Professional Documents
Culture Documents
Ffa08 - g05 - en (Drawer & Runner Systems)
Ffa08 - g05 - en (Drawer & Runner Systems)
Group 5
5.1.0 - 5.1.7
easys can be included in the planning without difficulty. For the system is
compactly and slimly concealed behind the rear panel of the drawer. The planned
storage space in the drawer or pot-and-pan drawer is retained without restriction.
easys is suitable for all widths and depths. Two drive units ensure that large, heavy
drawers exeeding 40 kg or wider than 900 mm move easily inside cabinets.
Drive unit
• For opening the drawer/pot-and-pan drawer
• Toolless assembly on mounting profiles with automatic power supply
• Driving force can be adjusted in several stages
• Two drive units are preferably used per drawer/pot-and-pan drawer
for parallel opening in cabinets with a width of more than 900 mm or
with drawers weighing more than 40 kg (synchronization can be set
on the drive unit)
• For use in the following countries:
Belgium, Bulgaria, Denmark, Germany, Estonia, Finland,
France, Greece, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Austria,
Poland, Portugal, Romania, Sweden, Switzerland, Slovakia,
Slovenia, Spain, Czech Republic, Hungary, United
Kingdom, Cyprus
– other countries on request
Order no. PU
9 078 139 1
Set contains:
1 pcs mounting profile with integrated
power and data cables
1 pcs mounting profile without cables
Mounting set
• For securing the mounting profiles to the top
and bottom of the cabinet
Set contains:
1 pcs mounting profile retainer, bottom,
complete with power feeder and 800 mm
connecting cable
1 pcs mounting profile, top
Order no. PU
9 082 357 1 set
Mounting bracket
• Used instead of the mounting profiles for special
installation situations
• For one drive unit
• With 800 mm connecting cable
Order no. PU
9 082 358 1
Distribution block
• One distribution block is required per cabinet
Order no. PU
9 082 360 1
Extension lead
• For connecting from one distribution block to the next
• Length 1500 mm
Order no. PU
9 082 362 1
Order no. PU
9 082 363 1
Order no. PU
9 082 364 1
External sensor
• For reliable activation with
very high drawer fronts
Order no. PU
9 079 944 1
Drawer silver steel anthracite steel stainless steel brushed solid beech
www.intelligent-kitchens.com
Intelligent Kitchens
works in every kitchen!
Intelligent Kitchens makes every kitchen an intelligent kitchen.
Pots
and pans
Cleaning Food
and waste preparation
China
and cutlery
Food storage
G-shaped kitchen Island kitchen
www.intelligent-kitchens.com
Intelligent Kitchens 5.2. 9
Intelligent Kitchens
Food storage
The ideal place for provisions:
Out of the way yet always to hand.
InnoTech Pantry unit, page 5.2.62 Dispensa Pantry unit, page 9.1.95 Arena CLASSIC drawers,
see page 9.1.22
Many items stored away, yet with everything in view and easily
reached: Storage and pantry units with convenient pull-outs.
Organised and clearly in view right to the very back:
Fully extending pull-out elements or drawers with versatile
internal organisers.
Food preparation
Always in reach when preparing meals:
Food and cooking utensils are ideally stored near the cooker or below the hob.
Cosario, page 9.1.122 OrgaTray Basic, see page 5.2.79 OrgaTray DeLuxe, see page 5.2.92
OrgaFlag,
page 5.2.99
LeMans, page 9.1.49
Pot-and-pan-drawers perfectly organised:
Keeping saucepans and lids in place.
Corner units fully under control with LeMans
– the curvaceous star among corner-unit fittings.
Waste sorting systems, see page 9.1.65 OrgaFlex, see page 5.2.106
OrgaTray Premium, see page 5.2.88 OrgaTray Exclusiv, see page 5.2.90
260 0 045 298 9 079 636 0 045 304 9 079 654 0 045 309 9 079 668 0 072 911 9 079 677 0 072 998 9 079 683 0 073 273 9 079 689
300 9 079 229 9 079 638 9 079 230 9 079 656 9 079 231 9 079 670 – – – – – –
350 0 045 299 9 079 640 0 045 305 9 079 659 0 045 310 9 079 671 0 078 505 9 079 678 0 079 002 9 079 684 0 079 003 9 079 690
420 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691
470 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692
520 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693
620 – – – – – – – – – – – –
0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911
0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910
– – – 0 045 598 – – –
Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control
length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5
PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets
300 9 079 070 9 079 694 9 079 077 9 079 049 9 079 081 9 079 059 – – – – –
350 9 079 074 9 079 697 9 079 079 9 079 054 9 079 083 9 079 061 – – 9 079 096 9 079 111 9 079 123
420 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 – – 9 079 097 9 079 113 9 079 124
470 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 0 044 976 0 046 689 9 079 101 9 079 116 9 079 127
520 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 0 044 979 0 046 691 9 079 103 9 079 117 9 079 129
620 0 040 269 9 079 044 0 040 270 9 079 058 0 040 271 9 079 068 0 044 983 0 046 692 – – –
Description Finish
Corner clip for aluminium finish - 9 079 115
drawer front stainless steel finish - 9 079 125
Exclusiv
260 0 045 298 9 079 636 0 045 304 9 079 654 0 045 309 9 079 668 0 072 911 9 079 677 0 072 998 9 079 683 0 073 273 9 079 689
300 9 079 229 9 079 638 9 079 230 9 079 656 9 079 231 9 079 670 – – – – – –
350 0 045 299 9 079 640 0 045 305 9 079 659 0 045 310 9 079 671 0 078 505 9 079 678 0 079 002 9 079 684 0 079 003 9 079 690
420 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691
470 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692
520 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693
620 – – – – – – – – – – – –
– – – – 0 045 598
grey plastic/
satin glass
aluminium silver
anodised
– 9 079 329
– 9 079 330
Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control
length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5
PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets
300 9 079 070 9 079 694 9 079 077 9 079 049 9 079 081 9 079 059 – – – – –
350 9 079 074 9 079 697 9 079 079 9 079 054 9 079 083 9 079 061 – – 9 079 096 9 079 111 9 079 123
420 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 – – 9 079 097 9 079 113 9 079 124
470 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 0 044 976 0 046 689 9 079 101 9 079 116 9 079 127
520 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 0 044 979 0 046 691 9 079 103 9 079 117 9 079 129
620 0 040 269 9 079 044 0 040 270 9 079 058 0 040 271 9 079 068 0 044 983 0 046 692 – – –
Description Cabinet Preassembled drawer, Preassembled internal drawer Basic, Preassembled internal drawer Exclusiv,
width height 70 mm height 70 mm height 70 mm
mm Nominal length mm Nominal length mm Nominal length mm
420 470 520 420 470 520 420 470 520
Preassembled 275 0 078 400 0 078 408 0 078 416 - - - - - -
drawer/
pot-and-pan 300 0 078 401 0 078 409 0 078 417 0 078 401 0 078 409 0 078 417 0 078 401 0 078 409 0 078 417
drawer 350 0 078 402 0 078 410 0 078 418 - - - - - -
400 0 078 403 0 078 411 0 078 419 0 078 403 0 078 411 0 078 419 0 078 403 0 078 411 0 078 419
450 0 078 404 0 078 412 0 078 420 0 078 404 0 078 412 0 078 420 0 078 404 0 078 412 0 078 420
500 0 078 405 0 078 413 0 078 421 0 078 405 0 078 413 0 078 421 0 078 405 0 078 413 0 078 421
550 0 078 406 0 078 414 0 078 422 – – – 0 078 406 0 078 414 0 078 422
600 0 078 407 0 078 415 0 078 423 0 078 407 0 078 415 0 078 423 0 078 407 0 078 415 0 078 423
800 – 0 013 248 0 013 252 – 0 013 248 0 013 252 – 0 013 248 0 013 252
900 – 0 013 249 0 013 253 – 0 013 249 0 013 253 – 0 013 249 0 013 253
1000 – 0 013 250 0 013 254 – 0 013 250 0 013 254 – 0 013 250 0 013 254
1200 – 0 013 251 0 013 255 – 0 013 251 0 013 255 – 0 013 251 0 013 255
Front connectors
• With expanding dowel 0 077 911 0 077 911 0 077 911 – – – – – –
• Screw-on 0 077 910 0 077 910 0 077 910 – – – – – –
400 – – – 0 041 722 0 041 722 0 041 722 9 079 145 9 079 145 9 079 145
450 – – – 9 079 112 9 079 112 9 079 112 9 079 147 9 079 147 9 079 147
500 – – – 0 041 730 0 041 730 0 041 730 9 079 148 9 079 148 9 079 148
600 – – – 0 041 740 0 041 740 0 041 740 9 079 310 9 079 310 9 079 310
800 – – – 0 041 750 0 041 750 0 041 750 9 079 311 9 079 311 9 079 311
900 – – – 0 041 752 0 041 752 0 041 752 9 079 312 9 079 312 9 079 312
1000 – – – 0 041 753 0 041 753 0 041 753 9 079 313 9 079 313 9 079 313
1200 – – – 9 079 114 9 079 114 9 079 114 9 079 314 9 079 314 9 079 314
Longitudinal railing for
internal drawer Basic – – – – – – – – –
Corner clip for
drawer front Exclusiv, – – – – – – 9 079 115 9 079 115 9 079 115
aluminium finish
420 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691
470 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692
520 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693
Preassembled pot-and-pan drawer, Preassembled internal pot-and-pan drawer Preassembled internal pot-and-pan drawer
height 144 mm Basic, height 144 mm Exclusiv, height 144 mm
Nominal length mm Nominal length mm Nominal length mm
420 470 520 420 470 520 420 470 520
0 013 257 0 013 265 0 013 277 0 013 257 0 013 265 0 013 277 0 013 257 0 013 265 0 013 277
0 013 259 0 013 267 0 013 279 0 013 259 0 013 267 0 013 279 0 013 259 0 013 267 0 013 279
0 013 260 0 013 268 0 013 280 0 013 260 0 013 268 0 013 280 0 013 260 0 013 268 0 013 280
0 013 261 0 013 269 0 013 281 0 013 261 0 013 269 0 013 281 0 013 261 0 013 269 0 013 281
0 013 262 0 013 270 0 013 282 – – – 0 013 262 0 013 270 0 013 282
0 013 263 0 013 271 0 013 283 0 013 263 0 013 271 0 013 283 0 013 263 0 013 271 0 013 283
– 0 013 272 0 013 284 – 0 013 272 0 013 284 – 0 013 272 0 013 284
– 0 013 273 0 013 285 – 0 013 273 0 013 285 – 0 013 273 0 013 285
– 0 013 274 0 013 286 – 0 013 274 0 013 286 – 0 013 274 0 013 286
– 0 013 275 0 013 287 – 0 013 275 0 013 287 – 0 013 275 0 013 287
– – – 0 041 756 0 041 756 0 041 756 9 079 362 9 079 362 9 079 362
– – – 0 041 760 0 041 760 0 041 760 9 079 366 9 079 366 9 079 366
– – – 9 079 327 9 079 327 9 079 327 9 079 372 9 079 372 9 079 372
– – – 0 041 770 0 041 770 0 041 770 9 079 374 9 079 374 9 079 374
– – – 0 041 780 0 041 780 0 041 780 9 079 378 9 079 378 9 079 378
– – – 0 041 782 0 041 782 0 041 782 9 079 385 9 079 385 9 079 385
– – – 0 041 790 0 041 790 0 041 790 9 079 387 9 079 387 9 079 387
– – – 0 041 793 0 041 793 0 041 793 9 079 388 9 079 388 9 079 388
– – – 9 079 328 9 079 328 9 079 328 9 079 389 9 079 389 9 079 389
Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control
length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5
PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets
420 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 – – 9 079 097 9 079 113 9 079 124
470 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 0 044 976 0 046 689 9 079 101 9 079 116 9 079 127
520 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 0 044 979 0 046 691 9 079 103 9 079 117 9 079 129
Can be used as
• Drawer/pot-and-pan drawer
• Internal drawer/internal
pot-and-pan drawer
Material/Finish
• Powder-coated steel, silver
Can be used as
• Drawer/pot-and-pan drawer
• Internal drawer/internal
pot-and-pan drawer
Material/Finish
• Powder-coated steel, silver
• Powder-coated steel, anthracite
Can be used as
• Drawer/pot-and-pan drawer
• Internal drawer/internal
pot-and-pan drawer
Material/Finish
• Beech lacquered
Can be used as
• Drawer/pot-and-pan drawer
• Internal drawer/internal
pot-and-pan drawer
InnoTech wood
5.2.56 – 5.2.61
o-O p en
-T
h
Pus
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation 70 70 70 70
height 97 103 12 108 12 94
12
For further 9,5 9,5 9,5 9,5
details see page 36 16 16 47 16 33 16
42
5.2.66 - 5.2.70 12
32 32 32 32
4,5 4,5 4,5 4,5
14 14 14 14
40,5 16 46,5 16 16 37,5 16
51,5
KD
KD EB KD EB KD EB KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
ø3,5x20
D
9 65,5
38
A
B 10
LB
2x
LB = inside cabinet width ø3,5x12
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Nominal length Order no. PU
mm silver anthracite
470 9 079 029 9 079 037 1 set
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
installation ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
54 54 54 54
height 81 12
87
12 92 12 78
9,5 9,5 9,5 9,5
For further 16 16 33 16
36 16 42 47
details see page 12
5.2.66 - 5.2.70
KD EB KD EB KD EB KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
D 9
38
53
A 10
B
LB 2x
ø3,5x12
LB = inside cabinet width
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Aluminium back panel
• Custom length
• Length 2000 mm
• Pan-head screws ø 3,5 x 20 mm
• Powder-coated
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
144 144 144 144
For further 177 183 188 174
details see page
5.2.66 - 5.2.70
12 9,5 12 9,5 12 9,5 9,5
36 16 42 16 47 16 33 16
12
96
96 96 96
KD EB KD EB KD EB
KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
3x
D ø3,5x12
2x
144 ø3,5x20
A 9
B 44
LB
10
LB = inside cabinet width
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
176 176 176 176
For further 209 215 220 206
details see page
5.2.66 - 5.2.70
12 9,5 12 9,5 12 9,5 9,5
36 16 42 16 47 16 33 16
12
ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12
128
128 128 128
4,5 32 4,5 32 32 32
4,5 4,5
14 14 14 14
40,5 16 46,5 16 16 37,5 16
51,5
KD EB KD EB KD EB
KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
3x
D
ø3,5x12
176
A
B 9
44
LB
LB = inside cabinet width 10
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Order no. PU
0 077 913 1
Aluminium front panel Basic Cabinet width Order no. Corner connector for drawer front
• With premounted corner connectors mm PU 1 PU 20 Basic
• For standard cabinet widths • Grey plastic
300 0 041 720 9 025 977
• Anodised silver Order no. PU
400 0 041 722 9 025 981
0 044 926 1/10 sets
450 9 079 112 9 025 982
500 0 041 730 9 025 983 Aluminium front panel Basic
600 0 041 740 9 025 984 • Custom length
800 0 041 750 9 047 869 • Length 2000 mm
900 0 041 752 9 025 985 • Anodised silver
1000 0 041 753 9 025 987 Order no. PU
1200 9 079 114 9 025 988 0 044 925 1
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/ min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2
ø4x40 Interior panel
min. 2 ø4x40 Interior panel
minimum
installation
height ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
70 70 70 70
For further 102 108
113 12
100
12 12
details see page
9,5 9,5 9,5 9,5
5.2.66 - 5.2.70 36 42
16 16 47 16 34,5 16
12
min. 2
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
Order no. PU
0 013 952 1
D ø3,5x20
9 65,5
E A 38
B
LB 10
Glass drawer front Exclusiv Corner connectors for glass drawer front Exclusiv
• For standard cabinet widths • Corner connector, lacquered zinc die-cast
• Satin • Profiled retainer, length 1042 mm, aluminium lacquered/anodized
• Front connectors and screws
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/ min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel
minimum
installation
ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
height
107 70 113 70 70 105 70
For further 118
12 12 12
details see page 9,5
9,5 9,5 9,5
5.2.66 - 5.2.70 36 42 16
16 16 34,5 16
47
12
min. 2
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
102 32
14,5 LB - 2 x EB - 21 14,5
0 013 952 1
56 ø3,5x20
D
105
9 65,5
A 38
B
LB 10
F
2x
LB = inside cabinet width ø3,5x12
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Size Wooden rear panel Aluminium rear panel
A Bottom panel depth NL + 10 NL - 3
B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 Dimensions Order no. PU
C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 mm
D Rear panel height 65,5 – ø 3,5 x 12 0 045 167 200
F Profiled retainer LB - 2 x EB - 101 LB - 2 x EB - 101 ø 3,5 x 20 0 045 168 200
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
Order no. PU
0 013 952 1
G D
3x
ø3,5x12
B A 2x
144 ø3,5x20
E LB 9
LB = inside cabinet width 44
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
10
Size Wooden rear panel Aluminium rear panel
A Bottom panel depth NL + 10 NL - 3
B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5
C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63
D Rear panel height 144 – Dimensions Order no. PU
E Aluminium mm
front panel LB - 2 x EB - 71,5 LB - 2 x EB - 71,5 ø 3,5 x 12 0 045 167 200
G Crosswise railing LB - 2 x EB - 2 LB - 2 x EB - 2 ø 3,5 x 20 0 045 168 200
Glass drawer front Exclusiv Corner connectors for glass drawer front Exclusiv
• For standard cabinet widths • Corner connector, lacquered zinc die-cast
• Satin • Profiled retainer, length 1042 mm, aluminium lacquered/anodized
• Front connectors and screws
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel
for Quadro/
minimum ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
For further 181 144 187 144 192 144 179 144
details see page
5.2.66 - 5.2.70
12 12 12
9,5 9,5 9,5 9,5
36 16 42 16 47 16 34,5 16
12
min. 2
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
56
D
179 3x
ø3,5x12
A 2x
B 144 ø3,5x20
9
F LB 44
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation 70 70 70 70
height 97 103 12 108 12 94
12
For further 9,5 9,5 9,5 9,5
details see page 36 16 16 47 16 33 16
42
5.2.66 - 5.2.70 12
32 32 32 32
4,5 4,5 4,5 4,5
14 14 14 14
40,5 16 46,5 16 16 37,5 16
51,5
KD
KD EB KD EB KD EB KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
144 144 144 144
For further 177 183 188 174
details see page
5.2.66 - 5.2.70 12 9,5 12 9,5 12 9,5 9,5
36 16 42 16 47 16 33 16
12
96
96 96 96
KD EB KD EB KD EB
KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/ min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel
minimum
installation
height ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
70 70 70 70
For further 102 108
113 12
100
12 12
details see page
9,5 9,5 9,5 9,5
5.2.66 - 5.2.70 36 16 42 16 16 34,5 16
47
12
min. 2
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
Order no. PU
0 013 952 1
Glass drawer front Exclusiv Corner connectors for glass drawer front Exclusiv
• For standard cabinet widths • Corner connector, zinc die-cast with aluminium finish
• Satin • Profiled retainer, length 1042 mm, aluminium silver anodised
• Front connectors and screws
Cabinet width Order no. PU
mm
300 9 079 143 1
400 9 079 145 1
450 9 079 147 1
500 9 079 148 1
550 9 079 309 1
600 9 079 310 1
800 9 079 311 1
900 9 079 312 1
1000 9 079 313 1 Order no. PU
1200 9 079 314 1 9 079 115 1
Technical information see page 5.2.116
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel
for Quadro/
minimum
installation ø4 ø6,3 ø4 ø6,3
ø4 ø6,3 ø4 ø6,3
height
107 70 113 70 70 105 70
For further 12 12
118
12
details see page 9,5 9,5 9,5 9,5
5.2.66 - 5.2.70 36 16 42 16 16 16
47 34,5
12
min. 2
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
102 32
14,5 LB - 2 x EB - 21 14,5
0 013 952 1
Aluminium front panel Basic 22 Lengthwise railings for preassembled internal pot-and-pan drawer
• With premounted corner • Powder-coated steel, silver
connectors, grey plastic • The longitudinal railing supplied with the
• For standard cabinet widths preassembled front drawer must not be used
• Anodised silver
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
Order no. PU
0 013 952 1
Glass drawer front Exclusiv Corner connectors for drawer front Exclusiv
• For standard cabinet widths • Corner connector, zinc die-cast with aluminium finish
• Satin • Profiled retainer, length 1042 mm, aluminium silver anodised
• Front connectors and screws
Cabinet width Order no. PU
mm
300 9 079 362 1
400 9 079 366 1
450 9 079 372 1
500 9 079 374 1
550 9 079 376 1
600 9 079 378 1
800 9 079 385 1
900 9 079 387 1
1000 9 079 388 1 Order no. PU
1200 9 079 389 1 9 079 329 1
Technical information see page 5.2.116
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel
for Quadro/
minimum ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
For further 181 144 187 144 192 144 179 144
details see page
5.2.66 - 5.2.70
12 12 12
9,5 9,5 9,5 9,5
36 16 42 16 47 16 34,5 16
12
min. 2
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 18 19
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
/ /
Screw-on 9 002 503 1000 620 9 068 247 9 068 328 180
! 260
300
350
420
9 020 077
9 021 302
9 011 007
9 005 407
1 set
50 sets
50 sets
50 sets
9 009 923
9 081 870
9 009 924
9 008 752
40
50
50
100
mm
300
400
450
PU 1
0 041 756
0 041 760
9 079 327
PU 20
9 025 989
9 025 990
9 025 993
470 9 004 087 50 sets 9 008 753 100 500 0 041 770 9 025 995
520 9 005 411 50 sets 9 008 754 100 600 0 041 780 9 025 997
620 9 006 455 1 set 9 009 926 40 800 0 041 782 9 047 870
900 0 041 790 9 025 998
TopSide for pot-and-pan drawer, height 176 mm 1000 0 041 793 9 025 999
• Translucent plastic 1200 9 079 328 9 026 001
Nominal length mm Order no. PU Lengthwise railing for internal pot-and-pan drawer Basic
260 9 080 599 40 • Powder-coated steel, silver
300 9 080 600 50 Nominal length mm Order no. PU
350 9 080 601 50 350 1 073 718 80
420 9 080 602 100 420 1 063 796 80
470 9 080 603 100 470 1 063 797 80
520 9 080 604 100 520 1 063 798 80
620 9 080 605 40 620 9 023 000 80
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40 Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
24 Wooden rear panel for Cabinet width mm Order no. PU 25 Corner connectors for
standard cabinet widths wooden rear panel
275 0 042 734 1
• Beech lacquered • Beech lacquered
300 0 042 736 1
400 0 042 737 1 Order no. PU
450 0 042 738 1 0 045 597 1 set
500 0 042 739 1
550 0 042 741 1 26 Wooden rear panel
600 0 042 742 1 • Custom length
• Length 1038 mm
800 0 042 743 1
• Beech lacquered
900 0 042 744 1
1000 0 042 745 1 Order no. PU
Technical information see page 5.2.116 1200 0 042 746 1 9 080 221 1
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation 70 70 70 70
height 97 103 12 108 94
12 12
For further 9,5 9,5 9,5 9,5
details see page 36 16 42 16 47 16 33 16
5.2.66 - 5.2.70 12
32 32 32 32
4,5 4,5 4,5 4,5
14 14 14 14
40,5 16 46,5 16 16 37,5 16
51,5
KD EB KD EB KD EB
KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
2x
ø15x12,2 24
D ø3,5x12
14
16
A 10 32 60 60 16
B
21 ø6x18
LB 14
LB = inside cabinet width
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
148,5 148,5 148,5 148,5
For further 183 188
177 174
details see page
5.2.66 - 5.2.70 12 12 12
9,5 9,5 9,5 9,5
36 16 42 16 47 16 33 16
12
96
96 96 96
4,5 32 32 4,5 32 32
4,5 4,5
14 14 14 14
40,5 16 46,5 16 16 37,5 16
51,5
KD EB KD EB KDEB
KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
LB 64 16
LB = inside cabinet width 16
NL = nominal length 21
LT = min. interior cabinet depth, depending on the Quadro used 10,5
Intermat 9956
min. 50 see page 3.1.24 - 3.1.27
Note:
min. 50 The door must be without
any door protrusion!
h
Pus
5.2.70 5.2.71
Nominal Min. cabinet depth mm Hole Order no. Order no. Order no.
length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5
mm p. & p. drawer p. & p. drawer b1 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets
260 279 288 160 0 045 298 9 079 636 0 045 304 9 079 654 0 045 309 9 079 668
300 315 324 160 9 079 229 9 079 638 9 079 230 9 079 656 9 079 231 9 079 670
350 365 374 160 0 045 299 9 079 640 0 045 305 9 079 659 0 045 310 9 079 671
420 435 444 224 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672
470 485 494 256 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673
520 535 544 256 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675
Drawer/pot-and-pan drawer
Cabinet front edge
9 32 9 32
Internal drawer/internal
pot-and-pan drawer
12
Cabinet front edge 36
37
9 32 37 b1
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
16 23 18 21 19 20
Nominal Min. cabinet depth mm Hole Order no. Order no. Order no.
length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5
mm p. & p. drawer p. & p. drawer b1 PU 1 set PU 16 sets PU 1 set PU 16 sets PU 1 set PU 16 sets
260 279 288 160 0 072 911 9 079 677 0 072 998 9 079 683 0 073 273 9 079 689
350 365 374 160 0 078 505 9 079 678 0 079 002 9 079 684 0 079 003 9 079 690
420 435 444 224 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691
470 485 494 256 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692
520 535 544 256 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693
Drawer/pot-and-pan drawer
Cabinet front edge
37
9 32 Cabinet front edge
Nominal length
ø4 ø6,3
Usable inside length
Internal drawer/internal 9 32 9 32
pot-and-pan drawer
Cabinet front edge 12
36
37
9 32
37 b1
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
16 23 18 21 19 20
Nominal Min. cabinet depth mm Hole Order no. Order no. Order no.
length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5
mm p. & p. drawer p. & p. drawer b1 b2 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets
300 315 324 160 – 9 079 070 9 079 694 9 079 077 9 079 049 9 079 081 9 079 059
350 365 374 192 – 9 079 074 9 079 697 9 079 079 9 079 054 9 079 083 9 079 061
420 435 444 224 – 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062
470 485 494 256 – 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065
520 535 544 256 – 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067
620 635 644 352 64 0 040 269 9 079 044 0 040 270 9 079 058 0 040 271 9 079 068
Drawer/pot-and-pan drawer
Cabinet front edge
9 32 9 32
Internal drawer/internal
pot-and-pan drawer 12
42
37 37 b1 b2
9 32
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
16 23 18 21 19 20
Drawer/pot-and-pan drawer
Cabinet front edge
Cabinet front edge
37 Nominal length
9 32
Usable inside length
ø4 ø6,3
9 32 9 32
12
Internal drawer/
internal pot-and-pan drawer 47
12
37 b1 b2
37
9 32
Min. cabinet depth
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
16 23 18 21 19 20
Drawer/pot-and-pan drawer
Cabinet front edge
Cabinet front edge
37
9 32 Nominal length ø4 ø6,3
9 9
Internal drawer/
internal pot-and-pan drawer
33
37 EL
9 32 37 b1
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
16 23 18 21 19 20
o-O p en
P2O (Push-To-Open) for Quadro drawer slides
-T
Pus
h
with integrated self-closing function
Set contains:
P2O-mechanical
Screw-on panel plate
ø3
Order no. PU
9 079 606 1 set
ø3 ø3
13
14,5
42,5 19 42,5 19
85 41,5 85
0 - 3 mm
adjustable
Mounting examples
Set contains:
2 racks, plastic
1 shaft for cutting to length to fit cabinet
widths up to 1200 mm, aluminium
2 cogwheels, plastic
2 supports, plastic
2 rod bearings, plastic
Nominal length
+ 33,5
Set contains:
1 locking head (only required in conjunction
with Stop Control Plus locking bar)
5 housings with pre-mounted glide
5 activators
5 activator holders
Order no. PU
0 048 326 1 set
26,4 16 min. 75 mm
for upper
drawers
40 fitting space
ø5
• for drawer/pot-and-pan drawer = nominal length + 14,5
• for internal drawer/internal pot-and-pan drawer = nominal length + 23,5
20,6
12,5 46
min. inside cabinet depth
• for drawer/pot-and-pan drawer = nominal length + 56
• for internal drawer/internal pot-and-pan drawer = nominal length + 65
Set contains:
1 pc connecting fitting VB 36, nickel-plated zinc die-cast
1 pc ball pin
Order no. PU
0 040 067 1 set
9,5+0,5
10 20
32
12
16
10,5 12,5 8
Front angle
• For stabilising wide and/or high fronts
• Reinforces the connection between drawer/
pot-and-pan drawer bottom and front panel
• For mounting below the drawer/pot-and-pan drawer
bottom panel after adjusting the front
Set contains:
1 pc front angle, chromated steel
3 pcs special screw ø 5 x 14 mm
1 pc pan-head screws ø 4,0 x 12 mm
Order no. PU
9 079 232 1 set
14
13,5
40
16 12
20
40
Stop attachment
• For 5 mm hole diameter
• Transparent plastic
ø8
Stop attachment ø8
• For 6 mm hole diameter
7
• Plastic 1,5
ø6
Stop attachment
• ø 8 mm, self-adhesive
• Transparent plastic
Order no. PU
0 072 120 50
0 046 695 1000
OrgaTray Basic
InnoTech designer-style profile/ cutlery/spice tray
designer cover cap Cutting board knife/spice rack
5.2.78 5.2.78 5.2.79 - 5.2.82
OrgaTray Exclusiv
cutlery/spice tray OrgaTray Deluxe InnoPlus
knife/spice rack cutlery/spice tray cutlery tray
5.2.90 - 5.2.91 5.2.92 - 5.2.93 5.2.94
TopSide
OrgaWing for pot-and-pan/internal pot-and-pan drawers Railing systems
5.2.95 5.2.96 - 5.2.97 5.2.98
OrgaStore Deluxe
glass jar/storage container organisation
OrgaStore Professional OrgaStore Exclusiv rail organizer
5.2.102 5.2.103 5.2.104 - 5.2.105
Set contains:
2 design-style profiles, plastic
2 designer-style cover caps, plastic
Cutting board
• Suitable for InnoTech drawers and pot-and-pan drawers
• Slides front to back
• Solid beech, oiled and steamed
246 10
10
488/538
20
• Universal application
• Easy to trim to size
• Knife and/or spice rack can be added, see page 5.2.81
• Environmentally friendly: made of fully recyclable polystyrene
• Antistatic, easy to clean
• Surface finish: silver
Partitioning
Depth
380
-
440
Depth
441
-
* *
520
Depth
380
-
440
Depth
441
-
* * * * * * * * * * *
520
Depth
581
-
620
* * * * * * * * * * *
Partitioning
Depth For cabinet width Width Order no. PU
441 * * * mm mm
-
520 789 - 938 701 - 850 9 061 547 1
Width 701 - 850 1101 - 1150 1189 - 1238 1101 - 1150 9 061 546 1
55 Trimmed depth
• For drawer/internal drawer Exclusiv = nominal length - 7,7
• For internal drawer Basic = nominal length - 24
170
60
ø50 ø48
Spice rack, lying flat 9 079 207 1 With acrylic lid 0 080 857 1
(spices not included) Spice shaker/mill 9 079 347 1
Trimmed width
Partitioning
Depth
441
-
520
23
EB
Inside cabinet width
Anti-slip mat
• 5 m roll
• Polystyrene rubber, nobbed
Partitioning
• Universal application
• Easy to trim to size
• Dividers, knife and/or spice rack can be added, see page 5.2.85
• Environmentally friendly: made of fully recyclable polystyrene
• Antistatic, easy to clean
• Surface finish: silver
** **
Depth 441 * *
23
-
520
60
**
Depth 581
-
620
*
Width 175 201 251 301 351 401 451 501
EB Inside cabinet width - - - - - - - -
200 250 300 350 400 450 500 550
60
Article Material Order no. PU ø50
• Universal application
• Easy to trim to size
• Knife and/or spice rack can be added,
see page 5.2.87
• Environmentally friendly: made of fully recyclable polystyrene
• Antistatic, easy to clean
• Surface finish: anthracite
Depth 380
-
440
201
-
*
250
Depth 441
23 -
55
520
*
Depth 581
-
620
Width 175 201 251 301 351 401 451 501
EB - - - - - - - -
Inside cabinet width 200 250 300 350 400 450 500 550
* * ** **
!
Depth 441
-
520
60
ø50
• Universal application
• Easy to trim to size
• Knife and/or spice rack can be added,
see page 5.2.89
• Environmentally friendly: made of fully recyclable polystyrene
• Antistatic, easy to clean
• Surface stainless steel finish
Depth 380
-
440
201
-
*
250
23 Depth 441
55 -
520
Depth
*
581
-
620
EB
Width 175 201 251 301 351 401 451 501
Inside cabinet width - - - - - - - -
200 250 300 350 400 450 500 550
* * ** **
!
Depth 441
-
520
60
ø50
Cutlery tray Spice tray Cutlery tray Cutlery tray Universal tray Spice tray Cutlery tray Universal tray Spice tray
400 200 500 600 100 400 500 200 400
Cutlery tray Universal tray Cutlery tray Cutlery tray Universal tray Spice tray
600 100 600 600 100 600
170
60
ø50 ø48
Set contains:
6 stainless-steel profiles
2 side rails, beech lacquered
Dividing elements, beech lacquered
Partitioning
Set contains:
4 stainless-steel profiles
2 side rails, beech lacquered
2 cross-rails, beech lacquered
2 spice racks, beech lacquered
2 longitudinal dividers, beech lacquered
10 spice jars, stainless steel
Dividing elements, beech lacquered
Partitioning
Width
For cabinet width
470
550
520
600
720
800 !
Nominal length Depth
470 462
520 512
620 612
Assembly
50
Secured with
2 wooden strips*
Set contains:
2 pop-out compartments, plastic silver
2 turning mechanisms, right/left
2 lateral guide rollers
2 support rollers
2 end stops
Order no. PU
0 049 084 1 set
32 8
230
144
187
470
252
Set contains:
2 front pieces left/right
2 rear elements left/right
Nominal length - 28
Anti-slip mat
• 5 m roll
• Polystyrene rubber, nobbed
Add-on set,
A Inside cabinet width - 2 x EB - 63 A
lengthwise railing
• The 70 mm height drawer set – 9
6,5
see page 5.2.22 - 5.2.23 - can be 12,5
14 ø10x12,5 14
turned into a variable-width 32
pot-and-pan drawer with
wooden rear panel using the
add-on lengthwise railing set
• Any rear panel height and 2x
ø3,5 X-
number of railings can be X 52,5
selected to meet personal needs
Set contains:
1 set lengthwise railing with
adapter for wooden rear panel
2 front connectors for lengthwise 2x
ø3,5x12
railings, white plastic
A
Add-on set, 2nd railing level
• A 2nd railing level can be added quickly
and easily to pot-and-pan drawers
• Crosswise railing must be ordered
separately, see below 64
Set contains:
1 set of corner posts, grey plastic
2 lengthwise railings,
powder-coated steel, silver
2 front connectors for lengthwise railings,
white plastic see pot-and-
pan drawer
height 144 or
height 176 mm
*
Set contains:
2 fascia profiles left/right
Perforated profiles
OrgaFlags with pre-mounted threaded pin
158 146
12
Crosswise railing
• For pot-and-pan and internal pot-and-pan drawers
• Custom length
• Length 1140 mm
• Powder-coated steel, silver
Set contains:
1 crosswise railing, powder-coated steel, silver
2 mounts for crosswise railing, grey plastic
Organisation elements, grey plastic
! 800
900
1000 10
8
9
9 005 269
9 005 270
9 005 271
1 set
1 set
1 set
Order no.
0 013 292
PU
1 set
Set contains:
1 aluminium partition
Organisation elements, grey plastic
Support pieces, black plastic
Set contains:
1 set glass holder, silver-grey plastic
1 set TopSide, powder-coated steel, silver
6 glass jars with blue lid
2 aluminium partitions
Dividing elements, grey plastic
166
EB
Inside cabinet width EB
190 175
15
Order no. PU
0 046 171 1
Trimmed width
Trimmed width = inside cabinet width - 2 x EB - 48
Trimmed depth =
15
8 • For pot-and-pan drawer/internal pot-and-pan drawer Exclusiv
= nominal length - 7,7
8 • For internal pot-and-pan drawer Basic = nominal length - 24
Order no. PU
0 046 172 1/ 6
0 046 173 1/12
Set contains:
4 stainless steel profiles
2 cross-rails, beech lacquered
2 longitudinal dividers, beech lacquered
2 side rails, beech lacquered
Dividing elements, beech lacquered
Divider for organising glass jars/
storage containers,
beech lacquered
Cabinet width Number of Number of dividers for organising Order no./nominal length mm PU
mm dividing elements glass jars/storage containers 470 520 620
600 3 3 0 046 438 0 046 444 0 046 672 1 set
800 5 6 0 046 439 0 046 445 0 046 673 1 set
900 5 6 0 046 441 0 046 446 0 046 674 1 set
1000 7 6 0 046 442 0 046 447 0 046 675 1 set
1200 7 6 0 046 443 0 046 448 0 046 676 1 set
Partitioning
Order no. PU
ø120
9 079 533 1
Set contains:
2 side rails, beech
2 dividers, beech
3 railings for dividers, stainless steel
Organiser system OrgaStore Deluxe 3 for pot-and-pan drawers, height 176 mm Additional divider
for OrgaStore Deluxe 3
Cabinet width Order no./nominal length mm PU
mm 470 520 620 • Beech lacquered
Front connectors
• White plastic
Order no. PU
9 053 342 1
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
installation ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
height
For further
details see page 204 144 210 144 215 144 201 144
5.2.66 - 5.2.70
12 12 12
9,5 9,5 9,5 9,5
36 16 16 16 33 16
42 47
12
96 96 96
96
32 32 32
32 4,5 4,5
4,5 4,5
14 14 14
14
40,5 46,5 16 51,5 16 37,5 16
16
KD EB KD EB
KD EB KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
160
250
165
110
180
80 166
32
32 Preassembled drawer
for sink cabinets
Order no. PU
0 043 006 1
Cut-out railing for under-sink drawer The following components are all you need for assembling
• For utilising the space below the sink an InnoTech drawer for sink cabinets:
33 Cut-out railing for under-sink drawer
• For customised drawer widths
+ Pot-and-pan drawer set, height 144 mm see pages 5.2.26 - 5.2.27
+ Front connectors with expanding dowel or to screw-on
+ Aluminium rear panel see pages 5.2.26 - 5.2.27
or Wooden rear panel, 16 mm
+ Quadro drawer slides see page 5.2.65
+ Bottom panel, 16 mm
33
Order no. PU
0 040 119 1 Cut sizes for the drawer base see page 5.2.109
Front connectors
• White plastic
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation
height
144 144 144 144
For further 177 183 188 174
details see page
5.2.66 - 5.2.70
12 9,5 12 9,5 12 9,5 9,5
36 16 42 16 47 16 33 16
12
96
96 96 96
KD EB KD EB KD EB
KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
9
Size Wooden rear panel Aluminium rear panel 44
A Bottom panel depth NL + 10 NL - 3
B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 10
Front connectors
• White plastic
A
3x ø10x12,5
min. 515
96
144
min. 227
505 4,5 32
12 9,5
16 41,5
55,5
46
min. 86 KD EB EB 32
min. 90,5
ø50
80
35
Front connectors
• White plastic
A 3x ø10x12,5
Quadro V6+ Silent System = min. 485
Quadro V8 Silent System = min. 505
Nominal length 470 96 600 = 417
800 = 614
314 141 900 = 714
141
4,5 32
14
T 116 min.T 47
(min. 47)
20 KDEB
13 188
ø5x13 98 - T
6
Leveller 600 = 567
25-85 min. 125 see group 8 800 = 767
900 = 867
36 Preassembled drawer, height 54 mm
contains:
36
1 pcs drawer, powder-coated steel, silver, 3-sided,
preassembled, complete with silver-grey drawer bottom panel
2 pcs cover caps with Hettich logo
Order no. PU
0 077 941 1
Cover caps with customised imprint available on request
Drawer set, height 54 mm The following components are all you need for assembling
a customised InnoTech under-oven drawer:
contains:
1 set drawer profiles, powder-coated steel Drawer set, height 54 mm
1 set back panel connectors, powder-coated steel + Front connectors with expanding dowel or to screw-on
2 pcs cover caps with Hettich logo + Quadro drawer slides see page 5.2.65
Pan-head screws ø 3,5 x 12 mm + Bottom and rear panel, 16 mm
Front connectors
• White plastic
A B
Assembly Order no. PU
A With expanding dowel 0 077 911 1/40
Fixing with countersunk
B Screw-on 0 077 910 1/40 chipboard screw ø 3,5 mm
Quadro V6 Silent System/ Quadro V6+ Silent System Quadro V8 Silent System Quadro 30
Quadro V6 • Full-extension • Full-extension • Part-extension
• Full-extension • Load capacity 50 kg • Load capacity 70 kg • Load capacity 30 kg
• Load capacity 30 kg
Hole positions
for Quadro/
minimum
ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3
installation 54 54 54 54
81 12 12 12 78
height 87 92
9,5 9,5 9,5 9,5
For further 36 16 42 16 47 16 33 16
details see page 12
5.2.66 - 5.2.70
ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12
KD EB KD EB KD EB KD EB
From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8
16 23 18 21 19 20
By varying the Quadro installation width (EB), 3 different cabinet side panel
thicknesses (KD) can be accommodated without changing the drawer
dimensions. The following dimensions apply (mm):
9
D 38
53
10
A
B
LB 2x
ø3,5x12
LB = inside cabinet width
NL = nominal length
LT = min. interior cabinet depth, depending on the Quadro used
Mounting application
4 600
Y
434 KS
60
1,5
383 92,5 / 142,5 4
T-10 T 14
3
min. 81 60
min. 499 20-70 467
443
256 37
32 9 32 9
14
26
10 32 320 32 23
ø4 ø6,3
Y 26,5
26,5
ø5 T - 10 32 32
min. 81
41,5
ø4 ø6,3
ø3,5x12
ø3,5x12
Drawer installation
ø3,5x12
Order no. PU
0 041 777 1
ø3,5
Fitting drawer
Remove drawer
Toolless
assembly
Toolless
disassembly
Toolless
height adjustment Side adjustment on
right-hand drawer
profile only
± 2 mm
± 1,5 mm
Tilt adjustment
ø3,5x40
2x
M3,5 x 8
4x
M3,5 x 19
= ca. 100-150
=
=
ø4
LB - 2 x EB -101
ø3,5 x 12
ø3,5
ø 2,5
Drilling jig
40
22,5
EB 9,5=14,6
EB 10,5=14,6
EB 12,5=12,6
ø3,5x16
Anti-tilt assembly
26,4
ø5
20,6
12,5
MultiTech
MultiTech MultiTech Railing set for pot-and-pan drawers/
Drawer profile height 150 mm Drawer profile height 214 mm Cabinet side view and hole positions
5.3.10 - 5.3.11 5.3.12 - 5.3.13 5.3.14 - 5.3.15
MultiTech
Hanging file frame set/ MultiTech MultiTech Technical information/
Accessories for central lock Accessories Assembly aid MultiFit Pro
5.3.16 - 5.3.17 5.3.18 - 5.3.19 5.3.20 - 5.3.24
Drawer profile
Full range – with drawer
profile heights of 54, 86, 118,
150 and 214 mm, the variable
drawer system ensures a large
variety of uses. Depths
ranging from 250 to 550 mm
ensure perfect variability.
Drawer runner
• Roller runner with partial or over-extension
• Load capacity: 25 kg with partial-extension
30 kg with over-extension
• With integrated self-closing effect and double stop
• With captive guide rail on one side and
automatic tolerance compensation
Front connectors
A B
• Nickel-plated zinc die-cast
Hole position
Roller runner/minimum installation height
Part-extension
For further details see page 5.3.15
ø3,5 ø6,3
Fixing screws
min. 24
Dimensions mm Order no. PU
78 39 ø 6,3 x 10,5 0 051 264 200
49
ø 6,3 x 14 0 051 265 200
16
min. 5 ø 3,5 x 12 9 079 791 200
ø 3,5 x 16 0 071 925 200
ø 4,0 x 12 0 058 243 200
ø4x12
2x
ø2,5 9 ø4x12
ø10x12,5
12
32 18,5
8,5
8,5
Dimensions
LB = inside cabinet width
LT
NL = nominal length
NL
NH = nominal height, 54 mm
C
Size Drawer
A Shelf depth NL - 3
D
B Shelf width LB - 32
NH
C Rear panel width LB - 32
61 A D Rear panel height 39
B
LT Inside cabinet depth min. NL + 5
LB
Front connectors
A B C
• Nickel-plated steel
Assembly Order no. PU
A Press-in 0 054 998 1/20
B Screw on 0 054 997 1/20
C With expanding sockets 0 051 477 1/20
Hole position
Roller runner/minimum installation height
Part-extension Over-extension
min. 24
min. 56
Fixing screws
110 71 110 71 Dimensions mm Order no. PU
81
ø 6,3 x 10,5 0 051 264 200
49
ø 6,3 x 14 0 051 265 200
16 16
min. 5 min. 5 ø 3,5 x 12 9 079 791 200
ø 3,5 x 16 0 071 925 200
ø 4,0 x 12 0 058 243 200
ø4x12 ø4x12
ø2,5
ø10x12,5 9
9 2x
ø4x12
2x
32
64 ø3,5x12 18 71
18,5
34,5
8,5
8,5
Dimensions
LB = inside cabinet width
LT NL = nominal length
NL NH = nominal height, 86 mm
C
Size Drawer Internal drawer
A Shelf depth NL - 3 NL - 19
D
E B Shelf width LB - 32 LB - 32
NH
C Rear panel width LB - 32 LB - 32
61 A D Rear panel height 71 71
F B
E Front panel - LB - 58
LB F Front height - 71
LT Inside cabinet depth min. NL + 5 min. NL + 14
Front connectors
A B C
• Nickel-plated steel
Assembly Order no. PU
A Press-in 0 054 998 1/20
B Screw on 0 054 997 1/20
C With expanding sockets 0 051 477 1/20
Hole position
Roller runner/minimum installation height
Part-extension Over-extension
min. 24
min. 56
ø2,5
ø10x12,5 9
9 2x
ø4x12
2x
64 ø3,5x12
64
48 103
40,5 18,5
34,5
8,5
Dimensions
LB = inside cabinet width
LT NL = nominal length
NL NH = nominal height, 118 mm
C
Size Drawer Internal drawer
A Shelf depth NL - 3 NL - 19
E D
B Shelf width LB - 32 LB - 32
NH
C Rear panel width LB - 32 LB - 32
D Rear panel height 103 103
F A
B E Front panel - LB - 58
F Front height - 103
LB
LT Inside cabinet depth min. NL + 5 min. NL + 14
Front connectors
A B C
• Nickel-plated steel
Assembly Order no. PU
A Press-in 0 054 998 1/20
B Screw on 0 054 997 1/20
C With expanding sockets 0 051 477 1/20
Hole position
Roller runner/minimum installation height
Part-extension Over-extension
For further details see page 5.3.15
ø3,5 ø6,3
ø3,5 ø6,3
min. 24
min. 56
174 174
135 135
145
Fixing screws
113
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
16 16 ø 3,5 x 12 9 079 791 200
min. 5 min. 5
ø 3,5 x 16 0 071 925 200
ø 4,0 x 12 0 058 243 200
ø4x12 ø4x12
ø2,5
ø10x12,5 9
9 2x
ø4x12
2x
64 ø3,5x12
64
135 96
72,5
52,5
18,5
8,5
Dimensions
LT LB = inside cabinet width
NL NL = nominal length
C NH = nominal height, 150 mm
Size Drawer Internal drawer
A Shelf depth NL - 3 NL - 19
E D B Shelf width LB - 32 LB - 32
NH
C Rear panel width LB - 32 LB - 32
D Rear panel height 135 135
F A E Front panel - LB - 58
B
F Front height - 135
Processing technology LB
see group 2 LT Inside cabinet depth min. NL + 5 min. NL + 14
Front connectors
A B C
• Nickel-plated steel
Assembly Order no. PU
A Press-in 0 054 998 1/20
B Screw on 0 054 997 1/20
C With expanding sockets 0 051 477 1/20
grey 0 046 097 1/20 350 0 051 478 0 051 479 1/10 sets
Cover caps with customised imprint available on request 400 0 051 409 0 051 410 1/10 sets
450 0 051 411 0 051 412 1/10 sets
500 0 051 413 0 051 414 1/10 sets
550 0 051 415 0 051 416 1/10 sets
Technical information see page 5.3.20
Hole position
Roller runner/minimum installation height
Part-extension Over-extension
min. 24
min. 56
238 238
199 199
209
16 16
ø 3,5 x 12 9 079 791 200
min. 5 min. 5 ø 3,5 x 16 0 071 925 200
ø 4,0 x 12 0 058 243 200
ø4x12 ø4x12
NL
ø2,5 C
ø10x12 9
3x
ø4x12
D
64
64
NH
A
64 B
96
136,5
LB
ø 2,5
Size Drawer
18,5
A Shelf depth NL - 3
B Shelf width LB - 32
C Rear panel width LB - 32
D Rear panel height 199
8,5
LT Inside cabinet depth min. NL + 5
Processing technology see group 2
Railing set contains:
2 railing tubes, powder-coated steel
2 drawer front connections with expanding socket for railing bar
32
ø2,5
ø10x12,5
2x RW
Y ø4x12
Z
64
18,5
Order no. PU X
white grey
9 081 054 9 081 055 1/5
8,5
Mount for crosswise railing Drawer profile Size Size Size Size
• Plastic height mm RW mm X mm Y mm Z mm
Drawer
ø3,5 ø6,3
Cabinet front edge
Nominal length
37
9
Internal drawer
Cabinet front edge
EL 16
37 128 96 b1 b2
Over-extension
Cabinet front edge
Drawer
Cabinet front edge ø3,5 ø6,3
Nominal length
37
9
Internal drawer
16 15
Cabinet front edge 37 128 96 b1 b2
37
16,5 ø4
2x
9,5
ø3,5x16
32 56,2 L 32 R
14,2 9,5
26
32,5
2x
ø3,5x16
21
H
K
8,5 K + 32
H = rear panel height + panel thickness - 9,5 min. K = L - 2 x 16,5 + 2 x 26
Central lock
37 Lock 16
18,5 18,5
29
87 ø19
32
20
1000
G
19
ø7
Height Size G mm
mm Part-extension Over-extension
86 76,5 44,5
20 10
118 108,5 76,5
7 150 140,5 108,5
Cutlery tray
• Universal application for nominal lengths 450 and 500 mm
• Cutlery tray depth 433 - 483 mm
• White plastic, high-gloss laminate
Cutlery tray 50
81
16 ±1
Cutlery
tray depth
433 - 483 mm
Cutlery tray
Width 200 - 240 250 - 290 300 - 340 350 - 390 400 - 440 500 - 540
485 25
50
Stop attachment
• For 5 mm hole diameter
• Transparent plastic
ø8
Stop attachment ø8
• For 6 mm hole diameter
7
• Plastic 1,5
ø6
Stop attachment
• ø 8 mm, self-adhesive
• Transparent plastic
Order no. PU
0 072 120 50
0 046 695 1000
4x
ø4x12
4x
ø4x12
Order no. PU
9 079 392 1
Part-extension
Over-extension
ø10x12,5
4x
ø10x12,5
ø3,5
click 4x
ø3,5
click
Internal drawer
click
click
4x
ø3,5
45∞
Front adjustment
Height adjustment Side adjustment Tilt adjustment
± 1,5 m
click
2x
ø4,5x16
Roller runners
Range summary/Technical comparison 5.4.48
Load capacity 30 kg 30 kg 30 kg
Assembly to the cabinet side to the cabinet side to the cabinet side
Load capacity 50 kg 30 kg
Load capacity 25 kg 25 kg 40 kg
Assembly to the cabinet side to the cabinet side to the cabinet side
Accessories
Quadro V6 BM
Silent System Quadro 40 BM
o-O p en
h
Pus
bracket/
5.4.26 - 5.4.27 5.4.28 - 5.4.29 5.4.30 front panel fitting
5.4.30 - 5.4.31
• Slide-on assembly – simply place the drawer on the slides and push home
• Silent System – the integrated dampened closure mechanism lets drawers
close gently and quietly
• The integrated roll-out prevention stops accidental opening
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
• Flexibility through interchangeability – swap between Quadro partial and full-
extension slides without changing cabinet, drawer or front panel dimensions!
Nominal length/drawer length Hole spacing Min. cabinet depth Order no.
mm b1 mm mm PU 1 set PU 10 sets
280 160 293 0 045 284 9 080 224
300 192 313 0 045 285 9 080 225
320 192 333 0 045 286 9 080 226
350 192 363 0 045 287 9 080 231
380 224 393 0 045 288 9 080 232
400 224 413 0 045 289 9 080 233
420 224 433 0 045 290 9 080 234
450 256 463 0 045 291 9 080 235
480 256 493 0 045 292 9 080 236
500 288 513 0 045 293 9 080 237
520 288 533 0 045 294 9 080 238
550 288 563 0 045 295 9 080 239
580 352 593 0 045 296 9 080 240
600 352 613 0 045 297 9 080 241
Pull-out combination system for front and inside drawer see group 9.1
Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13
Solid wood drawer insert Variario see page 5.4.14 - 5.4.15
Processing technology see group 2
ø4 ø6,3 max.16 7
ø6
11
12 9,5
36 12-15
26,5
11
ø4 ø6,3
Nominal length
9 9
32 32
12
36
37 b1
Assembly Disassembly
• Slide-on assembly – simply place the drawer on the slides and push home
• Silent System – the integrated dampened closure mechanism lets drawers
close gently and quietly
• The integrated roll-out prevention stops accidental opening.
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
• Flexibility through interchangeability – swap between Quadro partial and full-
extension slides without changing cabinet, drawer or front panel dimensions!
Nominal length/slide length Hole spacing Min. cabinet depth Extension loss Order no.
mm b1 mm mm EL mm PU 1 set PU 12 sets
250 160 263 50 0 047 812 1 909 800
280 160 293 50 0 047 831 1 909 802
300 160 313 50 0 047 432 1 909 804
320 192 333 62 0 047 426 1 909 806
350 192 363 62 0 047 425 1 909 808
380 224 393 62 0 047 424 1 909 823
400 224 413 74 0 047 433 1 909 825
420 224 433 74 0 047 832 1 909 827
450 256 463 86 0 047 431 1 909 829
480 256 493 86 0 047 833 1 909 831
500 288 513 98 0 047 429 1 909 833
520 288 533 98 0 047 834 1 909 835
550 320 563 98 0 047 835 1 909 837
Pull-out combination system for front and inside drawer see group 9.1
Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13
Solid wood drawer insert Variario see page 5.4.14 - 5.4.15
Processing technology see group 2
max.16 7
ø4 ø6,3
ø6
11
12 9,5
12-15
34
24,5
10
ø6
Cabinet front edge
11
9 32 9 32
12
34
EL 16
37 b1
Assembly Disassembly
• Slide-on assembly – simply place the drawer on the slides and push home
• Stop Control – the integrated self-closing mechanism closes drawers reliably and
automatically and prevents them opening inadvertently
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
• Flexibility through interchangeability – swap between Quadro partial and full-
extension slides without changing cabinet, drawer or front panel dimensions!
Nominal length/slide length Hole spacing Min. cabinet depth Order no.
mm b1 mm mm PU 1 set PU 15 sets
280 160 293 0 072 164 9 080 246
300 192 313 0 072 172 9 080 247
320 192 333 0 072 165 9 080 248
350 192 363 0 072 173 9 080 249
380 224 393 0 072 166 9 080 250
400 224 413 0 072 174 9 080 251
420 224 433 0 072 167 9 080 252
450 256 463 0 072 175 9 080 253
480 256 493 0 072 168 9 080 254
500 288 513 0 072 176 9 080 255
520 288 533 0 072 169 9 080 256
550 288 563 0 072 177 9 080 257
580 352 593 0 072 170 9 080 258
600 352 613 0 072 178 9 080 259
Pull-out combination system for front and inside drawer see group 9.1
Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13
Solid wood drawer insert Variario see page 5.4.14 - 5.4.15
Processing technology see group 2
ø4 ø6,3 max.16 7
ø6
11
12 9,5
36 12-15
26,5
10 ø6
11
9 32 9 32
12
36
37 b1
Assembly Disassembly
• Slide-on assembly – simply place the drawer on the slides and push home
• Stop Control – the integrated self-closing mechanism closes drawers reliably and
automatically and prevents them opening inadvertently
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
• Flexibility through interchangeability – swap between Quadro partial and full-
extension slides without changing cabinet, drawer or front panel dimensions!
Nominal length/ Hole spacing Min. cabinet Extension Order no. PU Order no. PU
slide b1 mm depth mm loss EL mm
length mm
250 160 263 50 0 072 904 1 set 9 080 260 28 sets
280 160 293 50 0 048 901 1 set 9 080 261 19 sets
300 160 313 50 0 072 905 1 set 9 080 262 19 sets
320 192 333 62 0 048 902 1 set 9 080 263 19 sets
350 192 363 62 0 073 210 1 set 9 080 264 19 sets
380 224 393 62 0 048 903 1 set 9 080 265 19 sets
400 224 413 74 0 073 211 1 set 9 080 266 19 sets
420 224 433 74 0 033 686 1 set 9 080 267 19 sets
450 256 463 86 0 073 212 1 set 9 080 268 19 sets
480 256 493 86 0 047 481 1 set 9 080 269 19 sets
500 288 513 98 0 033 687 1 set 9 080 270 19 sets
520 288 533 98 0 047 482 1 set 9 080 271 19 sets
550 320 563 98 0 073 214 1 set 9 080 272 19 sets
580 352 593 110 0 048 904 1 set 9 080 273 19 sets
600 352 613 110 0 073 215 1 set 9 080 274 15 sets
650 384 663 134 0 073 216 1 set 9 080 275 15 sets
Pull-out combination system for front and inside drawer see group 9.1
Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13
Solid wood drawer insert Variario see page 5.4.14 - 5.4.15
Processing technology see group 2
ø4 ø6,3
max.16 7
ø6
11
12 9,5
33 12-15
23,5
Dimensions mm Order no. PU
6,3 x 10,5 0 051 264 200
6,3 x 14 0 051 265 200
4,0 x 16 0 010 085 200
EB
20 16
ø4 ø6,3
10 ø6
Nominal length
11
9 32 9 32
12
33
EL 16
37 b1
Min. cabinet depth
Assembly Disassembly
Cabinet side
Quadro 16
79 10
64
48
Mounting
with countersunk wood screws ø 3,5
6
7,5
Order no. PU
0 075 808 1/5 sets
13 10 32 7 12 10
26,5
37,4 Quadro
ø8 x 13
20
Chipboard
screw ø 3,5
47,5
C
A
B B
A
57 A
B
473 57 A
351 - 559
710 - 1126
473
418
208
Order no. PU
9 079 351 1
418
208
Order no. PU
9 079 350 1
440
208
Order no. PU
9 079 359 1
440
208
Order no. PU
9 079 354 1
440
Order no. PU 85
9 079 357 1
60
ø50
• Slide-on assembly – simply place the drawer on the slides and push home
• Silent System – the integrated dampened closure mechanism lets drawers
close gently and quietly
• The integrated roll-out prevention stops accidental opening
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
Nominal length/slide length Hole spacing mm Min. cabinet depth Order no.
mm b1 b2 mm PU 1 set PU 8 sets
300 160 - 315 9 079 070 9 079 694
350 192 - 365 9 079 074 9 079 697
420 224 - 435 0 048 354 9 079 698
470 256 - 485 0 048 355 9 079 699
520 256 - 535 0 048 356 9 079 032
620 352 64 635 0 040 269 9 079 044
Cabinet side
9
Drawer frame 8
Quadro 16
79 10
64
48
Mounting
with countersunk wood screws ø 3,5
6
7,5
8 7
ø4 ø6,3
ø6
11
9,5
12
12-15
42
31,5
10
ø6
Cabinet front edge
11
ø4 ø6,3
Nominal length
9 32 9 32
12
42
37 b1 b2
Assembly Disassembly
• Slide-on assembly – simply place the drawer on the slides and push home
• Silent System – the integrated dampened closure mechanism lets drawers
close gently and quietly
• The integrated roll-out prevention stops accidental opening.
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
Nominal length/slide length Hole spacing Min. cabinet depth Order no.
mm b1 mm mm PU 1 set PU 10 sets
260 160 279 0 045 298 9 079 636
300 160 315 9 079 229 9 079 638
350 160 365 0 045 299 9 079 640
420 224 435 0 045 301 9 079 641
470 256 485 0 045 302 9 079 643
520 256 535 0 045 303 9 079 652
Cabinet side
9
Drawer frame 8
Quadro 16
79 10
64
48
Mounting
with countersunk wood screws ø 3,5
6
7,5
8 7
ø4 ø6,3
ø6
11
9,5
12
36 12-15
26,5
11
ø4 ø6,3
Nominal length
9 9
32 32
12
36
37 b1
Assembly Disassembly
• Plug-on assembly – simply place the drawer on the locating pins and slides
• Silent System – the integrated dampened closure mechanism lets drawers
close gently and quietly
• The integrated roll-out prevention stops accidental opening
• Integrated height adjustment up to + 3 mm
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
Nominal length/slide length Hole spacing mm Min. cabinet depth Extension loss Order no.
mm b1 C mm EL mm PU 1 set PU 12 sets
250 160 188,5 263 50 9 080 276 0 043 645
300 160 188,5 313 50 9 080 277 0 043 646
320 192 221,5 333 62 9 080 278 0 043 647
350 192 221,5 363 62 9 080 279 0 043 648
380 224 249,5 393 62 9 080 280 0 043 649
400 224 249,5 413 74 9 080 281 0 043 651
450 256 283,5 463 86 9 080 282 0 043 652
500 288 309,5 513 98 9 080 283 0 043 654
550 320 338,5 563 98 9 080 284 0 043 655
Push-on holder
• For drawers with flush bottom and pull-out shelves
• Plastic
ø6 10
10 13
ø4 ø6,3 ø4 ø6,3
max.16 7 20 26,5 8
ø6
ø6
11 C C
12 9,5 8
34 10
24,5
ø6 x 10
6
EB EB
20 25 20
10
ø6
Cabinet front edge
11
9 32 9 32
12
34
EL 16
37 b1
Min. cabinet depth
Assembly
Grooved bottom panel Flush bottom panel
• Plug-on assembly – simply place the drawer on the locating pins and slides
• Stop Control – the integrated self-closing mechanism closes drawers reliably and
automatically and prevents them opening inadvertently
• Integrated height adjustment + 3 mm
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
Nominal length/slide length Hole spacing mm Min. cabinet depth Extension loss Order no. PU
mm b1 C mm EL mm
250 160 188,5 263 50 0 072 154 1/18 sets
300 160 188,5 313 50 0 046 364 1/18 sets
350 192 221,5 363 62 0 046 365 1/18 sets
400 224 249,5 413 74 0 046 366 1/18 sets
450 256 283,5 463 86 0 046 367 1/18 sets
500 288 309,5 513 98 0 046 368 1/18 sets
550 320 338,5 563 98 0 046 369 1/18 sets
600 352 370,5 613 110 0 046 370 1/18 sets
650 384 400,0 663 122 0 046 371 1/18 sets
700 416 430,0 713 134 0 046 372 1/18 sets
Push-on holder
• For drawers with flush bottom and pull-out shelves
• Plastic
ø6 10
10 13
ø4 ø6,3 ø4 ø6,3
max.16 7 20 26,5 8
ø6
ø6
11 C C
12 9,5 8
33 10
23,5
ø6 x 10
6
EB EB
20 16 20
10
ø6
Nominal length ø4 ø6,3
11
C
9 32 9 32
12
33
EL 16
37 b1
Min. cabinet depth
Assembly
Grooved bottom panel Flush bottom panel
• Plug-on assembly – simply place the drawer on the locating pins and slides
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
• With roll-out prevention and bumpers – one roll-out prevention
(order number 0 064 338) and two bumpers are enclosed per set
Drawer length Hole spacing mm Min. cabinet depth Over-extension Order no. PU
mm b1 C mm OE mm
280 - 400 192 249,5 293 - 413 28 0 047 213 1/12 sets
350 - 500 256 309,5 363 - 513 29 0 047 214 1/12 sets
470 - 700 352 430,0 483 - 713 25 0 047 215 1/12 sets
Push-on holder
• For drawers with flush bottom and pull-out shelves
• Plastic
ø6 11
8
7,5 10
C C
29 36,5
6 ø6 x 10
EB EB
20 16 20
Drawer length
ø4 ø6,3
C
10 ø6
11
Rubber bumper
9 23 9 32
29
OE 37 b1
Min. cabinet depth
Assembly
Nominal length/Drawer length Hole spacing Min. cabinet depth Order no. PU
mm mm mm
350 256 363 9 079 486 1 set
400 288 413 9 079 523 1 set
450 256 463 9 079 437 1 set
500 256 513 9 079 454 1 set
Order no. PU
0 075 808 1/5 sets
max.16 7
ø6
11
12-15
24 28
22,5
EB Dimensions mm Order no. PU
20 28
ø4 4,0 x 16 0 010 085 200
11
ø4
Nominal length
9 9 9 9
37 b1
Assembly Disassembly
• Plug-on assembly – simply place the drawer on the locating pins and slides
• Perfect vertical and lateral stability. The robust, resilient tracks ensure
optimal slide action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks
• Integrated height adjustment + 3 mm
• With roll-out guard – one roll-out guard is included in each set
(order no. 0 064 338)
Drawer length Hole spacing mm Min. cabinet depth Extension loss Order no. PU
mm b1 C mm EL mm
270 - 395 192 249,5 283 - 408 75 0 066 079 1 set
330 - 490 256 309,5 343 - 503 99 0 066 075 1 set
455 - 680 384 430,0 468 - 693 147 0 066 065 1 set
Push-on holder
• For drawers with flush bottom and pull-out shelves
• Plastic
ø6 x 10 12
6
16 27,5
27,5 47
47
ø4
Drawer length
10 ø6
C
11
32 32
EL 16
37 b1
Min. cabinet depth
Assembly
o-O p en
P2O (Push-To-Open) for Quadro drawer slides
-T
with integrated self-closing function Pus
h
Set contains:
P2O-mechanical
Screw-on panel plate
ø3
Order no. PU
9 079 606 1 set
ø3 ø3
13
14,5
42,5 19 42,5 19
adjustable 85 41,5 85
00 - 33 mm
mm
Mounting examples
7
1,5
ø8 ø6
Order no. PU
0 072 120 50 Order no. PU
0 046 695 1000 0 079 438 1/200
10
ø20
Load capacity 10 kg 12 kg 20 kg
Groove measurement 17 mm 27 mm 27 mm
Ball bearing slide systems for 12,7 mm installed width, mounted on sides
KA 3432 KA 5332 KA 5632 SC
Page number 5.4.37 5.4.38 5.4.39
Load capacity 34 kg 30 kg 40 kg
Ball bearing slide systems for 12,7 mm installed width, mounted on sides
KA 5632 KA 4932
Page number 5.4.40 5.4.41
Load capacity 45 kg 60 kg
Ball bearing slide systems for 12,7 mm installed width with screw-on assembly
KA 5632 AM KA 4932 AM
Page number 5.4.42 5.4.43
Load capacity 45 kg 60 kg
Accessories
Stop attachment/
bracket/front panel fitting
Page number 5.4.47
Nominal Drawer Extension Hole spacing Cabinet Drawer slide Order no. PU
length mm length loss mm rail mm
mm EL mm b1 C mm
200 155 - 210 32 96 101 150 133 0 079 054 1/20 sets
250 185 - 260 44 128 132 182 164 0 079 055 1/20 sets
300 185 - 305 44 128 153 182 185 0 030 765 1/20 sets
330 220 - 340 56 160 178 214 210 0 066 933 1/20 sets
!
350 220 - 355 56 160 185 214 217 0 071 835 1/20 sets
380 250 - 390 68 192 209 246 241 0 071 836 1/20 sets
400 250 - 410 68 192 217 246 249 0 030 766 1/20 sets
Front support from 430 mm
430 430 86 224 398 278 430 0 079 056 1/20 sets
450 450 86 224 418 278 450 0 030 767 1/20 sets
480 480 98 256 448 310 480 0 079 057 1/20 sets
500 500 98 256 468 310 500 0 030 768 1/20 sets
550 550 110 288 518 342 550 0 030 769 1/20 sets
2 M4 x 9 screws are included in every set
Cabinet front edge max. 13
10
6-7 M4x9
32 9 32
M4
EL 16
37 b1
ø3,5 ø6,3
Fixing screws
32 9 32
M4
EL 16
37 b1
Min. cabinet depth = Drawer length + 1
ø3,5 ø6,3 • = minimum number of screw-fixing positions
Assembly
Fixing screws
Nominal Drawer Over-extension Hole spacing Cabinet rail Drawer Order no. PU
length mm length OE mm mm mm slide mm
mm b1 C
310 200 - 310 24 192 165 246 197 0 026 561 1/5 sets
450 310 - 450 24 256 271 310 303 0 026 562 1/5 sets
550 450 - 550 40 256 296 310 328 0 026 578 1/5 sets
2 M4 x 9 screws are included in every set
M4 OE 37 b1
M4x9
13,5
27
13,5
6-7
20 Assembly
ø3,5 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
ø 3,5 x 12 9 079 791 200
ø 3,5 x 16 0 071 925 200
M4 x 9 0 079 527 200
EL 16
12,7 37 128 b1 b2 b3
Min. cabinet depth
17,5
• = minimum number of screw-fixing positions
35
17,5 ø4
Assembly
ø4 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
ø 4,0 x 16 0 010 085 200
ø4 ø6,3
Drawer length
37 C
Fix to drawer
with at least
8 screws
37 128 96 b1 b2 b3 b4
Min. cabinet depth
• = minimum number of screw-fixing positions
12,7
23 Assembly
46
23 ø4
ø4 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
ø 4,0 x 16 0 010 085 200
ø4 ø6,3
Drawer length
37 C
Fix to drawer
with at least
8 screws
37 128 96 b1 b2 b3 b4
12,7 Min. cabinet depth
• = minimum number of screw-fixing positions
23
46
23 ø4 Assembly
ø4 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
ø 4,0 x 16 0 010 085 200
ø4 ø6,3
Drawer length
37 C
Fix to drawer
with at least
8 screws
37 128 b1 b2 b3 b4 b5
12,7 Min. cabinet depth
• = minimum number of screw-fixing positions
23
46
23 ø4
Assembly
ø4 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
Ball bearing slide KA 5632 in conjunction with central locking Stop Control see group 6.1
Processing technology see group 2
Drawer length
37 C
Fix to drawer
with at least
8 screws
38 37 128 b1 b2 b3 b4 b5
12,7 Min. cabinet depth
• = minimum number of screw-fixing positions
25
50
25 ø4
Assembly
ø4 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
ø 4,0 x 16 0 010 085 200
37 128 96 b1 b2 b3 b4
Min. cabinet depth
• = minimum number of screw-fixing positions
12,7 8,7
ø4
Assembly
23
46
23
15
ø4 ø6,3
Fixing screws
38 37 128 96 b1 b2 b3 b4
12,7 8,7
Assembly
ø4
25
50
25 15
ø4 ø6,3
Fixing screws
Dimensions mm Order no. PU
ø 6,3 x 10,5 0 051 264 200
ø 6,3 x 14 0 051 265 200
ø 4,0 x 16 0 010 085 200
Drawer length
ø4,5 ø6,3
34 C
ø8,2
ø4,5 ø6,3
Fix to drawer
with at least
8 screws
12 12
38 46 57 b1 b2
Min. cabinet depth
• = minimum number of screw-fixing positions
19
Assembly
29
58
ø4,5
29
ø4,5 ø6,3
Fixing screws
Fix to drawer
with at least 8 screws
5x 9,5 ø8 8x10
15 76 b1 76
Min. cabinet depth
• = minimum number of screw-fixing positions
19
+0,75
Assembly
38
76
ø4,5
38
ø5
Drawer length
ø4,5 ø6,3
C 16
Fix to drawer
with at least 16 screws 36,1
OE 17 111,1 b1 b2 b3
Min. cabinet depth
24+0,6 • = minimum number of screw-fixing positions
Assembly
ø4,5
71,4
36,1
min.19
ø4,5 ø6,3
Fixing screws
7
1,5
ø8 ø6
Order no. PU
0 072 120 50 Order no. PU
0 046 695 1000 0 079 438 1/200
±
Front panel fitting
• For two-dimensional adjustment ±
of fronts on 4-sided drawers
• For knocking into
the drawer fronts
ø5
• White plastic
10
ø20
Load capacity 20 kg 25 kg 35 kg
FR 6142 FR 1105
Page number 5.4.52 5.4.53
Accessories
Page number 5.4.54 - 5.4.56
Drawer length Min. cabinet depth Extension loss Hole spacing mm Order no. PU
mm mm EL mm b1 b2 b3 b4
250 253 69 64 - - - 0 075 993 1/20 sets
300 303 69 96 - - - 0 075 994 1/20 sets
350 353 69 96 64 - - 0 075 995 1/20 sets
400 403 69 96 128 - - 0 075 996 1/20 sets
450 453 79 96 128 32 - 0 075 997 1/20 sets
500 503 86 96 128 64 32 0 013 089 1/20 sets
min.3,5
min. 3,5
30
min.2,5
min. 2,5
up to 20
EL 16 9
37 128 b1 b2 b3 b4
min.1,5
min. 1,5
Min. cabinet depth
• = minimum number of screw-fixing positions
Assembly
min. 16
Double stop – engages
the extension in the front
position
12,5
±1 12,5
35
16 11
min.3,5
min. 3,5
30
min.2,5
min. 2,5
up to 20
EL 16 9
37 128 b1 b2 b3 b4
min.1,5
min. 1,5
Min. cabinet depth
• = minimum number of screw-fixing positions
Assembly
min. 16
35
16 11
min.3,5
min. 3,5
30
min.2,5
min. 2,5 9
up to 20
EL 16
37 128 b1 b2 b3
min.1,5
min. 1,5
Min. cabinet depth
• = minimum number of screw-fixing positions
min. 16
min. Assembly
12,5
+2 12,5 Double stop – engages
the extension in the front
position
33
15 11
ø3,5 ø3,5 ø6,3
30
9 min.2,5
min. 2,5
16 OE 37 128 b1 b2 b3 b4
min.1,5
min. 1,5
Min. cabinet depth
• = minimum number of screw-fixing positions
Assembly
12,5 12,5
+1 +1
2
1
43 60
min.48
min. 48
3
Drawer Min. cabinet Load capacity Extension loss Hole spacing mm Order no. PU
length mm depth mm kg EL mm b1 b2 b3 b4
400 405 100 89 160 160 - - 0 030 273 1 set
450 455 100 89 192 192 - - 0 030 274 1 set
500 505 100 89 160 128 160,0 - 0 030 275 1 set
550 555 100 89 160 160 160,0 - 0 030 276 1 set
600 605 90 99 192 160 192,0 - 0 030 277 1 set
650 655 90 99 192 192 201,5 - 0 030 278 1 set
700 705 80 119 224 192 219,5 - 0 030 279 1 set
750 755 80 119 224 224 237,5 - 0 030 280 1 set
800 805 80 119 256 224 255,5 - 0 030 281 1 set
850 855 80 119 192 192 192,0 204,5 0 030 282 1 set
900 905 80 134 288 288 259,5 - 0 030 283 1 set
950 955 80 134 320 256 309,5 - 0 030 284 1 set
1000 1005 80 134 352 224 359,5 - 0 030 285 1 set
EL 16
34 b1 b2 b3 b4
Min. cabinet depth
• = minimum number of screw-fixing positions
min. 20 Assembly
17 17
+0,5 +0,5 Double stop – engages the
extension in the front
position
9 32
12,5
min. 20
ø4 ø4 ø6,3
37
16
18,5 18,5
29
87 ø19
32
20
X = min. 29
19 min. 128
12,5±1
ø7
X+6
11
20 10
7
7
25
485
50
7
1,5
ø8 ø6
Order no. PU
0 072 120 50 Order no. PU
0 046 695 1000 0 079 438 1/200
±
Front panel fitting
• For two-dimensional adjustment of ±
fronts on 4-sided drawers
• For knocking into
the drawer fronts
ø5
• White plastic
10
ø20
Load capacity 25 kg 20 kg 25 kg
Order no. PU
0 056 014 1 set
Panel depth
84
364
Min. installation depth
388
37 320
16
Panel depth 84
378
Panel depth 68
345
Assembly
27
min. 5 12
ø6
9,5
30,5
Locating
22 catch
ø3,5 ø6,3
Fixing screws
Nominal length Min. cabinet depth Extension loss Hole spacing mm Order no. PU
mm mm EL mm b1 C
300 310 103 213,0 108,0 0 077 800 1 set
350 360 116 263,5 158,5 0 077 801 1 set
400 410 128 314,5 184,0 0 077 802 1 set
450 460 141 365,0 209,5 0 077 803 1 set
500 515 154 416,0 260,5 0 077 804 1 set
550 565 167 416,0 311,0 0 077 805 1 set
EL
71,5 C
25
Nominal length ø4
Min. cabinet depth
27
40 12,5 ø4
25,5
30
8,5
ø4,5
105,5 38 25
95,5 14,5 Assembly
84,5
73,5
62,5 24
35
9,8
7
18 ø4
Fixing screws
ST
= =
10
11
29
SB
32
72 297
193 SB = LM – 77
LH 8,5 116,5 SH = LH – 23
ST = T + (2 x C)
10 ø5 x 12
16 = =
96 Y 96
SH
90° 90°
• For pull-out panels, sample walls and displays which are vertically mounted between
two Quadro drawer runners
• Integrated pull-out stop
• Galvanized steel
Order no. PU
0 028 155 1 set
M4 M4
28 128 128 128
250
10
18,75 14 7
14,5 + 0,3
14,5 + 0,3
14
18,75 7
56,5
Attention:
32
Replace countersunk screws
Load capacity 75 kg with ø 4.5 mm pan-head
screws when using the
height adjustment.
Ceiling/floor assembly
37 a1 a2 a3
44
16
a6 a5 a4 90
Installation length
M6
a6 a5 a4 90
37 a1 a2 a3
M6
29 32 128 32
40
37 -45
15 24
32 32 32
47
Assembly of top extension rail
40 224 A B C
ø6 Through-holes
102 D E F
Length Hole spacing mm
30 mm A B C D E F G
Assembly of bottom cabinet rail
390 96 - - 202 - - 310
5
490 160 - - 265 - - 410
56,5 530 224 - - 321 - - 450
600 224 - - 402 51 - 520
24
700 224 160 - 238 264 51 620
15 800 224 224 - 288 314 51 720
G
900 224 224 160 338 364 51 820
30 Drawer bottom must be reinforced
for attaching the pull-out!
1000 224 224 160 388 277 70 920
Range of application
Hettich drawer and runner systems are suitable for domestic and commercial
furniture applications in living and bed rooms, kitchens, bathrooms and offices.
Corrosion testing
Hettich drawer and runner systems meet corrosion requirements according
to DIN EN 15338, 72 hour condensation water testing according to EN 6720.
Additional information
Using a chipboard quality - with reference to the screw pull-out resistance according
to DIN EN 320 (>1.000 N) – we recommend an installation with screws according to
the attachment illustrations in the catalogue. Modes of attachment which diverge
from the specification need to be verified by the furniture manufacturer.
5.5. 9
Range summary/Technical comparison
5.6 Table extension slides
i
Table extension slides for frame profiles
Trimanis Classic
Page number 5.6.15 - 5.6.18 5.6.19
Accessories
Corner bracket/reinforcing bar/
plate with support pin
Page 5.6.20
±0,5
Set contains: 13,5
1 pair of table extension slides,
standard or synchronous
8 dowels/bushes
4 locking hooks
27 112 112 32
700
120
ø5,1
20 16 16 ø5,1
ø7,5
y
500
min. 600
min. 10
1 extension leaf
y x 500 mm
!
Set contains:
1 pair of table extension slides,
standard or synchronous
12 dowels/bushes
6 tension jacks (only Trimanis Basic standard)
1350
370
20 6 x 55 ø5,1
5
10
y
500
min. 10
2 extension leaves
y x 500 mm
min. 600
Order no. PU
9 079 740 1 set
150
11 4x32
850
ø5,1
43 112 112 32
y
500
1 extension leaf
min. 600 y x 500 mm
Order no. PU
9 079 741 1 set
150
11 4x32
1350
ø5,1
y
500
min. 10
2 extension leaves
min. 600 y x 500 mm
Set contains:
1 pair of table extension slides
8 or 12 dowels/bushes
28
Installation length Number of extension leaves Width of extension leaves Order no./Finish PU
mm mm silver anodised dark anodised
1310 1 600 9 079 742 9 079 744 1 set
1660 2 500 9 079 746 9 079 747 1 set
24 448 178
650
872
356 448
12 64 40
14 28
600
min. 10
min. 700
1 extension leaf
Installation length 1660 mm y x 600 mm
10
ø11
27 448 350
825
1216
700 448
12 64 384
14 28
500
min. 10
Set contains:
1 pair of table extension slides
57
12 dowels/bushes
Order no. PU
9 079 772 1 set
720
450
ø5,1
7x55 20 20
60 60
y
500
min. 10
2 extension leaves
y x 500 mm
min. 600
Set contains:
1 pair of table extension slides
16 dowels/bushes 73
Order no. PU
9 079 773 1 set
980
650
ø5,1
7x55 2020
60 60 60
y
500
min. 10
3 extension leaves
y x 500 mm
min. 600
Set contains:
1 pair of table extension slides
20 or 24 dowels/bushes
82
ø5,1
7x55 2020
60 60 60
y
500
min. 10
4 extension leaves
y x 500 mm
min. 600
ø5,1
7x552020
60 60 60 60
y
500
min. 10
5 extension leaves
y x 500 mm
min. 600
Set contains:
1 pair of table extension slides
16 or 20 dowels/bushes 82
4x100 20
Installation length 980 mm
ø5,1
980
60 60 60
y
500
min. 10
3 extension leaves
min. 600 y x 500 mm
Installation length 1200 mm 5x100 20
ø5,1
1200
60 60 60
y
500
min. 10
4 extension leaves
y x 500 mm
min. 600
Set contains:
1 pair of table extension slides
±0,5
12 dowels/bushes 74,5
ø5,1
1300
30
ø5,1
1800
35 6 x 250
5 9,5
30
y
500
2 extension leaves
y x 500 mm
min. 600
Set contains:
1 pair of table extension slides
8 or 12 dowels/bushes
Installation length Number of extension leaves Width of extension leaves Order no./Finish PU
mm mm silver anodised dark anodised
1200 1 600 9 079 759 9 079 760 1 set
1800 2 500 9 079 762 9 079 763 1 set
100 5x200
ø5,3 Installation length 1200 mm
9,5
1200
9,5
1800
77 48
ø5,3
1
11
26
52,5
ø8
600/ 500
30
56,5 43,5 48
Set contains:
2 pcs 2-leg frames
Fixing accessories
1200 / 1800
13
755
50 x 50
900
755
50 50
900
Set contains:
1 pair of table extension slides
12 dowels/bushes 73,2
1155 160
960
451
195
35 ø4,2
45
26
1515 300
1005
451
195
35 ø4,2
45
26
y
500
min. 10
min. 600
2 extension leaves
y x 500 mm
Set contains:
1 pair of table extension slides
8 dowels/bushes
4 tension jacks
40 ±0,5
Order no. PU
9 079 768 1 set
35 20 16 16 ø7,5
ø5,1
450
Set contains:
1 pair of table extension slides 1,50
12 dowels/bushes
6 tension jacks
50,5 ±0,5
Order no. PU
9 079 769 1 set
20 7x55
ø5,1
740
Order no. PU
9 079 770 1 set
M6 x 6
ø19
665
Order no. PU
9 079 782 1 60
20 7x55
740
Trimanis Classic
• Table extension slide for 4 extension leaves
with max. leaf width of 500 mm
• For tables without frame structure
• Installation length 650 mm
• Max. load capacity 90 kg
• Can optionally be combined
with supporting leg
• Galvanized steel 100 ±0,5
Set contains:
1 pair of table extension slides 1,5
20 dowels/bushes
10 tension jacks
50,5 ±0,5
Order no. PU
9 079 771 1 set
M6 x 6
ø19
665
Order no. PU
9 079 782 1 60
20 7x55
650
Set contains:
2 stop plates for extension leaf
2 bearings for turn bar
1 turn bar with closed
frame system or central leg
Order no. PU
9 079 783 1 set
Functional principle
Set contains:
2 stop plates for inlaid panel
left/right
2 rod bearings left/right
Order no. PU
9 079 707 1 set
Functional principle
Corner bracket
• For connecting table leg and table frame profile
• Galvanized steel
11,3
8,5
15,6
11,8 40 28 75
10,4 60
43 56 43
90∞ 2 5 90∞ 2 90∞ 2
7 7
ca. 52 31
30
Height x Depth mm Order no. PU
40 x 43 9 079 776 32
60 x 56 9 079 777 16
75 x 43 9 079 778 16
Order no. PU
9 082 436 2
27
38
5,5
Order no. PU ø5,3
2,6
42