Professional Documents
Culture Documents
Audio System and Pairing: Supplementary Rider's Manual
Audio System and Pairing: Supplementary Rider's Manual
Audio System and Pairing: Supplementary Rider's Manual
The Ultimate
Riding Machine
When the time comes to sell more detailed informa- maintained by constant devel-
your BMW, please remember tion. opment work on design, equip-
to hand over this Rider's Manual; ment and accessories. Because
it is an important part of the mo- Indicates the end of ac- of this, your motorcycle may dif-
torcycle. cessory or equipment- fer from the information supplied
dependent information. in the Rider's Manual. In addition,
Abbreviations and BMW Motorrad cannot guarantee
Tightening torque. the total absence of errors. We
symbols
hope you will appreciate that no
Indicates warnings that claims can be recognized based
z you must comply with for Technical data
on the data, illustrations or de-
reasons of your safety and the scriptions in this manual.
safety of others, and to protect
your product against damage. Technical data
Special information on op- All dimensions, weights and out-
erating and inspecting your puts in the Rider's Manual relate
motorcycle as well as mainte- to the German DIN standards
nance and adjustment proce- and comply with their tolerance
dures.
General view
K 1600 GT/K 1600 GTL 2
1 Loudspeaker 5
2 Multifunction display ( 9)
3 Storage compartment with
connector plug ( 10)
4 Operating panel ( 7)
Overviews
5 Multi-Controller ( 8)
z
General view R 1200 RT
2 1 Loudspeaker
6 2 Multifunction display ( 9)
3 Audio storage compart-
ment with connector plug
( 10)
4 Operating panel ( 7)
Overviews
5 Multi-Controller ( 8)
z
Operating panel
1 Switching on audio system 2
( 12). 7
Switching off audio system
( 12).
Mute (MUTE) ( 14).
2 Select playback source
Overviews
( 12).
3 Select tuner mode ( 16)
( 18)
Select playback mode
for external audio devices z
( 29)
Selecting tuner mode for
satellite radio (not available
in all countries) ( 21)
4 Finding and saving stations
automatically ( 16).
Manually storing stations
( 17).
Multi-Controller
2 1 Multi-Controller with twist
8 and tilt functions
a by twisting:
select menu items and
also other possibilities
Adjusting volume ( 13).
Overviews
b by pressing to right:
Select settings, among
other possibilities, search
of station or track title and
z save, select memory slots
by pressing to left:
Exiting menu
Multifunction display
1 Text field 2
2 Playback source ( 12) 9
3 Symbol for the playback
source
4 Playback mode (depends
on playback source)
Overviews
5 Bluetooth status ( 31)
6 Mute (MUTE) ( 14).
z
Audio system
2 storage compartment
10 K 1600 GT /
K 1600 GTL
1 Locking device (see Rider's
Manual)
2 Connection for USB plug
Overviews
Overviews
3 Storage compartment for
audio devices and mobile
phone
z
Switching on audio Switching off audio Select playback source
3 system system
12 Switch on ignition.
If the audio system was
switched on before switching
off the ignition, the system
is automatically switched on
General operation
again.
General operation
the on-board speakers or
a Bluetooth-paired output
Scale 2 appears on the display
device. Should the Bluetooth
while the volume is being ad-
function not be offered in
justed. The scale disappears
certain countries, then audio
automatically once no further
playback is only possible via the
changes are made to the volume
loudspeakers.
setting.
Switching the speakers off
causes automatic activation of Turn Multi-Controller 1 in di- If the display shows z
the Bluetooth function. Switch rection a, to increase volume. Speaker OFF, the speakers
on the speakers to switch off the are switched off and Bluetooth is
Turn Multi-Controller 1 in di-
Bluetooth function. switched on.
rection b, to decrease volume.
If the audio playback is carried
out with a Bluetooth-capable out-
put device, then the volume must
be set on this device. The Multi-
Controller cannot be used for this
purpose. Exception: if a BMW
Mute (MUTE) On: speakers on.
3 Off: speakers off.
If the speakers are switched
14
OFF the Bluetooth function is
automatically switched ON, and
vice versa.
Sound settings
General operation
General operation
curve on (on) or off (off). nected communication systems.
AUX: Set input signal level Input signal level
(1...6).
The volume can be set as de-
Select the menu item you
scribed on page ( 13).
want, select the setting of your
In the case of audio devices that
choice and exit the menu.
can only be connected to the
Volume and speed system via the jack, the volume
The audio system can automat-
that can be set depends on: z
ically adapt the playback volume the output power of the audio
to the speed of the motorcy- device
cle. The rate at which the vol- the input signal level selected
ume increases in relation to ve- the volume set on the audio
hicle speed can be set on three device.
curves:
The volume on the audio device
and the input signal level should
be adjusted so that the resulting
Selecting the band Twelve system memory slots: After the audio system is
4 The Autostore function has to switched on, the tuner re-
be used to assign the twelve quires approximately a minute
16 stations with the strongest sig- to find all receivable stations.
nals to these slots. Do not start the automatic scan
Twelve personal memory slots: until after this time, as other-
The rider can manually as- wise the stations not found up
sign a station to each of these to that point cannot be taken into
Radio
Radio
Manually storing stations
Repeatedly press the MODE
Select a station or frequency
Press MEM button to save z
button until MAN appears in selected frequency/station.
from the frequency band.
the top line of the display. Memory will flash in the dis-
It is also possible to se- play.
lect stations from the sys-
tem memory or the personal
memory and then move them
to a different slot in the personal
memory.
Radio
Press Multi-Controller 1 in di- z
rection a or b to select mem-
ory space. The following settings are avail-
able:
Reception settings RDS: Switch RDS on or off
Select the menu item you
Select the reception
want, select the setting of your
settings choice and exit the menu.
Call up the Settings menu
and select Audio - Tuner. Radio Data System (RDS)
Some stations in the FM band
transmit additional information,
including the program name.
The name of the station can only
be displayed if the RDS function
is on. If no station name is being
transmitted, reception range and
Satellite radio Multifunction display 5 Memory slot or channel
5 The functions for the reception
number (depending on
playback mode) ( 21)
20 of satellite radio described in this
( 23)
chapter are only offered in coun-
tries in which the reception of
"Sirius Satellite Radio" is possi- Signal strength
ble. No signal
Satellite radio
Subscribing to stations
To listen to a station, it must first Poor signal
be subscribed to. Subscribing to 1 Playback source Sirius Ra-
a station can generate costs not dio
borne by BMW Motorrad. 2 Playback mode:
z Good signal
Information on the available SR: Play a channel from
stations can be viewed the personal list of presets
at "www.sirius.com" or ( 23)
"www.siriusxm.com". CAT: Play a channel from Very good signal
the list of categories
A station is activated by phone ( 21)
by calling the phone number 3 Text field for selectable
1.888.539.7474. In addition, the channel information
Selecting station
serial number of the audio sys- ( 20) information
tem is also required ( 25). 4 Display of signal strength Call up the Settings
( 20) menu and select Audio -
SiriusSirius Info.
Selecting category and
channel 5
21
Satellite radio
The following information types The choice of playback mode
can be displayed in the text field: appears on the display.
Channel n...: Name of Category: Selection of a
station If the audio system is in the channel from the list of cate-
Artist: Name of artist Preset playback mode (SR gories
in the display) or if you want z
Title: Name of track Preset: Selection from the
to change the category: press personal list of presets
Composer: Name of com-
the MODE button. Select Category.
poser
22 Saving station
Selecting category and channel
( 21).
Satellite radio
Satellite radio
Press Multi-Controller 1 in di- Press MEM button again to
rection a or b to select desired save station on selected mem-
If the audio system is in the
memory space. ory space.
The current assignment of this The station previously saved
Category playback mode
(CAT showing on the display):
memory slot flashes in the dis- there will be overwritten. z
press the MODE button.
play.
5
24
Satellite radio
The choice of playback mode The list of memory slots appears The channel information you se-
appears on the display. on the display. lected appears in the text field.
Category: Selection of a
channel from the list of cate- The solid circle indicates the
gories current selection.
z Select the memory slot you
Preset: Selection from the
personal list of presets want.
Select Preset.
Satellite radio
Sirius - Sirius ESN. updated.
ESN and the twelve-digit serial
number appear on the display. "UPDATING"
The telephone number to dial The station number assignment
in order to take out a subscrip- is being updated.
tion for additional channels also
appears on the display. z
Status messages
Under certain circumstances, the
following status messages are
shown in the text field:
clude
not possible as the supply volt-
a 3.5 mm jack plug, Temperatures inside the
age is limited.
a USB connection (supports stowage compartments can
USB 1.1 and USB 2). be high, particularly in summer,
and it is important to remem- Connecting audio
The audio device must ber that high temperatures might device K 1600 GT /
have a compatible connector, damage objects stowed in the K 1600 GTL
fit into the storage compart- compartments. This applies in
Switching off audio system
ment, particular to electronic devices
( 12).
be able to withstand vibrations such as mobile phones and MP3
arising from normal motorcycle players.
z use, Refer to the operating instruc-
be able to withstand the high tions of your electronic devices
temperatures occurring inside for possible usage restrictions.
the stowage compartment in
summer. BMW Motorrad advises against
using devices with hard disks as
media storage devices, as vibra-
If the connecting cable is
routed to the outside be- 6
tween the storage compartment
and the lid, the seal may be dam- 27
aged.
Do not route the connection ca-
ble to the outside.
data.
Once you have selected the
playback mode: select the ti-
tle of the track with which you
want playback to start.
RND is displayed at position 1.
Random playback
Bluetooth
(transmitting with a limited range) By nearby Bluetooth-capable BMW Motorrad communication
on the license-free ISM band devices systems. Playback in this case is
(Industrial, Scientific, Medical) not through the speakers, but via
Note on health:
between 2.402 GHz and 2.480 radio transmission through the z
The body of scientific data
GHz. They can be operated any- headphones in the helmet.
available at this time gives no
where in the world without a li-
grounds for assuming that
cense being required. Switching Bluetooth
Bluetooth can have negative
Although Bluetooth is designed
effects on human health. The function on or off
for establishing connections over
BMW Motorrad audio system To switch on the Bluetooth
short distances as robustly as
transmits at a maximum of function: switch off the speak-
possible, faults are possible as
10 mW; a mobile phone by ers.
with any other wireless technol-
contrast can have a transmit- To switch off the Bluetooth
ogy. Connections can be sub-
power rating as high as 2 W. function: switch on the speak-
ject to interference, can be briefly
The ISM frequency band used ers.
interrupted or can even be lost
by Bluetooth is reserved for the Switching speakers on and off
completely. Especially when sev-
worldwide use of devices in the ( 14).
eral devices are operated in one
industrial, scientific and medi-
Bluetooth network, there is no
the audio system's memory, dard 2.0 must be used. If both
7 the audio system automatically BMW systems are using Blue-
searches for this system. tooth 1.2, only one helmet may
32 If connection to a BMW Motorrad be connected to the audio sys-
communication system is not tem.
established despite the fact that Refer to the operating instruc-
the system is switched on: tions of your communication sys-
Briefly press the on/off button tem for information on Bluetooth
Bluetooth
Bluetooth
in the BMW Motorrad communi-
period. compatible devices; the word
cation system has to be deleted
beforehand. Always start by pair-
Searching… appears
Call up the Settings on the display. Now music
ing with the audio system first. menu and select Audio - playback takes place during the
Your motorcycle comes BT pairing. search. All the devices found in z
complete with a supple- Select Pair helmet 1 to the search are then listed.
mentary manual containing de- establish the connection to the
tailed instructions on pairing with communication system in the
different device combinations. rider's helmet.
Select Pair helmet 2 to
Pairing establish the connection to the
Switch the Bluetooth function communication system in the
on and the loudspeakers off. passenger's helmet, once the
Switch off all other Bluetooth- rider's helmet has been paired
enabled devices (e. g. mobile (possible only with two BMW
telephones) within ten me- Motorrad communication sys-
tems with Bluetooth standard BMW Motorrad communication
ters (or at least their Bluetooth systems are shown as
function). 2.0).
BMW_HE... .
Select the communication sys- tion systems support Bluetooth Additional functions
7 tem to establish the connec- standard 2.0 or higher.
tion. Turn off any Bluetooth de-
34 Connecting is indicated. vices in the vicinity that may
One of the following will ap- not have been switched off.
pear: Delete the pairing information
Successful: connec- saved in the audio system.
tion established, playback via Delete the devices stored in
Bluetooth
Bluetooth
Rider's and passenger
helmet with BMW Motorrad
communication system with z
Bluetooth standard 2.0
If the ON button (MUTE func-
tion) is pressed, playback is
interrupted and the intercom
function is switched on in both
helmets. Pressing the ON but-
ton again terminates the in-
tercom function and playback
resumes (it may take up to ap-
prox. 10 seconds to switch
between the two).
Introduction BMW Motorrad Navigator Communication systems:
8 Two Bluetooth devices have to The description is based
A2DP (Advanced Audio Dis-
recognize each other before they tribution Profile) BMW to have
36 on the K 1600 GT and
can communicate. This pro- audio system audio data trans-
K 1600 GTL, but also applies to
cess of mutual recognition is mitted.
the R 1200 RT. Exceptions are
known as pairing. During pair- HFP/HSP, to communicate
described separately.
ing a Bluetooth-capable device with the BMW navigation sys-
tem.
Pairing
Pairing
devices. wireless technology in every situ-
ation.
The BMW Motorrad communica-
tion system can store an A2DP- z
compatible music device only. If
another music device than the
audio system is to be connected
to the communication system,
the pairing information to the au-
dio system must be deleted first.
Pairing
helmet communication
system
Switching on audio system Unpair all and
Select z
( 39). Confirm to delete the pair-
Deleting pairing entries ( 39). ing entries.
Switching on communication
system ( 40).
Deleting pairing entries in com-
munication system ( 40).
Making communication system If the audio system does not
visible ( 40). come on automatically, press
Finding communication system the ON button.
( 41).
Switching off audio system Deleting pairing entries
( 42).
Call up the Settings
Switching off communication menu and select Audio -
system ( 42). BT pairing.
Switching on Deleting pairing entries in nication system" are subject to a
8 communication system communication system 60-second time limit. Therefore,
they must be carried out immedi-
40 ately in sequence.
BMW Motorrad recommends
reading through the procedure
description for both steps before
proceeding.
Pairing
z
Press and hold button 2 until a Simultaneously press and hold
high confirmation tone sounds button 1 and button 2.
and the green LED 6 beings to If deleting was successful, the
flash. green LED 6 lights up briefly
The communication system is and then switches over to slow
initialized and the green LED readiness flashing. In addition,
flashes slowly. a high confirmation tone also Simultaneously press and hold
Then the communication sounds. button 2 and button 3 of hel-
system switches into the ready met until flashing speed of
mode and the green LED Making communication green LED 6 has increased
flashes once per second. system visible once (2 Hz flashing).
The helmet communication
The two steps "Making
system is now visible for other
communication system vis-
Bluetooth devices for a maxi-
ible" and "Searching for commu-
mum of 60 seconds; the green
LED flashes twice per second. 8
Finding communication 41
system
The two steps "Making
communication system vis-
ible" and "Searching for commu-
Pairing
nication system" are subject to a
60-second time limit. Therefore, BMW Motorrad communication
they must be carried out immedi- Select Pair helmet 1 to systems are shown as z
ately in sequence. establish the connection to the BMW_HE... .
BMW Motorrad recommends rider's helmet. Select the communication sys-
reading through the procedure The audio system searches for tem to establish the connec-
description for both steps before visible Bluetooth-compatible tion.
proceeding. devices; Searching… ap- Connecting is indicated.
Call up the Settings pears on the display. All the If pairing is successful the word
menu and select Audio - devices found in the search are Successful appears on
BT pairing. then listed. the display.
Switching off audio Switching off Reestablishing connection
8 system communication system If pairing of the audio system
42 with the communication system
was successful, but no connec-
Pairing tion was established:
z
Turn off the ignition or, if the Press and hold button 2 until a
ignition is turned on, press low confirmation tone sounds
the ON button. and the red LED 4 beings to
flash.
The communication system Press the ON button twice in
switches off and the red LED not too rapid succession so
flashes three times. that the systems reconnect.
Switching on systems
Switch on all systems involved.
The system detect each other
and no further steps are re-
quired.
8
43
Pairing
As an alternative to establishing
a connection to the audio sys- z
tem, the 2 button on the com-
munication system can quickly
be pressed consecutively to re-
connect the systems to each
other.
Expansion stage 2:
8 Audio system with 2
44 helmets
Requirements
- Two helmets with BMW
Motorrad communication
Pairing
Pairing
Pairing communication system Switch on ignition.
in Helmet 1 with communica-
tion system in Helmet 2
z
Pairing audio system with
communication system in
Helmet 1
Switching on audio system
Unpair all and
Select
( 45).
Confirm to delete the pair-
Deleting pairing entries ( 45). ing entries.
Switching on communication If the audio system does not
system in Helmet 1 ( 46). come on automatically, press
Deleting pairing entries in com- the ON button.
munication system in Helmet 1
( 46).
Making communication system
of Helmet 1 visible ( 46).
Switching on Deleting pairing entries in Making communication
8 communication system communication system in system of Helmet 1 visible
46 in Helmet 1 Helmet 1 The two steps "Making
communication system vis-
ible" and "Searching for commu-
nication system" are subject to a
60-second time limit. Therefore,
Pairing
Pairing
Searching for
communication system BMW Motorrad communication
of Helmet 1 Select Pair helmet 1 to systems are shown as z
The two steps "Making establish the connection to the BMW_HE... .
communication system vis- rider's helmet. Select the communication sys-
ible" and "Searching for commu- The audio system searches for tem to establish the connec-
nication system" are subject to a visible Bluetooth-compatible tion.
60-second time limit. Therefore, devices; Searching… ap- Connecting is indicated.
they must be carried out immedi- pears on the display. All the If pairing is successful the word
ately in sequence. devices found in the search are Successful appears on
BMW Motorrad recommends then listed. the display.
reading through the procedure
description for both steps before
proceeding.
Call up the Settings
menu and select Audio -
BT pairing.
Switching off Deleting pairing entries in com- and the green LED 6 beings to
8 communication system munication system in Helmet 2 flash.
in Helmet 1 ( 48). The communication system is
48 Making communication system initialized and the green LED
of Helmet 2 visible ( 49). flashes slowly.
Searching for communication Then the communication
system of Helmet 2 ( 49). system switches into the ready
Switching off audio system mode and the green LED
Pairing
Pairing
system of Helmet 2 visible 60-second time limit. Therefore,
they must be carried out immedi-
The two steps "Making Simultaneously press and hold ately in sequence.
communication system vis- button 2 and button 3 of Hel- BMW Motorrad recommends
z
ible" and "Searching for commu- met 2 until flashing speed of reading through the procedure
nication system" are subject to a green LED 6 has increased description for both steps before
60-second time limit. Therefore, once (2 Hz flashing). proceeding.
they must be carried out immedi- The helmet communication
ately in sequence. system is now visible for other Call up the Settings
BMW Motorrad recommends Bluetooth devices for a maxi- menu and select Audio -
reading through the procedure mum of 60 seconds; the green BT pairing.
description for both steps before LED flashes twice per second.
proceeding.
Switching off audio
8 system
50
Pairing
Pairing
( 53). flashes once per second.
Simultaneously press and hold
Switching on Making communication button 2 and button 3 of Hel- z
communication system system of Helmet 2 visible met 2 until flashing speed of
in Helmet 1 The two steps "Making green LED 6 has increased
communication system vis- once (2 Hz flashing).
ible" and "Searching for commu- The helmet communication
nication system" are subject to a system is now visible for other
60-second time limit. Therefore, Bluetooth devices for a maxi-
they must be carried out immedi- mum of 60 seconds; the green
ately in sequence. LED flashes twice per second.
BMW Motorrad recommends
reading through the procedure
description for both steps before
proceeding.
Press and hold button 2 until a
high confirmation tone sounds
Searching for met 1 until the flashing speed ond and the voice connection
8 communication system of the green LED 6 has in- is established. In addition, a
of Helmet 2 creased twice (4 Hz flashing). high confirmation tone sounds
52 The communication system of in both helmets.
The two steps "Making Helmet 1 now searches for an-
communication system vis- other visible helmet for a maxi- Switching off
ible" and "Searching for commu- mum of 15 seconds; the green communication system
nication system" are subject to a LED 6 flashes four times per in Helmet 1
Pairing
Pairing
As an alternative to establishing
a connection to the audio sys- z
tem, the 2 button on the com-
munication system can quickly
Press and hold button 2 until a be pressed consecutively to re-
low confirmation tone sounds connect the systems to each
and the red LED 4 beings to other.
Press the ON button twice in
flash.
not too rapid succession so
The communication system
that the systems reconnect.
switches off and the red LED
flashes three times.
Switching on systems
Switch on all systems involved.
The system detect each other
and no further steps are re-
quired.
Expansion stage 3:
8 Audio system with 2
54 helmets and 2 mobile
phones
Requirements
- Two helmets with
Pairing
BMW Motorrad
communication system
with Bluetooth 2.0 or
z higher (pairing not possible
with Bluetooth 1.2).
- All Bluetooth-compatible
devices in the area or their
Bluetooth function must be
deactivated (if necessary,
use the search function of
a mobile phone or a nav-
igation system to check
whether unknown Blue-
tooth devices are visible).
Procedure for expansion Switching on communication
stage 3: system in Helmet 1 ( 56). 8
Deleting pairing entries in com-
Audio system – 2 helmets – 2 55
munication system in Helmet 1
mobile phones
( 56).
Pairing audio system with com- Making communication system
munication system in Helmet 1 of Helmet 1 visible ( 57).
Pairing audio system with com- Searching for communication
Pairing
munication system in Helmet 2 system of Helmet 1 ( 57).
Pairing communication system Switching off communication
in Helmet 1 with communica- If the audio system does not
system in Helmet 1 ( 52). come on automatically, press z
tion system in Helmet 2
the ON button.
Pairing communication sys- Switching on audio
tem in Helmet 1 with mobile system Deleting pairing entries
phone 1
Pairing communication sys- Switch on ignition. Call up the Settings
tem in Helmet 2 with mobile menu and select Audio -
phone 2 BT pairing.
Pairing
Pairing
they must be carried out immedi-
Searching for
ately in sequence.
communication system
BMW Motorrad recommends
reading through the procedure of Helmet 1 Select Pair helmet 1 to z
description for both steps before The two steps "Making establish the connection to the
proceeding. communication system vis- rider's helmet.
ible" and "Searching for commu- The audio system searches for
nication system" are subject to a visible Bluetooth-compatible
60-second time limit. Therefore, devices; Searching… ap-
they must be carried out immedi- pears on the display. All the
ately in sequence. devices found in the search are
BMW Motorrad recommends then listed.
reading through the procedure
description for both steps before
proceeding.
( 61).
BMW Motorrad communication
z systems are shown as Switching on
BMW_HE... . communication system
Select the communication sys- in Helmet 2
Press and hold button 2 until a
tem to establish the connec-
low confirmation tone sounds
tion.
and the red LED 4 beings to
Connecting is indicated. flash.
If pairing is successful the word
The communication system
Successful appears on switches off and the red LED
the display.
flashes three times.
Pairing
flashes once per second. system of Helmet 2 visible
The two steps "Making Simultaneously press and hold
Deleting pairing entries in communication system vis- button 2 and button 3 of Hel- z
communication system in ible" and "Searching for commu- met 2 until flashing speed of
Helmet 2 nication system" are subject to a green LED 6 has increased
60-second time limit. Therefore, once (2 Hz flashing).
they must be carried out immedi- The helmet communication
ately in sequence. system is now visible for other
BMW Motorrad recommends Bluetooth devices for a maxi-
reading through the procedure mum of 60 seconds; the green
description for both steps before LED flashes twice per second.
proceeding.
Pairing
communication system Making communication
in Helmet 1 system of Helmet 2 visible
The two steps "Making z
communication system vis-
Turn off the ignition or, if the
ible" and "Searching for commu-
ignition is turned on, press
nication system" are subject to a
the ON button.
60-second time limit. Therefore,
they must be carried out immedi-
Pairing communication
ately in sequence.
system in Helmet 1 with BMW Motorrad recommends
communication system in reading through the procedure
Helmet 2 description for both steps before
Press and hold button 2 until a proceeding.
Switching on communication
high confirmation tone sounds
system in Helmet 1 ( 61).
and the green LED 6 beings to
Making communication system flash.
of Helmet 2 visible ( 61).
Searching for met 1 until the flashing speed
8 communication system of the green LED 6 has in-
of Helmet 2 creased twice (4 Hz flashing).
62 The communication system of
The two steps "Making Helmet 1 now searches for an-
communication system vis- other visible helmet for a maxi-
ible" and "Searching for commu- mum of 15 seconds; the green
nication system" are subject to a LED 6 flashes four times per
Pairing
Pairing
Switching off communication
system in Helmet 1 ( 63).
z
Switching on
communication system
Press and hold button 2 until a in Helmet 1
low confirmation tone sounds
and the red LED 4 beings to
flash.
The communication system
Press and hold button 2 until a switches off and the red LED
low confirmation tone sounds flashes three times.
and the red LED 4 beings to
flash. Pairing communication
The communication system system in Helmet 1 with
switches off and the red LED mobile phone 1
flashes three times. Press and hold button 2 until a
Switching on communication
high confirmation tone sounds
system in Helmet 1 ( 63).
and the green LED 6 beings to BMW Motorrad recommends Searching for
8 flash. reading through the procedure communication system
The communication system is description for both steps before of Helmet 1
64 initialized and the green LED proceeding.
flashes slowly. The two steps "Making
Then the communication communication system vis-
system switches into the ready ible" and "Searching for commu-
mode and the green LED nication system" are subject to a
Pairing
Pairing
phone, it may be necessary Switching on systems ( 67).
to also confirm establishment Reestablishing connection
of an automatic connection ( 68). z
or generally carry out a final
confirmation.
Press and hold button 2 until a
Switching off Mobile low confirmation tone sounds
phone 1 and the red LED 4 beings to
flash.
Switch off Mobile phone 1 or
its visibility. The communication system
switches off and the red LED
flashes three times.
Pairing communication
system in Helmet 2 with
mobile phone 2
Switching on communication
system in Helmet 2 ( 66).
Switching on Switching on Mobile
8 communication system phone 2
66 in Helmet 2 Switch on Mobile phone 2.
Switch on Bluetooth functions
in Mobile phone 2.
Making communication
Pairing
Pairing
60-second time limit. Therefore,
phone, it may be necessary
they must be carried out immedi-
to also confirm establishment
ately in sequence.
BMW Motorrad recommends
of an automatic connection z
or generally carry out a final
reading through the procedure confirmation.
description for both steps before Press and hold button 2 until a
proceeding. low confirmation tone sounds
Have Mobile phone 2 search and the red LED 4 beings to
for Bluetooth devices. flash.
Mobile phone 2 displays a list The communication system
of the Bluetooth devices found switches off and the red LED
(and any already saved). flashes three times.
The communication system
is displayed as a headset Switching on systems
with the designation or Switch on all systems involved.
BMW_HELMET_II_xxxx, The system detect each other
where "xxxx" stands for the and no further steps are re-
identification number. quired.
Reestablishing connection
8 If pairing of the audio system
68 with the communication system
was successful, but no connec-
Pairing tion was established:
As an alternative to establishing
z a connection to the audio sys-
tem, the 2 button on the com-
munication system can quickly
be pressed consecutively to re-
connect the systems to each
Press the ON button twice in other.
not too rapid succession so
that the systems reconnect.
Expansion stage 4:
Audio system with 8
helmet, navigation 69
system and mobile
phone
Requirements
Pairing
- One helmet with
BMW Motorrad
communication system z
with Bluetooth 2.0 or
higher (pairing not possible
with Bluetooth 1.2).
- All Bluetooth-compatible
devices in the area or their
Bluetooth function must be
deactivated (if necessary,
use the search function of
a mobile phone or a nav-
igation system to check
whether unknown Blue-
tooth devices are visible).
Procedure for expansion Finding communication system Deleting pairing entries
8 stage 4: ( 72). Call up the Settings
Switching off audio system menu and select Audio -
70 Audio system - helmet -
( 73). BT pairing.
navigation system - mobile
Switching off communication
phone
system ( 73).
Pairing audio system with hel-
met communication system Switching on audio
Pairing
Pairing
z
Press and hold button 2 until a Simultaneously press and hold
high confirmation tone sounds button 1 and button 2.
and the green LED 6 beings to If deleting was successful, the
flash. green LED 6 lights up briefly
The communication system is and then switches over to slow
initialized and the green LED readiness flashing. In addition,
flashes slowly. a high confirmation tone also Simultaneously press and hold
Then the communication sounds. button 2 and button 3 of hel-
system switches into the ready met until flashing speed of
mode and the green LED Making communication green LED 6 has increased
flashes once per second. system visible once (2 Hz flashing).
The helmet communication
The two steps "Making
system is now visible for other
communication system vis-
Bluetooth devices for a maxi-
ible" and "Searching for commu-
mum of 60 seconds; the green
8 LED flashes twice per second.
72 Finding communication
system
The two steps "Making
communication system vis-
ible" and "Searching for commu-
Pairing
Pairing
period of time, the communi-
cation system switches off the
connection.
z
Switching on communication
Turn off the ignition or, if the Press and hold button 2 until a system ( 74).
ignition is turned on, press low confirmation tone sounds Making communication system
the ON button. and the red LED 4 beings to visible ( 74).
flash. Searching for helmet communi-
The communication system cation system ( 74).
switches off and the red LED Switching off communication
flashes three times. system ( 73).
Switching on Making communication green LED 6 has increased
8 communication system system visible once (2 Hz flashing).
The helmet communication
74 The two steps "Making
system is now visible for other
communication system vis-
Bluetooth devices for a maxi-
ible" and "Searching for commu-
mum of 60 seconds; the green
nication system" are subject to a
LED flashes twice per second.
60-second time limit. Therefore,
Pairing
Pairing
"Bluetooth" menu, select the
to the helmet. Searching for mobile phone "Activated" option.
( 75). In the "Phone" menu, select
Switching off z
Switching off navigation system the option "Add" and confirm
communication system ( 76). with "OK".
Making mobile phone invisible The navigation system now
( 76). searches for a visible mobile
Switching on systems ( 76). phone for 60 seconds.
Reestablishing connection The navigation system displays
( 76). a list of the Bluetooth devices
found.
Making mobile phone The Bluetooth code of the mo-
visible bile phone is stored in the mo-
Switch on mobile phone. bile phone.
Press and hold button 2 until a Switch on Bluetooth function in Select the mobile phone and
low confirmation tone sounds mobile phone. confirm with "OK".
and the red LED 4 beings to "Attempting to connect to
flash. Bluetooth device. Bluetooth
ID code: 1234" appears in the
display window of the naviga- Switching on systems
8 tion system.
Switch on all systems involved.
Enter code "1234" for naviga-
76 The system detect each other
tion system after being asked
and no further steps are re-
to do so in mobile phone dis-
quired.
play.
Pairing is confirmed by the mo- Reestablishing connection
bile phone.
Pairing
Making mobile
phone invisible
Switch off visibility of Mobile Press the ON button twice in
phone for other Bluetooth de- not too rapid succession so
vices following successful pair- that the systems reconnect.
ing.
Expansion stage 5:
Audio system with 2 8
helmets, navigation 77
system and 2 mobile
phones
Requirements
Pairing
- Two helmets with BMW
Motorrad communication
system with Bluetooth 2.0 z
or higher (pairing not pos-
sible with Bluetooth 1.2).
- All Bluetooth-compatible
devices in the area or their
Bluetooth function must be
deactivated (if necessary,
use the search function of
a mobile phone or a nav-
igation system to check
whether unknown Blue-
tooth devices are visible).
Procedure for expansion Pairing audio system with
8 stage 5: communication system in
78 Audio system – 2 helmets – Helmet 1
navigation system – 2 mobile Switching on audio system
phones ( 78).
Pairing audio system with com- Deleting pairing entries ( 78).
munication system in Helmet 1 Switching on communication
Pairing
Pairing
Unpair all and
Select z
Confirm to delete the pair-
ing entries.
Press and hold button 2 until a Simultaneously press and hold
high confirmation tone sounds button 1 and button 2.
and the green LED 6 beings to If deleting was successful, the
flash. green LED 6 lights up briefly
The communication system is and then switches over to slow
initialized and the green LED readiness flashing. In addition,
flashes slowly. a high confirmation tone also
Then the communication sounds.
system switches into the ready
mode and the green LED
flashes once per second.
Making communication green LED 6 has increased
8 system of Helmet 1 visible once (2 Hz flashing).
The helmet communication
80 The two steps "Making
system is now visible for other
communication system vis-
Bluetooth devices for a maxi-
ible" and "Searching for commu-
mum of 60 seconds; the green
nication system" are subject to a
LED flashes twice per second.
60-second time limit. Therefore,
Pairing
Pairing
( 84).
BMW Motorrad communication
systems are shown as Switching on z
BMW_HE... . communication system
Select the communication sys- in Helmet 2
Press and hold button 2 until a
tem to establish the connec-
low confirmation tone sounds
tion.
and the red LED 4 beings to
Connecting is indicated. flash.
If pairing is successful the word
The communication system
Successful appears on switches off and the red LED
the display.
flashes three times.
Pairing
60-second time limit. Therefore,
they must be carried out immedi-
ately in sequence. BMW Motorrad communication
BMW Motorrad recommends Select Pair helmet 2 to systems are shown as z
reading through the procedure establish the connection to the BMW_HE... .
description for both steps before passenger's helmet. Select the communication sys-
proceeding. The audio system searches for tem to establish the connec-
visible Bluetooth-compatible tion.
Call up the Settings devices; Searching… ap-
menu and select Audio -
Connecting is indicated.
pears on the display. All the If pairing is successful the word
BT pairing. devices found in the search are Successful appears on
then listed. the display.
Switching off audio Searching for communication The communication system is
8 system system of Helmet 2 ( 85). initialized and the green LED
Switching off communication flashes slowly.
84 system in Helmet 1 ( 81). Then the communication
Switching off communication system switches into the ready
system in Helmet 2 ( 86). mode and the green LED
flashes once per second.
Switching on
Pairing
Pairing
60-second time limit. Therefore, second.
they must be carried out immedi-
Simultaneously press and hold ately in sequence.
button 2 and button 3 of Hel- BMW Motorrad recommends
z
met 2 until flashing speed of reading through the procedure
green LED 6 has increased description for both steps before
once (2 Hz flashing). proceeding.
The helmet communication
system is now visible for other
Bluetooth devices for a maxi-
mum of 60 seconds; the green
LED flashes twice per second. The green LED of the searching
helmet 2 flashes twice as fast
as the green LED of the visible
helmet 1.
Pairing
they must be carried out immedi-
Searching for
ately in sequence.
communication system
BMW Motorrad recommends
reading through the procedure of Helmet 1 z
description for both steps before The two steps "Making
proceeding. communication system vis-
Press and hold button 2 until a
ible" and "Searching for commu-
high confirmation tone sounds
nication system" are subject to a
and the green LED 6 beings to
60-second time limit. Therefore,
flash.
they must be carried out immedi-
The communication system is ately in sequence.
initialized and the green LED
BMW Motorrad recommends
flashes slowly.
reading through the procedure
Then the communication description for both steps before
system switches into the ready proceeding.
mode and the green LED
flashes once per second. Simultaneously press and hold Switch on navigation system.
button 2 and button 3 of Hel-
met 1 until flashing speed of
In the "Extras" - "Settings" - Switching off Searching for Mobile phone 1
8 "Bluetooth" menu, select the communication system ( 88).
"Activated" option. in Helmet 1 Switching off navigation system
88 In the "Audio" menu, select the ( 89).
option "Add" and confirm with Making Mobile phone 1 invisi-
"OK". ble ( 89).
The navigation system now
searches for a visible commu- Making Mobile phone 1
Pairing
Pairing
bile phone. invisible in Helmet 2
Select mobile phone 1 and
Switch off visibility of Mobile
confirm with "OK".
phone 1 for other Bluetooth
z
"Attempting to connect to
Bluetooth device. Bluetooth devices.
ID code: 1234" appears in the
Pairing communication
display window of the naviga-
tion system. system in Helmet 2 with
Enter code "1234" for naviga- mobile phone 2
tion system after being asked Switching on communication
to do so in mobile phone dis- system in Helmet 2 ( 89).
play. Switching on Mobile phone 2 Press and hold button 2 until a
Pairing is confirmed by the mo- ( 90). high confirmation tone sounds
bile phone. Making communication system and the green LED 6 beings to
Depending on the mobile of Helmet 2 visible ( 90). flash.
phone, it may be necessary Searching for communication The communication system is
to also confirm establishment system of Helmet 2 ( 90). initialized and the green LED
of an automatic connection flashes slowly.
Then the communication Searching for
8 system switches into the ready communication system
mode and the green LED of Helmet 2
90 flashes once per second.
The two steps "Making
Switching on Mobile communication system vis-
phone 2 ible" and "Searching for commu-
nication system" are subject to a
Pairing
Pairing
phone, it may be necessary
to also confirm establishment
of an automatic connection z
or generally carry out a final
confirmation.
Press and hold button 2 until a
low confirmation tone sounds
and the red LED 4 beings to
Press the ON button twice in
flash.
not too rapid succession so
The communication system
that the systems reconnect.
switches off and the red LED
flashes three times.
Switching on systems
Switch on all systems involved.
The system detect each other
and no further steps are re-
quired.
8
92
Pairing
As an alternative to establishing
z a connection to the audio sys-
tem, the 2 button on the com-
munication system can quickly
be pressed consecutively to re-
connect the systems to each
other.
Radio
Reception ranges FM, AM and WB
9
93
Wavebands
FM 87.7...107.9 MHz
AM 530...1710 MHz
Station memory Twelve system memory slots and twelve personal
Technical data
memory slots for each waveband
MP3
MP3 standard MPEG1 Layer 3
Sampling rate 32 / 44.1 / 48 kHz
z
Bitrates 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192,
224, 256 kbit/s
Bluetooth
9 Frequency range 0.02...20 kHz
94
Supported standards 1.2 and 2.0
Profiles A2DP, SPP
Loudspeaker
z Impedance 4Ω
Output power 15 W, RMS, per speaker unit
Frequency range 0.02...20 kHz
Appendix
10
95
Appendix
z
Certifications
Česky English
Alpine Electronics Inc. tímto prohlašuje, že tento Hereby, Alpine Electronics Inc., declares that this
PF240009 je ve shodě se základními požadavky a PF240009 is in compliance with the essential
dalšími příslušnými ustanoveními směrnice requirements and other relevant provisions of
1999/5/ES. Directive 1999/5/EC.
Dansk Español
Undertegnede Alpine Electronics Inc. erklærer Por medio de la presente Alpine Electronics Inc.
herved, at følgende udstyr PF240009 overholder declara que el PF240009 cumple con los requisitos
de væsentlige krav og øvrige relevante krav i esenciales y cualesquiera otras disposiciones
direktiv 1999/5/EF. aplicables o exigibles de la Directiva 1999/5/CE.
Deutsch Ελληνική
Hiermit erklärt Alpine Electronics Inc., dass sich das ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Alpine Electronics Inc.
Gerät PF240009 in Übereinstimmung mit den ΔΗΛΩΝΕΙ ΟΤΙ PF240009 ΣΥΜΜΟΡΦΩΝΕΤΑΙ
grundlegenden Anforderungen und den übrigen ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
einschlägigen Bestimmungen der Richtlinie ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/EG befindet. 1999/5/ΕΚ.
Eesti Français
Käesolevaga kinnitab Alpine Electronics Inc. Par la présente Alpine Electronics Inc. déclare que
seadme PF240009 vastavust direktiivi 1999/5/EÜ l'appareil PF240009 est conforme aux exigences
põhinõuetele ja nimetatud direktiivist tulenevatele essentielles et aux autres dispositions pertinentes
teistele asjakohastele sätetele. de la directive 1999/5/CE.
Certifications
Italiano Magyar
Con la presente Alpine Electronics Inc. dichiara che Alulírott, Alpine Electronics Inc. nyilatkozom, hogy a
questo PF240009 è conforme ai requisiti essenziali PF240009 megfelel a vonatkozó alapvetõ
ed alle altre disposizioni pertinenti stabilite dalla követelményeknek és az 1999/5/EC irányelv egyéb
direttiva 1999/5/CE. elõírásainak.
Latviski Polski
Ar šo Alpine Electronics Inc. deklarē, ka PF240009 Niniejszym Alpine Electronics Inc. oświadcza, że
atbilst Direktīvas 1999/5/EK būtiskajām prasībām PF240009 jest zgodny z zasadniczymi wymogami
un citiem ar to saistītajiem noteikumiem. oraz pozostałymi stosownymi postanowieniami
Lietuvių Dyrektywy 1999/5/EC.
Šiuo Alpine Electronics Inc. deklaruoja, kad šis Português
PF240009 atitinka esminius reikalavimus ir kitas Alpine Electronics Inc. declara que este PF240009
1999/5/EB Direktyvos nuostatas. está conforme com os requisitos essenciais e
Nederlands outras disposições da Directiva 1999/5/CE.
Hierbij verklaart Alpine Electronics Inc. dat het Slovensko
toestel PF240009 in overeenstemming is met de Alpine Electronics Inc. izjavlja, da je ta PF240009 v
essentiële eisen en de andere relevante bepalingen skladu z bistvenimi zahtevami in ostalimi
van richtlijn 1999/5/EG. relevantnimi določili direktive 1999/5/ES.
Malti Slovensky
Hawnhekk, Alpine Electronics Inc., jiddikjara li dan Alpine Electronics Inc. týmto vyhlasuje, že
PF240009 jikkonforma mal-ħtiġijiet essenzjali u ma PF240009 spĺňa základné požiadavky a všetky
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva príslušné ustanovenia Smernice 1999/5/ES.
1999/5/EC.
Certifications
Suomi USA, Canada
Alpine Electronics Inc. vakuuttaa täten että FCC WARNING
PF240009 tyyppinen laite on direktiivin 1999/5/EY Changes or modifications not expressly approved
oleellisten vaatimusten ja sitä koskevien direktiivin by the party responsible for compliance could void
muiden ehtojen mukainen. the user’s authority to operate the equipment.
Svenska NOTICE
Härmed intygar Alpine Electronics Inc. att denna This equipment complies with FCC/IC radiation
PF240009 står I överensstämmelse med de exposure limits set forth for uncontrolled
väsentliga egenskapskrav och övriga relevanta equipment and meets the FCC radio frequency
bestämmelser som framgår av direktiv 1999/5/EG. (RF) Exposure Guidelines in Supplement C to
Íslenska OET65 and RSS-102 of the IC radio frequency
Hér með lýsir Alpine Electronics Inc. yfir því að (RF) Exposure rules. This equipment has very low
PF240009 er í samræmi við grunnkröfur og aðrar levels of RF energy that it deemed to comply
kröfur, sem gerðar eru í tilskipun 1999/5/EC. without maximum permissive exposure evaluation
(MPE). But it is desirable that it should be installed
Norsk
and operated with at least 20cm and more
Alpine Electronics Inc. erklærer herved at utstyret
between the radiator and person’s body (excluding
PF240009 er i samsvar med de grunnleggende
extremities: hands, wrists, feet and ankles).
krav og øvrige relevante krav i direktiv 1999/5/EF.
United Arab Emirates
Product name: MCR, Model name: K48/K52
Taiwan
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商
號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。
N25-MRBE002A 第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信
Name of applicant: Alpine Eletrconics Inc. Japan
;經發現有干擾現象時,應立即
Code of applicant: N25
停用,並改善至無干擾時方得繼續使用。
Model name: MCR K48/K52
前項合法通信,指依電信法規定作業之無線電通信。
Produced by: Alpine Electronics Manufacturing Of
低功率射頻電機須忍受合法通信或工業、科學及醫療用電
Europe, Ltd. Vendel Park, Budai utca 1,
波輻射性電機設備之干擾。
H-2051 Biatorbagy, Hungary
Thailand
This telecommunication equipment conforms to
technical standard NTC technical.
A Random playback, 30 O
Abbreviations and symbols, 4 USB stick, 28 Operating panel
Overview, 7
11
Audio system
Position on vehicle, 5, 6 H Position on vehicle, 5, 6 101
Selecting playback source, 12 Handlebar operating unit Overviews
Switching off, 12 Overview, 8 Display with satellite radio, 20
Switching on, 12 Position on vehicle, 5, 6
P
Index
B I Pairing, 32
Bluetooth, 31 iPod, 28
Additional functions, 34 Connecting, 26 R z
Radio
Pairing, 32 Finding and saving radio
L
Switching on, 31 Loudspeaker stations, 16
Relationship to Bluetooth, 13 Playing stored station, 18
C
Switching off, 14 Selecting the band, 16
Communication systems, 31
Additional functions, 34 Radio Data System RDS, 19
M
E MP3 player, 29 S
External audio devices Adjusting volume, 15 Satellite radio
Connecting, 10, 11, 26 Connecting, 26 Availability, 20
Data memory, 28 Multifunction display, 5, 6 Calling stored station, 23
iPod, 28 Overview, 9 Display overview, 20
MP3 player, 29 Displaying ESN, 25
N Information in display, 20
Operating, 29
Notice concerning current Saving station, 22
status, 4
Selecting station, 21
11 Signal strength, 20
102 Status messages, 25
Subscribing to station, 20
Sound settings, 14
Storage compartment, 10, 11
System settings, 19
Index
T
z Technical data, 93
Standards, 4
U
USB stick, 28, 29, 30
Connecting, 26
V
Volume
Adapting to speed, 15
Adjusting, 13
Muting, 14
Details described or illustrated in Original operating instructions,
this booklet may differ from the printed in Germany.
BMW Motorrad product`s actual
specification as purchased, the
accessories fitted or the national-
market specification. No claims
stemming from these differences
can be recognized.
Dimensions, weights, fuel con-
sumption and performance data
are quoted to the customary tol-
erances.
The right to modify designs,
equipment and accessories is
reserved.
Errors and omissions excepted.
*01418551487*