Professional Documents
Culture Documents
Ffa08 - g07 - en (Locking Systems)
Ffa08 - g07 - en (Locking Systems)
Ffa08 - g07 - en (Locking Systems)
Group 7
hettlock SV hettlock RC
7.1.1 - 7.1.7, 7.1.10 - 7.1.25 7.1.8 - 7.1.9, 7.1.10 - 7.1.25
RFID chip and locking unit auch mit 22 oder 26 mm langen Zylindergehäuse für stärkere Türen lieferbar.
powered by SimonsVoss
öffne
n · op
en · o
uvrie
r·
hettlock SV
Transponder
• Active wireless transponder
• Drives the nearest control unit for the hettlock furniture locking system
as well as for lock and organisation system 3060 from SimonVoss
Technologies AG at the press of a button
• Diameter = 42 mm, Height = 13 mm
• Plastic housing, black with red or blue button
• State on delivery: unprogrammed, for programming by the owner
• See page 7.1.7 accessories for programming
hettlock SV 95
Control unit ø 3,3 40 20
Order no. PU
0 041 221 1 set
Connecting leads
controller – mechanism
• For connecting a controller with
one or two locking mechanisms
Order no. PU
0 041 238 1
Programming transponder
• For programming smaller locking systems with up to
99 transponders and 99 locks in buildings and furniture
without personal computer, laptop and additional
software.
• Complete with password card
• The password allows the "transponder locking plan" to
be transferred to the PC / laptop and ensures that the
locking system can be expanded
Order no. PU
0 041 236 1
Technical brief
• For furniture management
• Programming without additional equipment
Radio approvals, as at January 2008:
• Radio technology, frequency 868.3 MHz EU/EUFTA territory: Austria, Belorussia, Bosnia/Herzegovina, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
• Reach: up to 130 metres in open space Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Sweden, Switzerland, Slovakia, Slovenia,
Spain, Turkey, UK.
hettlock RC
Transponders
• Active wireless transponder
• Drives all reachable control units for the hettlock RC furniture locking
system at the press of a button
• Length 59 mm, Width 25 mm, Height 12 mm
• Metal housing, nickel-plated
• State on delivery: unprogrammed, for programming by the owner
Order no. PU
9 078 853 1
hettlock RC
Control unit
• Installation in furniture
• Motor-driven lock
• Self-locking
• For up to 10 hand-held transmitters per control unit
• Optional cable management
• Optionally available with function indicator
• Powered by batteries, the control unit requires no
!
complicated wiring and provides independence from a
mains power source 95
• Plastic housing, black ø 3,3 40 20
7
One set contains:
1 controller
2 AA batteries, 1,5 V 50 64
fixing accessories
Order no. PU
9 078 847 1 set
20
Connecting leads
controller – mechanism
• For connecting a controller with one or two
locking mechanisms
17,5 20
20
Lift
Hub88mm
mm
Mounting example
44,5 26 14,5
21
32
20 20
12,5 12,5
Possible positions
ø 3,1
Order no. PU 23 27,5 32
13 20
0 041 223 1 set 3,2
26 44,5
3
32 40 5
17,5 20
3,6
Assembly
Mounting application
44,5 44,5
75 75
26 26
±0,5 ±0,5
5,5 5,5
6,5 6,5
8,5 8,5
Mounting application
± 0,5
5,5
± 0,5
5,5
20
70
Possible positions
Drawer
Order no. PU
0 041 232 1 set
Espagnolette lock Pin locking mechanism Stop pin with plastic roller
75 40 15
21 31 9,1 32 3
4,5
5 4
4,5 ø 3,1
21 ø 3,3 21 6,7
32 24
23 32 ø7
3,3
17,5 30 M3
12,5 26 44,5
! 17,5
Lift
Hub88mm
mm
20
26 26
16 26 26 16
030 031
ø 3,5 ø 3,5
14 11,5 11,5 14
Espagnolette rod 6 /5
• Nickel-plated steel
6
Positioning
Mounting application
22,5
16 18,5
Top rod
length A
175 = A - 13 mm
140
9 11,5 H = internal
11,5 11 height
41 21 19,2
71
115 Bottom rod
length B
= B - 13 mm
35
22,5
16 18,5
6,5 Attention:
Observe rod length
27,5 The rod saddle on the closing hooks is tapered on the
inside and only provides optimum hold and precision
locking if exact dimensions are observed.
32
Order no. PU
0 041 233 1 set
ø 3,8
Sliding door lock Pin locking mechanism
75
31 9,1
4,5
25 ø 10 ø 18
4,5 ø 3,1
21
23 32
23
M3
12,5 26 44,5
ø 35
15 17,5 20
Lift
Hub88mm
mm
Mounting application
Positioned Positioned
at the top on middle panel
Assembly pin
deflector
44,5 44,5
44,5 32
ø 35
ø 12
ø 35
ø 12
±0,5
19 40
40 ±0,5
ø 12 ø 12
• For locking desk pedestals with Stop Control Plus central lock
on one side, installation width 392 mm
• For hole line 32 mm
• Can be used with hettlock control unit,
see page 7.1.5 or 7.1.9
• The following Systema Top 2000 and Stop Control Plus
components are dependent on each other and are therefore
essential for the hettlock lock system to function.
- OrgEvolution pencil tray, see pages 7.1.20
- Stop Control Plus lock connector for hettlock in the desk
pedestal, see below
• All other components for desk pedestals can be freely selected
from the Systema Top 2000 and Stop Control Plus ranges,
see Group 6
• Nickel-plated/black
320
192
96 ø8
Order no. PU
0 041 216 1 set
Order no. PU
0 041 214 1
Positioning
Assembly
of front panel connector and controller
375
Assembly Disassembly
Order no. PU
0 074 862 1 set with without
Silent System Silent System
EB = 392 +1
Assembly Disassembly
Cross partition
• For OrgEvolution pencil tray
• Transparent plastic
323
Order no. PU
0 041 316 1
Divider
• For OrgEvolution pencil tray
• Transparent plastic
75
Order no. PU
0 041 319 1
Insert trays
• For OrgEvolution pencil tray 25
• Transparent plastic 79
• Can also be used in Org@Tower and Org@Wall 79
198
25
Length x Width Order no. PU 79
mm
79
118 x 79 0 041 317 1
198 x 79 0 041 318 1
118
Partitioning possibilities
Pencil tray
DIN A8 DIN A8
DIN A4
DIN A5 CD CD
DIN A4
DIN A6 DIN A7
DIN A8
DIN A7
Order no. PU
0 041 218 1 set
Mounting application
32
19
min. 64
1 HE
25 25
32 32
Positioning
Assembly
25
32
25
32 25
32
25 25 25
32 32 32
25
32
25
32
25 25
32 32
18,5
15
ø 14 ø 15,5
Order no. PU
0 041 215 1
Connecting lead,
controller – optical feedback unit
• For connecting a controller to the
optical feedback unit
Mounting application
19
19
Cable trunking
• For routing the connecting leads
- Controller – mechanism
- Controller – optical feedback unit
• 1000 mm, to cut to length as required, self-adhesive,
light grey
16
Order no. PU
0 041 591 1 10
Order no. PU
0 041 592 1 set
175,5
28,5 18
26
12°
hettlock RC
Transponders
• Active wireless transponder
• Controls the control units for the
hettlock RC furniture lock system at the press of a button
• Length 59 mm, width 25 mm, height 12 mm
• Metal housing, nickel-plated
• State on delivery: unprogrammed, for programming by the owner
Order no. PU
9 078 853 1
Cylinder bore
23
55
151
14
Assembly
Lock with square hub Cylinder lock
16 -21
Centring
hettlock RC max.
max. 2 2mm
mm
Prestige 2000
Assembly
Opening position
Right-hand Left-hand
control unit control unit
Screw mounting Insert batteries Close housing. That's all there is to it!
AAA
AAA
hettlock RFID
Electronic slam lock
• Reader and control unit with integrated locking mechanism
• Can be used on side-hung furniture doors
• Can be used as opening mechanism in combination
with P2O hinges
• Locking authorisations for up to 50 transponders
per control unit
• RFID chip technology
• Straightforward programming by programming card
12
Order no. PU
30 29
9 078 836 1 set
64
hettlock RFID
Replacement transponder
• Passive transponder with RFID system
• Identifies itself in the reach of a control unit
• Plastic housing, black/light grey
• State on delivery: unprogrammed, for programming by the owner
Order no. PU
9 078 844 1/5
Lock and locking component mounted on inset door Lock and locking component mounted on overlay door
45 45
Door thickness
61 +7 61
7
52 + Reveal 52 + overlay
System idea For sophisticated security Setting the standards Safety at home
demands and convenient in quality, logistics and
locking. lock versatility
Locking technology Pin cylinder Z19, ø 18 mm Exchangeable disk tumbler barrels Snapped key
Z23, ø 18 mm
or Z25, ø16,5 mm
Lock system Lock system 10000/25000 Lock system 18000 Single key operation
• 50 keys operations available • 50 keys operations available ex • Every key locks and unlocks
ex stock stock, systematic selection every lock
• up to 3000 keyed-to-differ • Lock plan with up to 1000 key
combinations on request operations
• Lock plan with up to 960 key • For general master key and
operations master keys (2 groups)
• Equipped for master key
operation
Main applications Ideal for large premises and Versatile locking solutions for all Protect residential and
properties with high security standard as well as countless office furniture against direct
demands. customized options in access
furniture-making for offices,
hotels, hospitals and the home
environment ...
Key versions
Snapped key Cylinder key
• Most simple keys • Sophisticated key
• Always keyed alike • Keyed alike or keyed-to-differ
• Basic level of security • Medium or very high locking security, depending
• More attractive shape and finish than cylinder keys on production effort
• Protect residential furniture against direct access • Various lock operations allow for lock plans
• For commercial applications with a variety of locking options
Cylinder configuration
Pin cylinder Disk tumbler barrels
• Several pins scan position and depth • 6 plates
of the key milling • Scanning depth and position of milling
• High variety of milling and lock • Adequate for many applications
operations
• Millings are more difficult to copy,
therefore much lock operations are
much saver
• Keys glide easily into the barrel
Locking modes
Keyed alike: Keyed-to-differ:
all locks can be locked and unlocked with one key all locks can be locked and unlocked with different keys
Locking directions
• Locking directions are standardized to take care that Locks require 90°, 180° or 360° turning of the key to lock/
identical doors open and close in the same direction unlock.
However, the key slot should always be
in an upright position when locked.
180∞ 360∞
90∞
Locking Locking Turn
direction 90° direction 180° knob 360°
Benefit:
• Intuitive knowledge of the locking direction
Applications right Applications left Applications drawer
R
L
m
4m
ø2
Cylinder espagnolette lock Espagnolette lock for square rods Cylinder door lock
7.2.6 - 7.2.7 7.2.8 - 7.2.9 7.2.13
Cylinder push lock Cylinder cam lock Cylinder lock for roller shutters
7.2.14 7.2.14 7.2.15
Backset 15 mm Backset 25 mm
Locking modes Order no. PU Locking modes Order no. PU
right left right left
keyed to differ keyed to differ
10101-10150 0 072 693 0 072 694 1/10 10101-10150 0 072 705 0 072 706 1/10
according to master key lock plan 0 072 697 0 072 698 1 according to master key lock plan 0 072 709 0 072 710 1
15 8 D25
25 8
10 10
4 22 7,5 4 22 7,5
32 32
32
18 55 ø18 ø19 ø18 ø18,8 ø18 18 55 26 ø18 ø19 ø18 ø18,8 ø18
32 32
32
8,5 5 5
6,5 6,5
8,5
28 14,5 28 14,5
3928
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Exquisit locks and rosettes
Exquisit locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
Mounting application
4,5
21
Top
rod length =
A - 26 mm
32
H= 55
internal
height
32
B
Bottom
rod length =
B - 26 mm
21
4,5
19 - 20
Logistical advantage:
1 lock housing for 2 locking directions
= half the stock-keeping for retailers/tradespeople
The integrated slide mechanism converts the
right-hand lock (delivered as standard) into a
left-hand lock and vice versa ....
4,5
21 R R
L L
Top
rod length =
A - 26 mm
A
32
H=
internal 55 R
R
height L L
32
B Bottom
rod length =
B - 26 mm
21 R
L L
4,5 R
19 - 20
L
R
R
0∞
L
18
L
R
R
Note: L
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø33
Turn knob
Type 472
• Complete with securing sleeve
• Suitable for panel thicknesses
from 18 - 21 mm
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø33
Order no. PU
0 072 536 1
Fixed knob
Type 474
• Complete with screw,
washer, spacer
• Nickel-plated matt
5 29
30
M5
ø10 ø5 ø30 ø5,2 ø24 ø28 ø33
Order no. PU
0 072 538 1 1,5 1
Tungsten carbide drill bit dia. 24 mm for securing sleeve/washer Order no. PU
• Shaft 10 mm, cylindrical 0 046 075 1
• For upright and hand drills only
Turn knob
Type 412
• Complete with securing sleeve
• Suitable for panel thicknesses
from 18 - 21 mm
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø38
Order no. PU
0 072 171 1/10
Fixed knob
Type 414
• Complete with screw,
washer, spacer
• Nickel-plated matt
5 29
30
M5
ø10 ø5 ø30 ø5,2 ø24 ø28 ø38
Order no. PU
0 072 250 1/10 1,5 1
Tungsten carbide drill bit dia. 24 mm for securing sleeve/washer Order no. PU
• Shaft 10 mm, cylindrical 0 046 075 1
• For upright and hand drills only
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø31
Turn knob
Type 452
• Complete with securing sleeve
and 2 double-profile flat keys
• Suitable for panel thicknesses
from 18 - 21 mm
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø31
Order no. PU
0 072 179 1/10
Fixed knob
Type 454
• Complete with screw,
washer, spacer
• Nickel-plated matt
5 29
30
M5
ø10 ø5 ø30 ø5,2 ø24 ø28 ø31
Order no. PU
0 072 229 1/10 1,5 1
Tungsten carbide drill bit for runner and guide securing sleeve/Washer Order no. PU
• Shaft 10 mm, cylindrical 0 046 075 1
• For upright and hand drills only
Backset 15 mm Backset 25 mm
Locking modes Order no. PU Locking modes Order no. PU
right left right left
keyed to differ keyed to differ
10101-10150 0 072 748 0 072 749 1/10 10101-10150 0 072 760 0 072 761 1/10
according to master key lock plan 0 072 752 0 072 753 1 according to master key lock plan 0 072 764 0 072 765 1
15 25
12,5 12,5
2,5 22 7,5 2,5 22 7,5
32 32
23 50 ø18 ø19 ø18 ø18,8 ø18 23 50 ø18 ø19 ø18 ø18,8 ø18
32 5 32 5
9 6,5 9 6,5
29 10 39 10
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Exquisit locks and rosettes
Exquisit locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
21 1,5 24
12 7,5
Locking modes Order no. PU Lift
right
42 32 ø9 ø18 ø21 ø21,7 ø22,3 ø18
keyed to differ
10101-10150 0 072 772 1/10 3,5
6,5
according to master key lock plan 0 072 774 1
13
2 16
Locking modes Order no. PU
7,5
right 23,5
keyed to differ ø18 ø19 ø18 ø18,8 ø18
10101-10150 0 072 775 1/10
32 22
according to master key lock plan 0 072 777 1 42 6,5
Tungsten carbide drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Exquisit locks, rosettes
and cylinder push lock Exquisit locks 18 0 046 087 1
• For upright and hand drills only Rosettes 19 0 046 078 1
Cylinder push lock 22,3 0 046 076 1
33,5
D15 2,5 13 22
8
7,5
Locking modes Order no. PU 21
right left 52 18 35 ø18 ø18,8 ø18
keyed to differ 21
10101-10150 0 072 778 0 072 779 1/10 6,5
Lock catch
for cylinder lock for roller shutters
13
• Recessed installation
6
• Spring-mounted for key operation or,
when bolts are extended, for catch ø35
8 4,5
operation
• Nickel-plated ø35
21
35
52
21
15
Order no. PU 10
28 6
0 072 507 1/10
Striker
for cylinder lock for roller shutters 13
• Recessed installation
2 11 5
• Spring-mounted for key operation or, 14 ø3
when bolts are extended, for catch 16 11
operation 2 9
• Nickel-plated
27,5
45 15
66 27,3 22,3
45
27,5 66
Order no. PU 9
0 072 508 1/10 5,1
Tungsten carbide drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Exquisit locks, rosettes,
roller shutter lock and lock catch Exquisit locks 18 0 046 087 1
• For upright and hand drills only Rosettes 19 0 046 078 1
Roller shutter lock and
lock catch 35 0 046 071 1
_______________________________
Project: _______________________________
_______________________________
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
10 _ _ _ 25 _ _ _
Sliding-door cylinder
lock for 3-door Cylinder lock Cylinder catch lock Cylinder Cylinder lock
sliding-door cabinets for roller shutter for roller shutters cam lock for glass doors
7.2.38 - 7.2.39 7.2.40 - 7.2.41 7.2.42 7.2.43 7.2.44
Cylinder lock Cylinder push lock Cylinder cam lock Locking system Locking system
for glass sliding doors for glass sliding door for desk pedestals Stop Control Stop Control Plus
7.2.45 7.2.45 Group 6.1 Group 6.1/6.2 Group 6.1/6.2
This catalogue's range of "mechanical locks" is designed for fronts with a thickness of
Turn knobs for cylinder locks
19 mm. Depending on quantities ordered, many Prestige 2000 locks are also
see pages 7.2.48 - 7.2.52
available with cylinder housings in a length of 22 or 26 mm for thicker doors.
7.2.18 Mechanical furniture lock systems – Prestige 2000 for exchangeable barrels www.hettich.com
The decorative handle system Prestige 2000
for exchangeable barrels
Turn knobs
For operating cylinder locks and locks for square rods
7.2.49 - 7.2.53
Espagnolette lock for square rods Bow handle Round-Line and segment bow handle Hett-Line
7.2.24 - 7.2.25 For operating cylinder locks and locks for square rods
7.2.58 - 7.2.59
L L
R R R
L L L
R R
R R R
0∞
L L L
L
18
R
L
L L
R
18051
z.B. 7051
Example 2
Furniture lock key operations can be
distributed in any way among just a few
keys. One master key provides access to
all furniture.
18071
z.B. 7071 18072
z.B. 7072
Master
key
Example 3
Every lock must be locked and
unlocked with another key.
Key operations 18001 - 18500 and
18501 - 19000 are provided with
their own master keys.
One general master key provides
access to all furniture. 18601
z.B. 7014
Step 2 18011
z.B. 7011 18012
z.B. 7112 18600
z.B. 7013 18602
z.B. 7015
• Complete
the lock plan Master Master
key 1 key 2
General
master
key
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
Lock plan see page 7.2.63/7.2.65
18 _ _ _
Download at www.hettich.com/Prestige2000
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
Mechanical furniture lock systems – Prestige 2000 7.2.21
Cylinder espagnolette lock Prestige 2000
for exchangeable barrels
90∞
Logistical advantage:
1 lock housing for 2 locking directions
= half the stock for retailers/trade
The integrated slide mechanism converts the
right-hand lock (delivered as standard) into
a left-hand lock and vice versa ...
R.h./l.h. screw-on
Backset 15 mm Stop locking hook
15 8 26
19-20 12
6,25 16
10
4 7,5
L
32 20
18 55 ø18/16,5 ø18/16,5 ø19/17,5 ø24/ 3,75 14
22 3 28
R 32 5
8,5 6,5
18,5
20 2,5
28 14,5
ø7
Screw-on
Backset 25 mm Striker plate rod saddle
25 8 30
20
10 11
7,5 8 14
4
L 32 20 26
18 5526 ø18 / 16,5 ø18/16,5 ø19/17,5 ø24/ 16
22 1,25 11
R
32 5
8,5 6,5 6,5 14
28
14,5
39
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige locks and rosettes
Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
4,5
21
Top
L L
rod length =
A - 26 mm
A
R R
32
H=
internal 55
height
32
B
Bottom
rod length =
B - 26 mm
L L
21
4,5
R R
19 - 20
L L
Note:
Changing from
right to left is
only possible when
in locked position.
Logistical advantage:
1 lock housing for 2 locking directions
= half the stock for retailers/trade
The integrated slide mechanism converts the right-
hand lock (delivered as standard) into a left-hand
lock and vice versa ...
4,5
21 R R
L L
Top
rod length =
A - 26 mm
A
32
R
H= L
internal 55 R
height
32
B Bottom
rod length =
B - 26 mm
R
L
21
4,5
19 - 20
R
0∞
L
18
R
L
Note:
Cylinder turn knob/plain cylinder R
L
as well as espagnolette lock
with square rod must be engaged
for installation.
Logistical advantage:
1 lock housing for 2 locking directions
= half the stock for retailers/tradespeope
The integrated slide mechanism converts the right-
hand lock (delivered as standard) into a left-hand
lock and vice versa ...
Backset 15 mm Backset 25 mm
15 25
12,5 12,5
2,5 20 2,5 20 7,5
L 32 L 32
10 39 10
28
Tungsten carbine tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige locks and rosettes
Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
L L
R R
L L
R R
L L
Note:
Changing from right to left
is only possible when in
locked position.
Order no. PU
Z23, ø 18 mm Z25, ø 16,5 mm
0 079 736 9 078 963 1/10
15 - 40 20
7,5
17,5
45 18 ø 18/16,5 ø18/16,5 ø19/17,5 ø24/22
17,5
5 6,5
15
56 10,5
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige 2000 locks and rosettes
Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
Adjustment of backset
40 40
35 35
25
30 25
30
2 0 20
15 15
R R
40 40
35 35
25
30 25
30
20 20
5 5
R1 R1
4 0 4 0
30
35 30
35
25 25
20 20
5 5
R1 R1
0 0
30
35
4
30
35
4
25 25
20 20
5 5
L1 L1
32
19 6,5
42
Striker
1,2 10
Prestige 2000
cylinder push lock
• Complete with rosette 90∞
• Nickel-plated
21 1,5 22
7,5
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige 2000 locks, rosettes and
cylinder push lock Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only Rosettes 19 0 046 078 1
Cylinder push lock 22,3 0 046 076 1
30 6,5
2
43 3
Striker plate
1,25 8
Order no. PU
Z23, ø 18 mm Z25, ø 16,5 mm 20 30
0 072 300 9 078 887 1/10
0 077 894 9 078 889 1 set 11 14
40
D25
5
5,5 20
7,5
32
Order no. PU 43
13 ø18/16,5 ø18/16,5 ø19/17,5 ø24/22
Z23, ø 18 mm Z25, ø 16,5 mm
8
0 045 741 9 078 900 1/10 6,5
12
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige 2000 locks and rosettes
Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
Order no. PU
Z23, ø 18 mm Z25, ø 16,5 mm
right left right left
0 072 686 0 045 742 9 078 892 9 078 903 1/10
0 077 892 0 077 893 9 078 978 9 078 919 1 set
2,5
24 Striker plate
12 ø3
Lift
13,5 10,5
20 7,5
6,5
2 1
3,5
10
14 7
Shooting bar 10 x 3 mm
• Nickel-plated steel
L
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige 2000 locks and rosettes
Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
21
Top
rod length =
A A - 38 mm
32,5
H=
internal 53
height
32,5
B Bottom
rod length =
B - 38 mm
21
Striker plate
13,5 10,5
• Screw-on version
• Nickel-plated steel
17 8
Order no. PU
2 1
0 072 684 1/100
Striker plate 30
• Screw-on version 20
6
Order no. PU 23
Tungsten carbide tipped drill bit ø 20 mm for Wing striker plate Order no. PU
• Shaft 10 mm, cylindrical 0 046 077 1
• For upright and hand drills only
Cylinder shooting bar lock Adapt A combination of Adapt cylinder shooting bar lock and
appropriate ProDecor handles can be used for locking cabinets
One set contains:
with Wing 77 folding/sliding door fittings (see Group 4)
1 cylinder shooting bar lock Adapt for basic set Adapt
both securely and attractively.
+ ProDecor handle components
right locking
nickel-plated
1 adapter + fixing sleeve
1 Quick-fix makes easy, fast work of installing
A complete functional unit Adapt
handle/lock combinations with the espagnolette rod
contains:
or shooting bar already fitted.
2 push bar guides
Adapt basic cylinder shooting bar lock
2 stops Wing
set for ProDecor handles
+ Handle sleeve
+ Handle comp.
ProDecor Hett- or Round-Line
+ Shooting bar
+ Barrel
Order no. PU
Z23, ø 18 mm
0 079 739 1 set
4,5 3
10 10
Top
rod length =
A - 32 mm
2,5
24
12
Lift ø3
B 19 34
65
Bottom 30 53 ø19 ø26
rod length = 5
B - 32 mm
10 3,5 ø10
10 7
14
Hett-Line: 224
Round-Line: 128
2
6,5
6,5
ø24ø24ø20
ø20 ø18
ø6,5
18
18 14
Assembly
R
R
Tungsten-carbide tipped drill bit for Tungsten carbide drill bit for Hole dia. mm Order no. PU
quick-fix, Prestige 2000
cylinder shooting bar lock Adapt Quick-fix 18 0 046 087 1
and Wing striker plate Prestige 2000
• For upright and hand drills only Shooting bar lock 19 0 046 078 1
Wing Striker plate 20 0 046 077 1
Adapter
5 3 15 7,5
12,5
9,5
16 55
58
7,5
20
10 6
32 87 ø 18/16,5 ø18/16,5 ø19/17,5 ø24/22
9 Striker plate
6,5 1,25 8
3
1,8 20 30
11 14
Mounting application
Locked Open
13,5
22,5 12
71 15
20
32 16 ø18/
16,5
32
• Press-in type
• Complete with striker plate
• Nickel-plated
16 22 9 16 11
10,5
ø22 ø27
30
10,5 20
Mounting application
Lock in open position Lock in locked position
8 14
23
9
16 16
11
22
Order no. PU
0 046 800 1 set
ø 27
16 23 25 16
19 20 20 19
20 19 18 20
42 42 42
38
55 55
ø5
ø5 ø5
6
3,5
6 32 6
3,5 3,5
32 32
Locking bar
1200
20
1,5
7.2.38 Mechanical
Zubehör fürfurniture
Drehstangen
lock systems – Prestige 2000 www.hettich.com
Sliding-door cylinder lock Prestige 2000
for exchangeable barrels
for 3-door sliding-door cabinets
LW
Lock in Centrally positioned lock (A=B)
open position
L
Size A/B = – 50,5
2
A B
32 32 32
16 ø5
36 Off-centre lock (A≠B)
ø 22 L
Size A/B = – 50,5 ± Centre offset
2
L
Lock in
locked position
Assembly
2 1
ø2
2
16
16
16
16
16
16
6,5
2,7
8
Order no. PU
Z23, ø 18 mm Z25, ø 16,5 mm
right left right left
0 046 801 0 046 802 9 080 155 9 080 158 1/10
Lock catch
for cylinder lock for roller shutters 10
• For recessing
28,5 ø35
in a 35 mm drill hole
• Either for key operation or, ø35
21
when the bolts are extended,
ø35 25 52
for catch operation
21
• Nickel-plated 15
10
Order no. PU 2,7
8
7
0 046 809 1/10 10
Order no. PU 10
3
0 046 810 1/10 13
Tungsten carbide drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
cylinder lock for roller shutters,
rosettes, lock catches and striker Cylinder lock for roller shutters 18 0 046 087 1
• For upright and hand drills only Rosettes 19 0 046 078 1
Roller shutter lock and
lock catch 35 0 046 071 1
Exchangeable barrels see pages 7.2.62 - 7.2.65 Turn knobs for cylinder locks see pages 7.2.48 - 7.2.52
15
7 10
20
7,5
Order no. PU
Z23, ø 18 mm Z25, ø 16,5 mm 6,5
D20 8
0 046 481 9 078 907 1/10
35
27,5
66 20
27,5
6
Order no. PU
0 046 482 1/100
Tungsten carbide tipped drill for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
Prestige locks and rosettes
Prestige 2000 locks 18 0 046 087 1
• For upright and hand drills only
Rosettes 19 0 046 078 1
• Right/left locking
• For different panel thicknesses
• With cylinder lengths 15, 20 or 25 mm
• Alternatively for steel or wooden furniture
• Nickel-plated
19
1
14
15/20/25 13 2
25 ø 30 20,5 26
4 4
28
Drill/stamping pattern
16,5
ø19
Striker plate
• For cylinder door lock for glass
doors type 320 and type 321
• Nickel-plated steel 13,5 10,5
17 8
2 1
Order no. PU
0 072 684 1/100
Stop socket
• For cylinder door lock for glass doors type 320
and type 321
10
• Nickel-plated
ø12 ø10 ø8
Order no. PU
0 070 732 1/100
12
4
14
5-8
ø30
45
32
1,5
Bolt
32
Order no. PU
0 076 483 1
0-2 21 29 L
R
ø18 ø33
Order no. PU
right left
9 080 739 9 080 740 1/10
Turn knob
Type 472 N
• With rubber rings
• Complete with securing sleeve
• Nickel-plated matt
L
21 29
0-2
ø18 ø33
Order no. PU
9 080 741 1/10
Disassembly pin
Order no. PU
9 080 761 1
9 7 11,5 29
18 1
4 6 8
M4 M5
Order no. PU ø10 7 ø24 ø21 7 ø33
right left
0 072 244 0 072 245 1
Turn knob
Type 472
• With rubber rings
• Complete with securing sleeve
• Suitable for panel thicknesses
from 18 - 21 mm
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø33
Order no. PU
0 072 536 1
Fixed knob
Type 474
• With rubber rings
• Complete with screw,
washer, spacer
• Nickel-plated matt
5 29
30
M5
ø10 ø5 ø30 ø5,2 ø24 ø28 ø33
Order no. PU
0 072 538 1 1,5 1
Tungsten carbide drill bit dia. 24 mm for securing sleeve/washer Order no. PU
• Shaft 10 mm, cylindrical 0 046 075 1
• For upright and hand drills only
0-2 21 29
L
Order no. PU
right left
9 080 742 9 080 743 1/10
Turn knob
Type 412 N
• Complete with securing sleeve
• Nickel-plated matt
21 29
L
0-2
R
ø18 ø38
Order no. PU
9 080 744 1/10
Disassembly pin
Order no. PU
9 080 761 1
18 1 9 7 11,5 29
4 6 8
M4 M5
Order no. PU ø10 7 ø24 ø21 7 ø38
right left
0 072 248 0 072 249 1/10
Turn knob
Type 412
• Complete with securing sleeve
• Suitable for panel thicknesses
from 18 - 21 mm
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø38
Order no. PU
0 072 171 1/10
Fixed knob
Type 414
• Complete with screw,
washer, spacer
• Nickel-plated matt
5 29
30
M5
ø10 ø5 ø30 ø5,2 ø24 ø28 ø38
Order no. PU
0 072 250 1/10 1,5 1
0-2 21 29
Order no. PU
right left
9 080 758 9 080 759 1/10
Turn knob
Type 452 N
• Complete with securing sleeve
• Nickel-plated matt
0-2 21 29 L
ø18 ø31 R
Order no. PU
9 080 760 1/10
Disassembly pin
Order no. PU
9 080 761 1
Prestige 2000
Cylinder turn knob
Type 451
• Complete with securing sleeve
• Suitable for panel thicknesses
from 18 - 21 mm
• Prestige 2000 for exchangeable barrels
• Left handle is marked
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
Order no. PU ø10 7 ø24 ø21 7 ø31
right left
0 072 135 0 072 136 1/10
Turn knob
Type 452
• Complete with securing sleeve
• Suitable for panel thicknesses
from 18 - 21 mm
• Nickel-plated matt
18 1 9 7 11,5 29
4 6 8
M4 M5
ø10 7 ø24 ø21 7 ø31
Order no. PU
0 072 179 1/10
Fixed knob
Type 454
• Complete with screw,
washer, spacer
• Nickel-plated matt
5 29
30
M5
ø10 ø5 ø30 ø5,2 ø24 ø28 ø31
Order no. PU
0 072 229 1/10 1,5 1
36,5 19
5 15 10,5+0,3
15 R5
ø8 ø8
32 80
7 ø24 32 76,5
40
ø8 ø8
M4 48
Finish Order no. PU
10,5 +0,3 24
nickel-plated matt 0 041 618 1 ø5 ø5
36,5 19
5 10,5+0,3
15 R5
ø8 ø8
32 80 32 76,5
40
ø8 ø8
M4 48
Finish Order no. PU
nickel-plated matt 0 041 622 1 10,5 +0,3 ø8 ø8
aluminium finish 0 041 624 1 19 15
Tungsten carbide tipped drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
fixing handle, for sockets
and for system drill hole Fixing of handles 5 0 046 083 1
• For upright and hand drills only Sockets 8 0 046 081 1
System drill hole 24 0 046 075 1
40 12
8 25
13 32 43 ø 12
7
Order no. PU 5
M4
ø5 ø5
40
15
M4
ø8 ø8
40
24
Finish Order no. PU
nickel-plated matt 0 041 688 1
aluminium finish 0 041 691 1
36,5 19
5 10,5+0,3
15 R5
ø8 ø8
64 7 80 ø24 64 76,5
40
48
ø8 ø8
M4
10,5+0,3 24
ø5 ø5
19
Finish Order no. PU 15
nickel-plated matt 0 041 612 1 Attention: Adjust espagnolette lock to right-hand operation on right
aluminium finish 0 041 614 1 and left-hand doors
36,5 19
5 10,5+0,3
15 R5
ø8 ø8
64 80 64 76,5
40
48
ø8 ø8
Finish Order no. PU M4
10,5 +0,3
nickel-plated matt 0 041 615 1 19
ø8 ø8
Tungsten carbide tipped drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
fixing handle, for sockets
and for system drill hole Fixing of handles 5 0 046 083 1
• For upright and hand drills only Sockets 8 0 046 081 1
System drill hole 24 0 046 075 1
36,5 19
5 15 9 +0,3
15 R5
ø5
ø8
ø5
64 7 80 ø24 64 76,5
40
M4
48
ø8
ø5
9+3 ø5 ø5 24
19
Finish Order no. PU 15
nickel-plated matt 0 041 605 1 Attention: Adjust espagnolette lock to right-hand operation on right
aluminium finish 0 041 607 1 and left-hand doors
36,5 19
15 10,5+0,3
15 R5
ø5
ø5
40 64 80 64 76,5
M4
48
Tungsten carbide tipped drill bit for Tungsten-carbide drill bit for Hole dia. mm Order no. PU
fixing handle, for sockets
and for system drill hole Fixing of handles 5 0 046 083 1
• For upright and hand drills only Sockets 8 0 046 081 1
System drill hole 24 0 046 075 1
!
14
Knob with handle receptacle on one side Knob with through bore
• For combining with 1 ProDecor Prestige 2000 • For combining with 2 ProDecor Prestige 2000
handle Round-Line and Hett-Line handles Round-Line and Hett-Line
• Nickel-plated matt • Nickel-plated matt
34 34
5 5
ø26 ø26
22 22
ø10 ø10
224 224
Knob
• Nickel-plated matt
27
5 ø26
18
Order no. PU
0 078 733 1
Tungsten carbide tipped drill bit Tungsten-carbide drill bit for Hole dia. mm Order no. PU
for fixing handles, for quick-fix
and for cylinder knobs Fixing of handles 5 0 046 083 1
• For upright and hand drills only Quick-fix 18 0 046 087 1
Cylinder knobs 24 0 046 075 1
192 192
192
ø10
224
Order no. PU
0 078 739 1/5
5
Order no. PU Order no. PU
0 078 724 1 6 0 046 617 1
128 128
ø10 ø10
10
5
Order no. PU Order no. PU 5
32 32
0 078 765 1 0 073 852 1
15,5
ø18
ø 6,5 M6 M4
M6
14
Plain cylinder
Type 723
• Cylinder length 22 or 30 mm with key retention
• “Problem-solver” in case of thick doors
for espagnolette lock for square rods
• Complete with rosette for
24 mm dia. system drill hole and 2 double-profile keys
• Nickel-plated
15,5 24
32
8
M5
ø10 ø24 7 ø18 ø23 ø18
3
22
30
Securing sleeve
Type 731
• With square nut 7 x 7 mm
for door thicknesses 16 - 22 mm
Order no. PU
9 078 968 1/5
Guide sleeve
Type 731 ø18
• For securing sleeve type 731
ø14,4 14 1
Order no. PU
9 078 976 1/100
Project: _______________________________
_______________________________
Z23, ø 18 mm
Room Key operation Order no. Piece
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
Project: _______________________________
_______________________________
Z25, ø 16,5 mm
Room Key operation Order no. Piece
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
18 _ _ _
+ +
Order no. PU
0 072 509 1
Assembly/Disassembly
Unlock cylinder lock Insert removal key Remove barrel With key inserted,
Remove key with removal key push "new" barrel
He in as far as it will go.
ttic
h Done.
L L
L
L
He He
ttic ttic
h h
Safety at home
B Bottom
rod length
= B - 26 mm
21
4,5
19 - 20
! Espagnolette lock
single key operation
screw-on version
press-in version
15
25
15
25
0 072 213
0 072 217
0 072 221
0 072 225
0 072 214
0 072 218
0 072 222
0 072 226
1/10
1/10
1/10
1/10
Espagnolette lock set for square rot screw-on version 25 0 077 883 0 077 884 1 set
Backset 15 mm, Backset 25 mm, R.h./l.h. screw-on
screw-on version screw-on version Stop locking hook
15 8 25 8 26
19-20 12
6,25 16
10 10
4 4
32 32
18 4 55 4 3,75 14
18 55 26 3 28
32 5 32 5
8,5 8,5 18,5
28 20 2,5
28
14,5 39 14,5
ø7
Backset 15 mm, Backset 25 mm, Screw-on
press-in version press-in version Striker plate rod saddle
15 88 25 88 30
20
10 ø8 10 ø8 11
4 8 14
32 4
32
4 55 26
18 18 4 55 26 16
32 1,25 11
5 32 5
8,5 8,5 6,5 14
28 28
14,5 39 14,5
Backset 15 mm Backset 25 mm
Finish Order no. Finish Order no.
right left PU right left PU
nickel-plated 0 072 510 0 072 511 1/10 nickel-plated 0 072 514 0 072 515 1/10
bronze 0 079 765 0 079 767 1/10 bronze 0 079 769 0 079 771 1/10
D15 D25
12 12
2,5 2,5
32 32
23 50 23 50
4 4
32 5 32 5
9 9
29 10 39 10
Key type 08
74
ø6 25
13,5
41
Key type 20
65
ø6 25
13
Key type 27
64
ø6 27
13,5
37
Key type 09
70
• High-gloss nickel-plated
ø6 13 21
Order no. PU
0 048 596 1/10 49
Key type 81
• Nickel-plated beech
70
ø6 27
13
Order no. PU
40
0 072 717 1/10
ø18
Finish Order no. PU
brass-plated 0 044 561 1/10 22 11 3,3
nickel-plated matt 0 044 560 1/10
ø18
Finish Order no. PU
brass-plated 0 030 149 1/10
nickel-plated matt 0 044 557 1/10 25 11
29 20,5
Finish Order no. PU
brass-plated 0 043 894 1/10 10 11 3,5
nickel-plated matt 0 043 893 1/10 13,5
20,5
Finish Order no. PU
brass-plated 0 043 886 1/10
10
nickel-plated matt 0 043 885 1/10 13,1
11 1
Escutcheon 19
• System drill hole diameter 24 mm
ø24
Finish Order no. PU
brass-plated 0 040 043 1/10
ø28
nickel-plated matt 0 046 303 1/10 17
Tungsten-carbide tipped drill bit for escutcheons Hole dia. mm Order no. PU
• Shaft 10 mm, cylindrical 18 0 046 087 1
• For upright and hand drills only
24 0 046 075 1
Key type 13
• Length 70 mm
• Bronze
Order no. PU
0 030 144 1/10
Key type 16
• Length 70 mm
• Bronze
Order no. PU
0 030 146 1/10
Key type 18
• Length 70 mm
• Bronze
Order no. PU
0 030 148 1/10
55 48
Order no. PU
0 078 021 1/10
28 ø18
Order no. PU
0 030 152 1/10 7 11
R 24 mm escutcheon drill hole diameter
espagnolette locks for L
square rods
m
4m Securing sleeves
ø2
(are enclosed with turn handles)
Plain cylinder
L
Type Z23
Spacer rosette
Exquisit
Z19 cylinder locks Z23 barrel
Spacer rosette
Order no. PU
0 040 176 1/10 10
Espagnolette lock
without cover profile
Exquisit
Cylinder espagnolette lock Z19
4,5
21
32
Top rod
length =
A - 26 mm
A
Prestige 2000
Cylinder espagnolette lock
for exchangeable Z23/Z25 barrels 32
32
H=
55
internal
height
32
32
Espagnolette lock B
Bottom
for square rods rod length =
B - 26 mm
32
21
4,5
Espagnolette lock
with single key operation 19 - 20 32
Locking hook
• Nickel-plated
26
16
14
28
18,5
Order no. PU
right left
0 072 266 0 072 267 1/10
Rod saddle
• For use without cover profile
• Nickel-plated
11
26
16
6,5 14
Order no. PU
0 072 274 1/20
Espagnolette lock
with cover profile
Exquisit
Cylinder espagnolette lock Z19
4
15,5 32
32
H=
internal 55
height
32
32
B
Espagnolette lock
for square rods Cover profile
B - 47 mm Bottom
rod length
= B - 28 mm
32
15,5
4
Espagnolette lock
32
with single key operation
19 - 20
10 13,5
Length mm Order no. PU
1000 0 072 255 1/10
1500 0 072 256 1/10
Locking hook
• For use with cover profile
• Screw-on version
• Nickel-plated 28
16
10
17,5
5 11,5
Order no. PU
right left
0 013 980 0 013 984 1/10
• Black plastic
ø8
Order no. PU
0 072 265 1/20
Stop pin 4
• Centric
• Nickel-plated 13
15
Order no. PU
0 030 103 1/100 7,5
Stop pin 4
• Eccentric
• Nickel-plated 13
15
Order no. PU
0 030 102 1/100 7,5
Stop pin 10
M6
• Centric with socket
• Plastic, self-colour/nickel-plated
10
15
Order no. PU
0 030 104 1/100
7,5
Stop pin 10
M6
• Eccentric with socket
• Plastic, self-colour, nickel-plated
10
15
Order no. PU
0 030 105 1/100 7,5
Stop pin
19 - 20 12
• Nickel-plated 6,25
4
3
2,5
20
Order no. PU
0 058 797 1/100 ø7
• Plastic
21
55 30
Finish Order no. PU 21
10 32 37
Order no. PU
47
0 079 786 1/100
10 32 25,5 14
Order no. PU 47
0 079 788 1/100
• Nickel-plated steel
34 4
80 32,5
34
Order no. PU
0 045 750 1/100
5
Lock
Order no. PU
0 069 646 10 sets
Overlay door
25
31
8
15 40
31
max. 55
max.
ø7
20
Inset door
25
8 Attention:
Safe-Fix contains very strong magnets. Therefore
15 please do not allow Safe-Fix to come into direct
contact with credit cards, video tapes or sound
max. 55
max. recording media.
ø7
20
• Card-operated lock for added safety in the home Open drawer a short
• Prevents direct access distance …
• Adjustable for right/left-hand operation
(supplied for right-hand operation)
• Complete with 2 key cards
• White plastic
Opening catch
Card lock
Order no. PU
0 041 593 1 set
! Supplementary items
10 EasyLock spare key cards
max. 40 mm
30 19 30 27 30 19 30 27
65 29
13 22 20 20
8
14 14
81
81 81
Order no. PU
0 048 259 1/10
Top panel
12
17
10
39
10
min. 400
36 8 3,5
11,5 26 2 3,5
31,5 11,5
4,2 3 44
10 32,5
10 9,5
17 34 18
Order no. PU
0 046 284 1/20
29 51 57
ø14
17 34 18
Order no. PU
0 046 285 1/20
30 5,5
16
Order no. PU
0 020 873 1/20
44 57 37 51
2
13 15 15
44 57 39 50
2 16
16 16
76 92 75 85
2 16 16
16
ø14 ø13,6
1,4 15
19
35 46
19
17,5 19
45 46
17,5 19
17,5 18,5
45 46
17,5 18,5
12 4 6 15 4,5
6 13,5
18,75 16
49 44
18,75 16
12 5 7,5 36 6,5
7,5 14
18,75 16
49 44
18,75 16
12 5 7,5 36 6,5
7,5 14
12 5 7,5 12 4,5
7,5 13
Finish Order no. PU
white 0 013 143 1/50
brown 0 013 144 1/50
12 5 7,5 12 4,5
Finish Order no. PU 7,5 13
12 4 7 9 4,5
18,5 19
45,5 47
18,5 19
13 9 9
4,5 4,5 13
19 19,5
47 48,5
19 19,5
13 5 5,5 12 10
5,5 13
21 21,5
51,5 52
21 21,5
15 4,5 6 12,5 10
6 15
Plastic catch
• Screw-on version
• White plastic
25 31 25 31
27 15
Order no. PU
0 000 381 1 set
2
8 2
26 17 39 49
2
2
8
36 24 39
22,5 60
11