Professional Documents
Culture Documents
Salesgram: Cat L Series Wheel Loaders (950L-980L) 2017 Product Update
Salesgram: Cat L Series Wheel Loaders (950L-980L) 2017 Product Update
Salesgram
January 2017
(Afr-ME, China, SE Asia, S Am, CIS and Turkey)
Cat® L Series
Wheel Loaders
(950L-980L)
2017 Product
Update
2
CPM 2.0 – Advanced Productivity Application Cat Connect Technologies
An optional web based tool powered by CPM 2.0, VisionLink®
Advanced Productivity includes application profiling, cycle
segmentation and transactional payload data. It requires
an Advanced Productivity subscription in VisionLink and
Product Link™ Elite PLE641 cellular telematics hardware.
• Machine data uploads directly to VisionLink, no need for
manual machine downloads with VIMS™pc.
• Cycle segmentation and detailed payload data available
in VisionLink.
• Easy list management features for onboard and off board
via VisionLink.
Note: A six month subscription is included with CPM 2.0
purchase. Availability varies by country. Consult your
dealer Product Link Administrator for specific details.
3
Application Profiling
Identifies the following applications:
• Loading
• Load and carry
• Roading
• Pile cleanup
• Waiting, engine off, other
Cycle Segmentation
Provides the following segment breakdowns:
• Back drag
• Dig, dump, partial dump
• Stopped empty, stopped loaded
• Travel empty, travel loaded
• Miscellaneous
• Key off – engine on, key on – engine off
4
CPM 2.0 – Simplified Payload Mode
A new screen with reduced payload content design is available
for customers requiring only scale functionality. Customers can
now switch between simplified and normal modes in the settings
menu (upper right button).
Simplified Mode
Normal Mode
5
Off-board List Management
• Truck and material ID editing is available using Advanced
Productivity/VisionLink.
• Updated entries are transmitted wirelessly to the machine
(requires an Advanced Productivity subscription in
VisionLink and Product Link Elite PLE641 cellular
connection).
• Common truck and material site lists can be downloaded
and uploaded to entire fleet.
6
Operator ID
Operator ID functionality is included as standard and can be
enabled via ET. Upon machine startup, an operator’s specific
passcode can be entered. The machine can be operated without
specifying Operator passcode and the screen will go away after
awhile. A bypass button is available if selecting Operator ID
is not required or desired.
• Key benefit – ability to track operators via VisionLink
Advanced Productivity and through general VisionLink screens.
• Operator ID only records who the operator is and does not
set any settings or preferences.
• Additional configurations are available that work with
Operator ID including:
– Security enable (factory password required) – when
enabled, this prevents machine operation until either a
correct passcode is entered or a registered RFID is used.
{ This is the MSS replacement when used with RFID, but
7
Cat Object Detection*
Integrated Cat Object Detection is a radar system that warns
an operator of an object in critical zone while going in reverse.
• A scalable system composed of camera** and radar designed
to increase perimeter awareness around the machine
• Increased awareness of the working environment enhances
site safety
• Integrates camera** images and radar detections,
medium range: 1-20 m (3-66 ft), 115° viewing angle.
**Cat detect radar system is offered as an enhancement and
should not be relied upon in place of visibility to objects behind
the machine
**Camera is included as standard equipment
0.5 m (1.6 ft) from radar, 1.5 m (5 ft), 0°
Features
• Integrated in standard display
• Easy to upgrade any base machine
• Five proximity warning levels: level one, level two, level three,
critical zone warning, stop zone warning
• Speed based variable zones (no one in the market has
this capability)
• Two alarm modes: continuous alarming, discrete alarming
8
Standard Seat: Seat Back Recline Mechanism Improvement Operator Comfort and Safety
The new seat design includes an improved seat back recline
mechanism to improve seat back rigidity, especially during
directional shifts. The recline setting is simplified and easier to
adjust. As a result, the optional four-point harness is simplified
and symmetric.
Former Seat
Updated Seat
9
Ingress/Egress Lighting
Available kit adds an LED light at the left rear of the cab.
• Light activates along with the rear cab convenience lighting.
– Light comes on when disconnect is on, key is off and cab
door opens.
– Light stays on for two minutes then shuts off.
• Illuminates the platform, steps and ground.
Light Coverage
10
Full LED Lights Package
• Full LED package now available.
• Longer lasting LED lights provide cleaner light output.
Self-adjusting Alarm
11
Beacon Mount Improvement
• Stronger spring and simple up/down position.
Auto Clock
• Auto clock option, in touch screen display, is available in
the clock setting screen.
• Uses local time, as defined by UTC (synced with GPS),
and the time zone configured for Product Link through ET.
• Automatically adjusts for daylight savings time.
Display Settings
12
Cat Autolube System Serviceability
Includes the following:
• Fully integrated into machine, display and VisionLink.
• Ground level access to refill pump located on left side platform.
• Serviceable Cat hoses that are rebuildable/reusable with only
10 mm and 12 mm wrenches.
• Accessible grease zerk placement at inlet of all valves and all
grease points allows simple troubleshooting with grease gun.
• Fault codes are shown on machine display and sent
to VisionLink.
• Increased testing options from machine display.
13
Service Lighting
Kit now available that adds four LED lights to make daily
maintenance more convenient to cover the following areas:
• Left side cooling package
• Right side cooling package
• Transmission sight glass
• Coolant tank
Lights are activated with a switch under the left platform, next
to the hood tilt and remote door opener switch. Once the lights
are activated, they will deactivate after 30 minutes to prevent
battery drain.
14
Cab Simplification (base and deluxe cab packages)
• Lane 2
– Three cab arrangements will be available per model.
– Cab arrangements bundle choices to cover preferences.
– Simplified and shorter Lane 2 price list.
Cab Standard
Includes:
443-4183 Seat Belt, 2" Optional Attachments L2
492-3985 Cab Trim, Basic Radio
Included in all L2 492-3988 Filtration, Standard Mandatory Attachments L2 Warning Beacon
Curved Glass 492-3995 Windows, Standard Implement Controls CPM Payload
No Guards
Cab Deluxe 506-8479 Joystick, 2V, HMU/FNR AutoDig
Non-metallic Roof cover
Includes: Product Link System CPM Ready
Non-metallic HVAC cover
372-1603 Radio, CB (Ready) Lights CPM
Seat
443-4184 Seat Belt, 3" Cab Precleaner
492-3986 Cab Trim, Sun Visor Cat Detect
492-3988 Filtration, Standard
492-3995 Windows, Standard
15
Additional Information For additional information please contact a GCI field rep or
GCI Product Application Specialist.
Asia Pacific:
Dick Mars
Peter Pang
South America:
Gecimar Morini
Global:
Frank Stadelmann
Bryan Vogt
The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require knowledge of such reports and
is intended exclusively for their information and training. It may contain unverified analysis and facts observed by various Caterpillar or dealer employees.
However, effort has been made to provide reliable results regarding any information comparing Caterpillar built and competitive machines. Effort has been
made to use the latest available spec sheet and other material in the full understanding that these are subject to change without notice. Any reproduction
of this release without the foregoing explanation is prohibited.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product
identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
TEKQ1361
January 2017
www.cat.com
© 2017 Caterpillar
All Rights Reserved