 Operator sound pressure level working close to 106+-6 dB(A) re 20uPa
machine, drilling, free field
TRAMMING SPEED
05/2010
Sound power level (ISO 3744), drilling, free field 126 dB(A) re 1pW
km/h On flat ground (rolling resistance 0.05) >15
Vibration levels seated, drilling (ISO 2631-1) canopy 0.1+- 0.15 m/s^2
On incline 1:8 >5
Vibration levels seated, drilling (ISO 2631-1) cabin 0.07+- 0.07 m/s^2
canopy
Vibration levels standing, drilling (ISO 2631-1) cabin 0.1+- 0.15 m/s^2