Professional Documents
Culture Documents
Short Operating Manual For Vehicle Test Lane
Short Operating Manual For Vehicle Test Lane
Short Operating Manual For Vehicle Test Lane
Description of display Normal operation brake testing Normal operation brake test stand
Single wheel measuring Start test stand Measuring operation
Single wheel measuring Switching off criteria
• Left ON • Slip control
• Right ON • Sensoring rollers top
or
Axle measuring
Axle measuring • Manual termination by
• Automatic button STOP button
• Brake force after brake
testing longer than 6
seconds at the level of the
roller resistance
Saving arrow lamps flashes during
• Front axle roller resistance measuring
• Rear axle Ovality measuring
or or • Parking brake • Brake forces left and right
Repeated display larger than 500 N
• Front axle • The last three
• Rear axle measurements are saved
+ or or • Parking brake
A Main switch Printout via printer box
B Function keys Standard printer
C IR receiver • Olivetti DM 109 Entry of weight
D Brake force scale in [kN] and road grip in [%] • Seikosha SP-2400 • Overwriting of weight is
E Side slip measuring scale in [mm]
Four wheel measuring possible
F LED difference
• Change also possible after
G LED slip right Attention:
printout, as long as no
H LED slip left • pedal force sensor is necessary
new saving took place
I Pointer brake force left • only single wheel test is possible
J Pointer brake force right • Saving buttons for total
left wheel measuring Start test left side weight and axle weight
K Pictogram test devices,
Efficiency Z[%], axle weight, ovality Input buttons exist
• Single wheel measuring
L Brake force difference in F[%], ovality
• Both rollers starts with different
+ directions
Save left side + Display of current weight
• Front axle Saving button • LCD, right pointer
or total weight • 1,000 N = 1,000 kg
or • Rear axle
Start test right side
right wheel measuring
• Single wheel measuring
Saving button axle weight
• Both rollers starts with different
+ directions
End superautomatic
or
1. 2. 3. 5. 6.
Arrows flashing
Brake test: complete sequence for front axle / standard procedure + ovality measurement
1. 2. 3. 4. 5.
Intelligent control via brake pedal – delete / repeat measurement without pressing button
1. 2. 3. 4. 5.->2.
Intelligent control via brake pedal – stop measurement without pressing button
1. 2. 3. 4. 5.