Professional Documents
Culture Documents
1 User Manual PBF v05
1 User Manual PBF v05
User Manual
PBF Series
(Versiyon: 2019.10.03)
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 1
Machine Features
Contact Address
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 2
Machine Features
Preamble
This user manual is issued for user (business owner), machine
operator and maintenance personnel.
It must be kept by the user during lifetime of the machine. If
machine is moved to another place or sold to another user, it
must be transferred to the person who is responsible for the
delivery of the machine.
Safety
This user manual contains operational safety information,
which is important in order to prevent sanitary hazard and vital
injuries. Read Machine and Human Safety section.
Usage Area
Press Brake, which is introduced in this user manual, is
designed for bending of metal and other components.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 3
Machine Features
Contents
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 4
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 5
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 6
Machine Features
2019-10-03 7
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 8
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 9
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 10
-
Motorleistung - Potencia del motor
Potenza Motore - Moteur
durmazlar Motor
Silnik
-
-
Moottori
Motorkapasitet
Motoreffekt - Motorvermogen
Faz - Phase
LI - MANUFACTURING YEAR Stromart - Fase
- AÑO DE FABRICACIÓN Fasi - Phase
OSTRUZIONE - ANNEE FABRICATION Fáze
´ ´ faz
Ilosc
-
-
Vaihe
Fase
~
BY VALMISTUSVUOSI
UKCJI
INGSÅR
-
-
-
BYGGEÅR
BOUWJAAR
Machine Features Antal faser
Frekans
-
-
Phase
Frequency
- MACHINE NO Frequenz - Frecuencia
Frequenza - Frequence
N°DE SERIE
A
-
- N'DE SERIE
Frekvence
Czestotliwosc´´
-
-
Taajuus
Frekvenz
Hz
ÍSLO - VALMISTUSNUMERO Frekvens - Frequentie
SZYNY - MASKINNR. Çalışma gerilimi - Working voltage
MER - SERIE-NUMMER Betriebsspannung - Voltaje de trabajo
- CAPACITY Voltaggio - Tension d'alimentation
Pracovní napetí - Jännite V
-
-
CAPACIDAD
CAPACITE 3 Napiecie zasilania
Driftspänning
-
-
Driftsspenning
Bedrijfsspanning
- TEHO
- KAPASITET Kumanda gerilimi - Command voltage
Steuerspannung - Voltaje de dominio
- CAPACITEIT -
Tensione comandi Tension de commande
-
-
STROKE
CARRERA
Rídící napetí
Napiecie sterowania
-
-
Ohjausjännite
Styrespenning
V
- COURSE Manöverspänning - Stuurspanning
- ISKUNPITUUS mm Akım - Current
- SLAG Nennstrom - Intensidad
Assorbimento - Intensité
YISI
-
-
SLAG
STROKE IN A MINUTE
Proud - Virta A
Prad - Nettstroem
PRO MIN. - GOLPES POR MINUTO Driftströmstyrka - Netspanning
MINUTO - COUPS PAR MINUTE Ara sigorta akımı -
- ISKULUKU - Corte de corriente
MINUTE - SLAGANTALL PR. MIN. Fusibile intermediario - Puissance totale
T - AANTAL SLAGEN/MIN Strední proud -
Zabezpieczenie pradowe -
Nimellisvirta
Total hovedsikring
A
SİTESİ -
APAZITÄT -
LUBRICANT CAPACITY
Grounding Label
Huvudsäkring
Elektrik devre no
-
-
Hoofdzekering
E. circuit scheme no
SERBATOIO - CAPACITE RESERVOIR E, schaltplan - Circuito E, esquema n°
ÁPLN - ÖLJYMÄÄRÄ lt Schema elettrico n° - Circuit E, Schéma n°
SC´ ZBIORNIKA - KAPACITET OLJETANK El. schèma Kytkentäkaava
ENS RYMD
AĞIRLIĞI
-
-
TANK INHOUD
TOP TOOL WEIGHT
4 Nr maszyny
Elschemats nr.
-
-
-
E.skjaltplan nr.
Schema no
- PESO DEL PUNZÓN
- POIDS DU POINSON
T H.NÅSTROJE - YLÄTYÖKALUN PAINO Kg
RZ. GÓRNEGO - VEKT OVERVERKTOEY
TYGETS VIKT - GEWICHT BOVENSTEMPEL
AĞIRLIĞI - BOTTOM TOOL WEIGHT Tel : +90 224 219 18 00 pbx. Fax : +90 224 242 75 80
- PESO DE LA MATRIZ
- POIDS DELA MATRICE
T S.NÁSTROJE - ALATYÖKALUN PAINO Kg
RZ. DOINEGO - VEKT UNDERVERKTOEY
RKTYGETS VIKT - GEWICHT MATRIJS ETIKET-2
- WIDTH
- ANCHO
A - LARGEUR
- LEVEYS mm
C´ - BREDDE
- BREEDTE
- LENGTH
- LARGO
A -
-
LONGUEUR
PITUUS Electricity
mm Warning Label
- LENGDE
- LENGTE
- HEIGHT
-
-
ALTO
HAUTEUR
5
- KORKEUS mm
Ć - HOEYDE
- HOOGTE
- WEIGHT
- PESO
- POIDS
T - PAINO Kg
- VEKT
ETIKET-4
T - GEWICHT
Label that showsETIKET-3
turning direction of machine
DURMAZLAR MAKİNA SANAYİİ ve TİCARET A.Ş.
Organize Sanayi Bölgesi 75. Yıl Bulvarı BURSA / TÜRKİYE
Tel : +90 224 219 18 00 pbx. Fax : +90 224 242 75 80
MADE IN TURKEY6
ETIKET-1
Hydraulic system leakage warning label. High pressure lubricant might cause serious injuries. Before
doing anything about the leakage, reduce the pressure first.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 11
Machine Features
Warning. Hydraulic lubricant amount must be between the red line and the black line on the lubricant
indicator.
9
Protect yourself from the danger of being stuck between upper tool and workpieces.
10
Don’t forget that the piece to be bended will raise during the operation, therefore protect your body
from a hit of the workpiece.
11
Don’t place your hand between the upper and lower tools during the operation.
12
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 12
Machine Features
13
Falling Time After Stopping
Nachlaufzeit -
Tempo discesa dopo lo stop - Temps ecoule apres arret
Doba k zastavení - Pysähdysaika ms
Czas zatrzymania belki - Foelgetid
Tidsfördröjning vid nödstopp - Nalooptijd
Traversing Distance After Stopping
Nachlaufweg - Recorrido despues de parar
Movimento dopo lo stop - Distance parcourue apres arret
Dojezd po zastavení - Pysähdysmatka mm
Droga zatrzymania - Foelgevei
Fallrörelse vid nödstopp - Naloopweg
Safety Distance
Sicherheitabstand - Distancia de seguridad
Distanza di sicurezza - Distance de securite
Vzdálenost nad plechem - Turvaetäisyys
mm
Odleglosc
´ ´ bezpieczna - Sikkerhetsavstand
Säkerhetsavstånd - Veiligheidsafstand
14
DO NOT OPEN MACHINE
ETIKETTE-6
IS TURNED OFF.
ETIKETTE-8
Hydraulic system warning label; do not touch or adjust the valves on the machine’s hydraulic system.
Before operating the machine, be sure that the hydraulic lubricant is at an appropriate level, and check
the motor’s direction of rotation. Our lubricant recommendation is ISO VG32-VG 46.
15
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 13
Machine Features
16
No lubricant in reservoir. Do not operate the machine without filling it with enough lubricant.
17
Saving a person who is trapped between machine molds; if there is no power on the machine; grab the
upper table with forklift from the hole on upper table with a crane. Then, disassemble the valves on
hydraulic blocks and raise the table.
18
The tag illustrating the lifting point on the machine. Location is next to lifting lug.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 14
Machine Features
19
Before maintenance depressurized the hydraulic system. Location is on the hydraulic system.
20
Do not enter rear danger area of machine while in operation. This situation causing bodily injury even
dead. It is the employer’s responsibility. Location is rear of the machine.
21
‘Trip hazard’. Location is back gauge system because of x-axis movement cause trip hazard.
22
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 15
Machine Features
Prohibited Applications
▪ No connection except the electric scheme should be
done and no material should be used except the ones
that were indicated on the scheme.
▪ Main switch locked on the panel is being used. When
the panel is open, machine doesn’t run. Never work on
the machine when panel cover is open.
▪ Do not bypass the lateral and rear protection cover
switches.
▪ Never cancel the rear photocells.
▪ Do not change the adjustments of pressure safety
valves on hydraulic system.
▪ Never bypass the frontal safety system on the
machine.
▪ Do not change the speed adjustments and machine
parameters.
▪ Do not leave the tools fixation screws loosened.
▪ Lower tool must be precisely aligned with its center.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 16
Machine Features
Figure 1
Figure 2
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 17
Machine Features
Figure 3
Figure 4
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 18
Machine Features
Figure 5
Figure 6
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 19
Machine Features
Bending Speed
Return Speed
Motor Power
Throat Depth
Approach
Between
Columns
Distance
Tonnage
Capacity
Bending
Bending
Oiltank
Weight
Length
Length
Height
Stroke
Width
Speed
Type
PBF 30120 120 3050 2550 100 9 77 180 250 11 150 3750 1230 2400 5780
PBF 30200 200 3050 2550 100 7 73 210 250 15 150 3750 1390 2500 8160
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 20
Machine Features
Optional Accessories
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 21
Machine Features
Noise
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 22
Machine Features
Unloaded
Machine Name Working
( dBA )
60 TON 70
120 TON 71
200 TON 72
Standard Name
EN ISO 13850: 2015 Safety of machinery – Emergency stop – Principles for design
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 23
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 24
Machine Features
Figure 7
Figure 8
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 25
Machine Features
2019-10-03 26
Machine Features
RIGHT
WRONG
Figure 9
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 27
Machine Features
Strage Conditions
The machine is delivered by being taken under protection so as
not to be damaged during transportation.
If the machine is to be stored for more than one month, the
following issues should be taken into consideration:
▪ During transportation, the upper tool of the machine is
seated onto the V channel of the lower tool. Machine
should preserve this position.
▪ If the machine is to be stored in a humid environment,
dehumidifying materials should be placed on the
electrical panel and the hydraulic control block, the
electrical equipment should be protected from the
humidity.
▪ Protective lubricant should be used in order to prevent
the rusting of the lower and the upper tools.
▪ The machine should be protected from excessive
sunlight.
▪ Storing in open area (in rainy environment) should be
avoided. The valve sockets may be damaged or the
electrical system may be harmed.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 28
Machine Features
Machine Installation
A special protective against rusting is applied to the stoned
surfaces of the tools. The protective can be easily cleaned by a
suitable cleaning substance.
Cleaning process: After wrapping the tools by a wet fabric, wait
for 10 minutes and then wipe by means of a clean fabric. Petrol
or Tri lubricant solvent should be used.
The connection bolts of the machine to the ground should be
supported by metal pieces. The dimensions of these pieces are
declared optionally. The machine should be fixed to the ground
by anchorage bolts. Before the fixation process, the concrete
should be made compliant to the machine. Moreover, using
bolts with the required sizes and quality, this process can be
realized. The machine should be checked by means of sensitive
balance apparatus (water balance). The advised balance points
are the center and the two ends of the table. By the placement
of the balance apparatus into the center of the table and by
balancing on both sides of the table longitudinally, the front-
back adjustment and the length adjustment of the machine are
realized and the machine is balanced. The balance of the
machine is adjusted by the tightening and loosening of the
bolts which are placed separately in each leg. THE BODY OF
THE MACHINE SHOULD NOT BE SUBJECTED TO BE TWISTED IN
ANY CASE. In order to provide correct parallelism, the body
should not be twisted. Non-parallelism should be eliminated
from the support pieces which support the machine and which
are parallel to each other (right and left).
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 29
Machine Features
°C °F
100
210
90
190
80
170
70
150
60
130
50
110
40
90
30
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 30
Machine Features
Electrical Connections
2019-10-03 31
Machine Features
2019-10-03 32
Machine Features
kW
q q q q q
HP
A A mm² A A mm² A A mm² A A mm² A A mm²
Table 1
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 33
Machine Features
▪ Place the scale plate under scale bolts. The scale of the
machine breaks down due to bolts will be stuck to the
ground by the time of progress.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 34
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 35
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 36
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 37
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 38
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 39
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 40
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 41
Machine Features
Lubricant Information
Hydraulic Lubricant Selection
Before the machine is installed, the required hydraulic
lubricant should be filled until the levels illustrated in the
lubricant level display.
(Please look at Table 2 )
Hydraulic If If If
Lubricant Enviroment Enviroment Enviroment
Temperature Temperature Temperature
is Lower is Between is Higher Than
Than 20°C 20°C – 40 °C 40°C
Standard norm Iso Vg 32 Iso Vg 46 Hydro Oil Hd 68
Aral Vitan Gf 32 Vitan Gf 46
B.P. Hlp-Hm 32 Hlp-Hm 46 Hlp-Hm 68
Caltex-Texaco Rando Oil 32 Rando Oil 46
Esso Nuto H 32 Nuto H 46
Purfina France Hydran 32 Hydran 46
Huile Renault- Olna 32 Olna 46
Elf
Shell Tellus 32 Tellus 46 Tellus 68
Valvoline Ultramax 32 Ultramax 46
Veedol Andrain 32 Andrain 46
Yacco Transhyd 32 Transhyd 46
Gulf Harmony 32 Harmony 46
Aw AW
Castrol Aws 32 Aws 46 Hyspin Aws 68
Mobil Dte 26
Table 2
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 42
Machine Features
2019-10-03 43
Machine Features
-B°
/2
B°
B°
/2
r Figure 10
2019-10-03 44
Machine Features
Die Pressing
In order to obtain sensitive profiles, your tools should be very
good. Here instead of bending in air, big amount of tonnage
usage is required.
V=4-5xs
Figure 11
r = 0.16xV
Figure12
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 45
Machine Features
1,42 L Rm s 2
F =
1000 V
For Instance:
Sheet length 1000 mm.
The breaking off tension of the material 42 daN/mm²
If we choose “ V “ channel V=8 x s, the value we obtain is as
follows.
Sheet Thickness (s) 0,5 – 2,5 3,0 – 8,0 9,0 – 10,0 12,0 and upper
Side Length (b) 0,51 x V 0,55 x V 0,58 x V 0,71 x V 1xV 1,31 x V 1,94 x V
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 46
Machine Features
V α
(mm) 1° 1.5 ° 2° 2.5 ° 3° 3.5 ° 4° 4.5 ° 5°
6 0.031 0.046 0.061 0.076 0.09 0.106 0.121 0.136 0.151
8 0.041 0.061 0.081 0.101 0.121 0.141 0.161 0.181 0.201
9.5 0.048 0.072 0.096 0.12 0.144 0.168 0.192 0.215 0.239
10 0.051 0.076 0.101 0.127 0.152 0.177 0.202 0.226 0.251
12 0.061 0.091 0.122 0.152 0.182 0.212 0.242 0.272 0.301
13 0.066 0.1 0.132 0.165 0.197 0.230 0.262 0.294 0.327
15 0.076 0.114 0.152 0.19 0.228 0.265 0.302 0.34 0.377
16 0.081 0.122 0.162 0.203 0.243 0.283 0.323 0.362 0.402
19 0.097 0.145 0.193 0.241 0.288 0.336 0.383 0.43 0.477
20 0.11 0.152 0.203 0.253 0.304 0.354 0.403 0.453 0.502
24 0.122 0.183 0.244 0.304 0.364 0.424 0.484 0.544 0.603
25 0.127 0.19 0.254 0.317 0.379 0.442 0.504 0.566 0.628
30 0.153 0.23 0.305 0.380 0.455 0.53 0.605 0.679 0.754
32 0.163 0.244 0.325 0.405 0.486 0.566 0.645 0.725 0.804
35 0.178 0.267 0.355 0.443 0.53 0.619 0.706 0.793 0.849
38 0.194 0.299 0.386 0.481 0.577 0.672 0.766 0.861 0.955
40 0.204 0.305 0.406 0.507 0.607 0.707 0.807 0.906 1.005
50 0.255 0.381 0.508 0.633 0.759 0.884 1.01 1.132 1.256
52 0.265 0.4 0.53 0.66 0.789 0.919 1.05 1.178 1.306
55 0.28 0.42 0.56 0.7 0.835 0.972 1.109 1.246 1.382
60 0.306 0.46 0.61 0.76 0.911 1.06 1.21 1.36 1.51
63 0.321 0.48 0.64 0.8 0.96 1.11 1.27 1.43 1.58
70 0.357 0.54 0.71 0.89 1.06 1.24 1.41 1.59 1.76
76 0.387 0.58 0.77 0.96 1.15 1.34 1.53 1.72 1.91
80 0.41 0.61 0.81 1.01 1.21 1.42 1.61 1.81 2.01
100 0.509 0.76 1.0 1.27 1.52 1.77 2.02 2.26 2.51
125 0.637 0.95 1.27 1.58 1.9 2.21 2.52 2.83 3.14
160 0.815 1.22 1.62 2.03 2.43 2.83 3.23 3.62 4.02
200 1.02 1.52 2.03 2.53 3.03 3.53 4.03 4.53 5.02
250 1.27 1.9 2.53 3.17 3.8 4.42 5.04 5.66 6.28
320 1.63 2.4 3.25 4.1 4.9 5.7 6.45 7.25 8.04
400 2.03 3 4.01 5.1 6.1 7.1 8.1 9.1 10
500 2.55 3.8 5.01 6.4 7.6 8.8 10.1 11.3 12.6
630 3.2 4.8 6.4 8 9.6 11 12.7 14.3 15.8
Table 3
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 47
Machine Features
Length: 2500 mm
Sheet thickness: 2 mm
Hardness of the sheet: 45 daN/mm²
The required pressing power 2,5 x 8 x 2 = 40 tones
As mentioned in the last example, for a sheet with hardness
40–45 kg/mm², the required pressing power to 2.5 mm is
given.
If our press brake is used above its capacity, there may be
damages in the tool and in the sheet.
When sheets whose drawing strengths are over 40 kg/mm² are
bended, a 10 % value must be added to the practically
calculated value. The cracks that may be formed may partially
be prevented in this manner.
In harder sheets, this value is taken as 10 – 12 x s and thus the
cracks which may be formed as a result of the hardness of the
sheet may be prevented.
V
+
y
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 48
Machine Features
Bending Diagram
s ( mm )
V b ri
0.5 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 12 15 18 20
6 5 1 2.5 6.5 10
8 6 1.3 2 5 8 11
10 7 1.7 1.5 4 6 9 13
12 9 2 3 5 7 11 16
15 12 2.7 4 6 9 13 16
20 15 3.3 4 7 10 12 19
26 18 4.2 5 7.5 9 14 21
30 22 5 6.5 8 12 19 24
32 23 5.4 7.5 11.6 17 23 30
37 25 5.8 10 14.5 20 26 33
42 29 6.7 13 17 23 29 33.5
45 32 7.5 16 21 27 33 48
50 36 8.3 19 24 30 43 58
60 43 10 20 25 36 49 64
70 50 11.5 21 31 42 55 59
80 57 13.5 27 37 48 60 75
90 64 15 1,42 L Rm s 2 32 42 54 66 95
F= (Ton )
100 71 17 1000 V 38 48 60 86 134
130 93 22 37 46 66 103 149
180 130 30 33 48 75 107 133
200 145 33 43 67 97 119
250 180 42 54 77 95
F: Bending force
L: Length (mm) (L = 1000 mm)
ri: Inner radius
Rm: Breaking off strength of the material ( daN/mm² )
V: Channel width
b: Minimum sheet curling length
s: Sheet thickness
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 49
Machine Features
F = 75 %
F = 62 %
F = 37 %
Figure 13
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 50
Machine Features
Figure 14
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 51
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 52
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 53
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 54
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 55
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 56
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 57
Machine Features
▪ Press F6 button.
▪ Wait for the switch off for the Windows XP
▪ Select OFF position of the Main Switch on the main
electrical Panel.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 58
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 59
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 60
Machine Features
Figure 15
Figure 16
Figure 17
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 61
Machine Features
Figure 18
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 62
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 63
Machine Features
Maintenance Information
▪ Before maintenance depressurized the hydraulic
system. All of the maintenance processes must be
realized when the upper table is in the lower point.
▪ All of the electrical connections should be
disconnected before all of the maintenance processes.
▪ The lubrication points should be lubricated at the
frequencies illustrated in the lubrication table (Figure
20) under normal operating conditions.
▪ If the machine is not to be operated for a long time,
the surfaces which have tendency to be rusted should
be lubricated with a protective lubricant.
▪ The oxidized burrs and the pieces which come out of
the sheet during sheet bending may corrupt the tools
by attaching the lower and the upper tools operating
surfaces. Therefore, the burrs must be cleaned
regularly.
▪ The reductors in the rear stop system must be
lubricated by means of the lubricant illustrated in Table
5 after 2000 working hours.
▪ The oil used in the hydraulics must be replaced by the
Durmazlar Service Team after the first 500 hours of
operation and then 2000 hours of operation. Contact
the Durmazlar Service Department for oil change. (For
oil selection, see Table: 2).
▪ The pressure filter has a sensitivity of 10 microns and
with time, it may be filled with the particles in the filter
system. The pressure filter has mechanical dirt display.
Accordingly, when the display changes from green to
red, it must be changed.
▪ If the machine is not operated continuously, if it is not
used for 3 or 5 months and then it s used again, in such
a case, the waiting duration of the hydraulic lubricant
is taken into consideration. And this leads to a
difference according to the mark and type of the
lubricant used. In this case, the company which
provides the hydraulic lubricant should be contacted
and the lubricant used in the machine should be
tested. However, the sample lubricant that is to be
taken for test from the machine should be taken after
the machine is operated for at least 1 hour. The unit
that realizes the test examines the standard lubricant
characteristics and the sample lubricant values and
according to the test result, the unit will declare that
this lubricant is appropriate for usage or the unit will
declare that the lubricant can not be used. As a result
of the test, a ‘NAS’ contamination value is obtained.
The NAS value of the lubricant used in the machine
should be lower than 9. NAS 7 is a suitable value.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 64
Machine Features
Table 5
NOTE: Below –30 and above +60°, special felt should be used
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 65
Machine Features
Figure 20
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 66
Machine Features
°C °F
100
210
90
190
80
170
70
150
60
130
50
110
40
90
30
Operate the machine if the power LED and guard LED are lit.
In another LED combinations during the test do not operate
the machine.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 67
Machine Features
Trobleshooting Information
Possible Failures
If one of the machine cylinders deflects downward;
Correct position
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 68
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 69
Machine Features
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 70
Machine Features
Crowning System
Manuel Crowning System
2019-10-03 71
Machine Features
Figure 21
The dimension between the lower and the upper points of the
crock springs in the connection bolts of the crowning system is
as mentioned in the table. This value is adjusted according to
the values between 0 – 100. The table values must be checked
in periodical maintenances.
Attention:
Note: The values given in the table 6 are for motorized bending
option. At least these values must be obtained in machines
with manual bending.
Calculated Bending
Bending max.
Load [Ton]/m deflection min.
(tol.0,+0,1)
value (1/3) (tol.±0,02)
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 72
Machine Features
ATTENTION
Safety Instructions
By all means, read the user manual before operating the
machine. Please contact the producer company if you have any
questions concerning the machine.
2019-10-03 73
Machine Features
Unavoidable Risks
▪ Keep your hands away from bending axis while
bending. Keep in mind that the part that is being
bended is going to be elevated as much as the bending
angle, therefore protect yourself from a hit by work
piece. Take into consideration that the bended part
would fall after the operation. Do not change the
machine’s tool adjustments while bending and do not
let the protective cover safety switches be disabled.
▪ Do not approach to the moving parts of the machine
while running Regard the safety distance values.
▪ Never go inside the machine while bending.
Figure 17
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 74
Machine Features
Figure 18
Transportation
Technical precautions
Protection of the user: Provide appropriate ventilation in order
to prevent the product being subject to the vapor or smoke
thereof.
Avoid contact with used or dirty products.
Keep the machine away from the flammable materials.
Keep the machine away from comestibles.
Protection from fire and explosion:Empty tankers may
comprise explosive gas and vapors. After the pouring of the
product, the cloth, paper and other similar materials used in
the collection of the product are flammable.
These should not accumulated, and after being used, they
should be disposed of safely and immediately.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 75
Machine Features
Storing
Technical precautions: Realize the necessary arrangements
and take all the necessary measures in order to prevent the
product to mix into the water and the soil.
Storing conditions
The appropriate method: Store in room temperature, keep
away from water and humidity, keep away from flame sources.
Keep the carriers closed when they are not used.
The factors that need to be avoided: Do not store the
materials that have been subject to the product (cloth, paper,
etc.)
Inappropriate products: It leads to a dangerous reaction with
strong oxidants.
The packaging of the product
Recommended: Only reservoirs, gasket, pipe, etc resistant to
hydro-carbon should be used.
If possible keep it in its original carrier.
Otherwise, place all the markings onto the new carrier
according to the original carrier.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 76
Machine Features
Toxic Information
▪ Strong Toxic / Local Effects
Respiration: It does not have a risk in normal usage.
In respiration, according to the concentration of the vapor, it
may lead to a light irritation in the upper part of the respiration
system.
Contact with the skin: It does not have a risk in normal usage
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 77
Machine Features
Annihilation Information
Annihilation of the wastes : Recycling and the re-using of the
waste lubricants are essential. In cases where this is not
possible, the waste lubricants should be annihilated without
giving harm to human health and to environment. In the case
of recovery or disposal of waste oils , facilities which has
received environmental license within the scope of
Environmental Permit and License Regulation should be used.
Annihilation of the packages: It should be assessed under the
wastes annihilation.
Industrial waste EU number: 13-01-06 (hydraulic lubricants
containing only mineral lubricant)
Local responsibilities: Must be disposed of in accordance with
local and national laws.
Note: The images in the catalogs may vary according to the configurations.
2019-10-03 78