Professional Documents
Culture Documents
Instruction Sheet Is Av2822: - Style Number Av2822Bn:: Package Contents
Instruction Sheet Is Av2822: - Style Number Av2822Bn:: Package Contents
Instruction Sheet Is Av2822: - Style Number Av2822Bn:: Package Contents
I
J
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 20 - 30 minutes
● Tools Required for Assembly (not included) : Flathead Screwdriver , Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses & 4, 100 Watt, Type - A Medium Base Bulbs.
● Helpful Tools (not included) : Wire Strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : AV2822BN
STEP 1 :
a. Unfold Support Arms at 120 degree locations.
b. Attach the Ring onto Tabs on the Side Arms. Using
screwdriver, thread Pan Head Screws into mounting holes
on the Ring and tighten until snug to secure it.
Side Arm
Pan Head
Screw
Tab
Ring
STEP 2 :
a. Determine the Rods to be assembled according to your
desired hanging height. 6” Rod
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Fixture Assembly 6” Rod
together as shown. Tighten until snug.
12” Rod
12” Rod
Fixture Assembly
STEP 3 :
Ceiling Canopy
a . Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
b . Thread the Swivel onto the top end of the Upper Rod and Swivel
hand tighten until snug.
Supply Wire with
Ground Wire
Upper Rod
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : AV2822BN
Outlet Box
Outlet Box Screw
STEP 5 :
a . Locate the Ceiling Canopy onto the Crossbar and slip the
Button Stop on the end of Lanyard into the Slot on the Crossbar
Crossbar as shown. Slot
Button Stop
Lanyard
Ceiling Canopy
STEP 6 :
* Use Wire Connectors ( not supplied ) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a . Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b . Connect the House White ( or Ribbed ) Wire to the
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
Fixture Supply Wire ( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box . FROM HOUSE FROM FIXTURE
STEP 7 :
a . Place the Ceiling Canopy onto Outlet Box aligning 2
holes in the Ceiling Canopy with 2 Mounting screws Outlet Box
threaded on the Crossbar and secure it against wall Mounting
with Mounting Balls . Screw
Ceiling
Canopy
Mounting Ball
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : AV2822BN
STEP 8 :
a . Screw the hex nut end of the Center Stem Assembly with
Flexible Hose into the hex coupling underside of the Socket Collar
Socket Cluster. Hand tighten until snug.
b. Pass the Shade, the Small Cap and the Lock Washer (1/8
IP) over the end of the Center Stem Assembly with Flexible Center Stem
Hose. Secure by threading the Hex Nut onto the stem. Shade Assembly with
Flexible Hose
Tighten gently until snug.
c. Pass the Cap over the end of the Center Stem Assembly
and secure with the Finial. Hand tighten until snug.
STEP 9 :
a . Install correct bulbs referring to fixture markings and / or labels for maximum wattage .
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
4 OF 4