Professional Documents
Culture Documents
POS80 User Manual Aku
POS80 User Manual Aku
Cover of cutter Cover of paper warehouse Insert the matched data connection
Paper cover's opening button Bottom of printer cables to the interfaces(USB/Parallel/Serial)
Paper feeling button Cover of DIP switch of the printer, the other ends to the PC.
Indicators(Power/Error/Paper) Power & Communication ports Connect the power adapter.
Cash
Cash drawer
USB
PC
Be careful of
the saw blade
Pull a part of paper out and close the storehouse cover. Serial
PC
Parallel
After paper loading, tear off the extra paper from the edge of
the cutter.
Ethernet
Wifi/Bluetooth
Switch router
5. The installation of the driver 7. The setting of the IP address
The printer's Ethernet IP address can be set directly via the web in the setting
page of the printer
Insert the CD
into your Connect printer and PC in the same Ethernet LAN.
Turn on the computer's
printer power CD-ROM Please visit address 'http://192.168.1.87' (e.g.: the'192.168.1.87', is
switch drive
printer IP address set from factory), then press 'Enter' key, IP address
setting page in browser will be as below:
Find Windows driver procedure in the CD, The route is: Driver\80
Driver\FK80 Setup. Right click 'FK80 Setup' ,choose 'run as
administrator' .( For XP system, double click to run directly. For
WIN7/WIN8/WIN10, it needs administrator to run the driver).
Open
Run as administrator
3 Click 'Configure Interface' link in the left side, then enter the modified
target IP and click 'save' button to save setting. Click 'Reboot' button
Choose language as ' 英语 (English)' click 'Next',and select the
to reset printer if you want the setting to take effect.
interface (Cable network/USB/Serial/Parallel) to PC, then click
'Next'. If you want to know the printer's current settings and parameters, repeat
FK80 Printer Driver Install
4
FK80 Printer Driver Install step 2 but input new IP address, then click 'Enter' -'Printer Status'-'Print
FK80 Printer Driver Install
Test Page' to check if the IP address is set successfully or not.
Cable network-use cable connect
Cable network-use cable the printer
connect toprinter
the your network
to your network
DIP switch
Switch Function On Off Default
Cutter
Buzzer
Forbidden
Enable
Enable
Forbidden
Off
On
9. The content in the package
Printing density Dark Light Off
Multi-byte encoding Single-byte multi-byte
Off
encoding encoding
Max. number of Printing
characters in each line 42 48 Off