Professional Documents
Culture Documents
Instruction Sheet Is Av239: - Style Number Av239Bn:: Package Contents
Instruction Sheet Is Av239: - Style Number Av239Bn:: Package Contents
Instruction Sheet Is Av239: - Style Number Av239Bn:: Package Contents
G
H
I
J
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 20 - 30 minutes
● Tools Required for Assembly (not included) : Flathead Screwdriver , Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses & 2, 100 Watt, G40 Medium Base Bulbs.
● Helpful Tools (not included) : Wire Strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : AV239BN
STEP 1 :
a. Pass the Supply Wires through the 8” Rod, Nipple, Bar and
8” Rod with Knob in turn.
b. Screw the nipple on the end of the 8” Rod into the Mounting 8” Rod with Knob
Holes on the Socket Assembly. Hand tighten until snug.
c. Screw the Nipples into the top ends of 8” Rod and then
pass the Bar over the Nipples.
d. Screw the ends of 8” Rods with Knob onto the Nipple and Bar
hand tighten until snug to secure the Bar. Nipple
8” Rod
STEP 2 :
a. Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires through the chosen Rods and then 6” Rod 6” Rod
thread Rods and 8” Rods with Knob together as shown.
Tighten until snug.
Knob
8” Rod
with Knob
STEP 3 :
a . Disassemble every single parts pre-assemled on the Ceiling Canopy
Ceiling Canopy as shown in the illustration.
Swivel
Hex Nut
Mounting Tag
of Lanyard Lock Washer
Lock Washer
Ceiling
Canopy
Swivel
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : AV239BN
Upper Rod
Outlet Box
Outlet Box Screw
STEP 6 :
a . Locate the Ceiling Canopy onto the Crossbar and slip the
Button Stop on the end of Lanyard into the Slot on the Crossbar
Crossbar as shown. Slot
Button Stop
Lanyard
Ceiling Canopy
STEP 7 :
* Use Wire Connectors ( not supplied ) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a . Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b . Connect the House White ( or Ribbed ) Wire to the
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
Fixture Supply Wire ( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box . FROM HOUSE FROM FIXTURE
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : AV239BN
STEP 8 :
a . Place the Ceiling Canopy onto Outlet Box aligning 2
holes in the Ceiling Canopy with 2 Mounting screws Outlet Box
threaded on the Crossbar and secure it against wall Mounting Ceiling Canopy
with Mounting Balls . Screw
Mounting Ball
STEP 9 :
a . Pass the Glass Collar and the Shade over the Socket as
shown. Secure by threading the Socket Collar onto the
Socket. Hand tighten until snug.
Socket
Glass Collar
Shade
Socket Collar
STEP 10 :
a . Install correct bulbs referring to fixture markings and / or labels for maximum wattage .
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
4 OF 4