Professional Documents
Culture Documents
SA 46-20 - Stall Warning Heat Control Modification On Replacement Wings 2019-03-27 NA by SN
SA 46-20 - Stall Warning Heat Control Modification On Replacement Wings 2019-03-27 NA by SN
COMPLIANCE TIME: To coincide with next regularly scheduled maintenance event, but not to exceed
the next 100 hours time in service
APPROVAL: The engineering aspects of this service document have been shown to comply
with the applicable Federal Aviation Regulations and are FAA approved.
PURPOSE: Installation of Stall Warning Heat Control Modification Kit, Piper Part Number
(P/N) 88452-002, is required by AD 2008-26-11. See Piper SB 1192 dated
September 15, 2008.
INSTRUCTIONS:
1. If not already accomplished, order and install one (1) Stall Warning Heat Control Modification Kit,
P/N 88452-002, per affected wing.
2. Make a logbook entry indicating compliance with this special advisory.
ATA/JASC: 3418
(OVER)
SPECIAL ADVISORY NO. 46-20 PAGE 2 of 2
MATERIAL REQUIRED: One (1) each, Stall Warning Heat Control Modification Kit, P/N 88452-002,
per wing
SUMMARY: Please contact your Piper Approved Service Center to make arrangements for
compliance with this special advisory in accordance with the compliance time
indicated.
NOTE: Please notify the factory of any address/ownership corrections. Changes should include aircraft model,
serial number, and current owner’s name and address.