Professional Documents
Culture Documents
MLaccessories Diffusers 2017
MLaccessories Diffusers 2017
• Ideal when the exact length of an ML or MLR diffuser is not known • The field cut ML or MLR diffuser is 72 inches long, with the sides pre-
until it is being installed punched to assure the proper alignment of field installed spacers.
• Standard factory cut diffusers can be trimmed up to 6 inches. If more These field installed spacers provide additional rigidity during and
than 6 inches are to be removed, use the optional field cut diffuser. after cutting.
MITERED CORNERS
Available Models:
MC-37 / ½” Slot
MC-38 / ¾” Slot
MC-39 / 1” Slot
DIMENSIONS FOR 90° MIITERED CORNERS
F
No. of 1A, 1B 2A, 4, 7A 2B, 7B 3, 6, 11 9A 9B 12, 15 22
Slots O D O D O D O D O D O D O D O D
D = Duct Size
D = Duct Size
O
PLENUMS W 1⅛" L
Available Uninsulated Models: A
Optional
MP-37 / ½” Slot
Internal
MP-38 / ¾” Slot ½" B Insulation
MP-39 / 1” Slot H (MPI Models)
MP-37-SP / ½” Slot Optional
MP-38-SP / ¾” Slot (MP-SP
MP-39-SP / 1” Slot Note: End caps are not insulated. Design)
ACCESSORIES
BLANK-OFFS
Available Insulated Models:
MPI-37 / ½” Slot BLKS / Cold Rolled Steel
MPI-38 / ¾” Slot / Fits over Neck
MPI-39 / 1” Slot / Black Finish
Furnished in 6-foot lengths.
BLKV / Vinyl
Field installed.
MPI-37-SP / ½” Slot / Fits in Slot
MPI-38-SP / ¾” Slot / Black Finish
MPI-39-SP / 1” Slot