Professional Documents
Culture Documents
Large Vol P-Z513-eng 2 2017
Large Vol P-Z513-eng 2 2017
LABORTECHNIK
...
'"
"
...
'~
\,
-
Intelligent Centrifuges
F or applications requiring
high speed performance
or the ability to accomodate
Z513
The Z 513 is a universal, high
capacity bench top centri-
blood bags or a large variety fuge. A continuous air flow
of different tube sizes, the through the centrifuge
centrifuges Z 513 and housing prevents sampie
Z 513 K can handle the job. heating and restricts sampie
temperature from rising over
The operating system of 12°C, even at max. speed.
these centrifuges is based on When the rotor is not
advanced, easy to use, running an additional
microprocessor technology ventilating fan assists in
and automatie rotor cooling process.
recognition.
Operation
Flexible and intelligent The ergonomicallydesigned
The LED on the front panel control panel combins
displays either rotor speed advanced microprocessor
(in rpm) or g-force (RCF). control and easy to adjust
If a speed is selected that knobs.The set parameters
exceeds the instalied rotor's (speed, time and tempera-
max. rating, the centrifuge ture) remain in memory
will automatically correct after completion of a run,
the setting to the rotor's allowing for repetive runs
max. speed without simply by pressing"start".
terminating the run. This
important safety-feature Preset I AetuaI Display
eliminates the possibility The large LED constantly
of over-speed. displays the actual rotor
This feature for accurate speed in rpm, while the
calculation and display of smaller LED shows the set
g-force. speed. For indieation of
centrifugal force just press
Program Memory "RCF" key during or before
,B"
For routine works the
a run. I
Z 513 I Z 513 K give you the
possibility to program and Coarse and Fine Adjustment
_.-
store 10 complete centrifuge Control
runs. All parameters (speed, Two knobs are provided for
rcf ect.) can be stored and
recalled at the touch of a
button, saving valuable time.
coarse and fine adjustment
of speed. The knob on the
left allows for coarse adjust- 11 .:.
rlll
-
mm
=6
ment 500 rpm increments.
.
Automatie lid lock
The lid needs only to be set
gently when closing the
centrifuge. The motor driven
lid locking system then
finishes the job. This
The knob on the right allows
a more precise adjustment in
10 rpm increments.
_ fB
- --
lIImiI
_ .11:.
CI!!I:II II:!I:II
11
-~ ..
Centrifuge Z513 Z 513 K
Performance Data
Max. speed 12.000 rpm
Max. RCF 16.904x g
Max. volume 4 x 1000 ml
Dimensions
Unit (W/H/D) 6l!46,5/73 ems 79/46,5/73 ems
Accessories
Safety-Chassis
working-height 70 ems 274.98 VOI 277.98 VOl
incl. Centrifuge
working-height II 0 ems 274.98 V02 277.98 V02
incl. Centrifuge
HERMlE
LABORTECHNIK
HERMLE Labortechnik
GmbH
Gosheimer Straße56
78564Wehingen
Phone +49.7426.9622.50
Fax +49.7426-9622.49
E.mail:hermle@hermle.biz
Internet:h"p://www.hermle.biz
Technicalmodilicationrightsreserved. Version 1/2003