Professional Documents
Culture Documents
N5808N0275 - Bs - Cat - Jade 200 - Feb19 - ENG - LR
N5808N0275 - Bs - Cat - Jade 200 - Feb19 - ENG - LR
DE 200
AUTOMATIC SINGLE-SIDED
EDGEBANDING MACHINES
LOW INVESTMENT,
LONG TERM
RELIABILITY
2
JADE 200
BUILT ACCORDING TO THE SPECIFIC PRODUCTION REQUIREMENTS
PERFECT FINISHES WITH EVERY TYPE OF PROCESS
TOP QUALITY FINISHED PRODUCT
GROUND-BREAKING TECHNOLOGY, FOR TOP PERFORMANCE.
3
BUILT ACCORDING
TO THE SPECIFIC
MACHINING NEEDS
Pre-milling Unit Gluing Unit End Trimming Unit Fine Trimming Unit
Corner Rounding Unit Edge Scraper Unit Glue Scraper Buffing Unit
4
JADE 200
The new cabin design makes the machine perfectly ergonomic, for increased
ease and comfort for the operator both during machining and maintenance
operations, with ample room to manoeuvre.
Pre-milling Unit Gluing Unit End Trimming Unit Fine Trimming Unit
5
PRECISION
AND ACCURACY
High product quality and reduced machining times,
thanks to specific solutions created for specific
day-to-day work.
6
JADE 200
7
ROTAX
ELECTRO
SPIN
DLES
EXCLUSIVE TECHNOLOGY
Biesse directly designs and manufactures
all high-tech components for its machinery.
8
9
TOP QUALITY
EDGEBANDING
10
ROVER
JADEB200
FT
PERFECT FINISHING
Technological solutions
for the perfect finish on every
type of machining operation.
11
TECHNOLOGY
EASY TO USE
Simple, user friendly programming
thanks to the touchscreen control panel
at the service of the user.
12
JADE 200
TECHNICAL
SPECIFICATIONS
L
Jade 225 4168 mm - 1641 inch
Jade 240 5213 mm - 2052 inch
The technical specifications and drawings are non-binding. Some photos may show machines equipped with optional features. Biesse Spa reserves the right to carry out modifications without
prior notice.
Weighted surface noise level A (LpfA)87,3 dB (A). Weighted noise level A (LwA) 102,5 dB (A). Measurement uncertainty K = 4 dB (A).
The measurement was carried out in compliance with UNI EN ISO 18217, UNI EN ISO 3746, UNI EN ISO 11202 and subsequent modifications.The noise levels shown are emission levels and do
not necessarily correspond to safe operation levels. Even though there is a relation between emission levels and exposure levels, this cannot be used reliably to establish whether or not further
precautions are necessary. The factors determining the actual noise levels to which the operating personnel are exposed include the length of exposure, the characteristics of the work envi-
ronment, other emission sources (e.g. the number of machines and machining operations nearby). At any rate, the above information allows the operator to better evaluate dangers and risks.
13
SERV
ICE &
PARTS
Direct, seamless co-ordination of service requests between Service and Parts.
Support for Key Customers by dedicated Biesse personnel, either in-house
and/or at the customer’s site.
BIESSE SERVICE
Machine and system installation
and commissioning.
500
Biesse Field engineers in Italy and worldwide.
Training centre dedicated to Biesse Field
engineers, subsidiary and dealer personnel; 50
client training directly at client’s site. Biesse engineers manning a Teleservice Centre.
Software upgrade.
120
training courses in a variety
of languages every year.
14
The Biesse Group promotes, nurtures and develops close and constructive relationships with customers in
order to better understand their needs and improve its products and after-sales service through two dedicated
areas: Biesse Service and Biesse Parts.
With its global network and highly specialized team, it offers technical service and machine/component spares
anywhere in the world on-site and 24/7 on-line.
BIESSE PARTS
Original Biesse spares and spare kits
customized for different machine models.
92%
of downtime machine orders fulfilled
Spare part identification support. within 24 hours.
15
MADE
WITH
BIESSE
BIESSE TECHNOLOGY
ACCOMPANIES THE GROWTH OF STECHERT.
“On these chairs sits the world” is the at their best after only a short training is used. In order to meet the needs of the
motto of the Stechert Group that can period. future, in the Trautskirchen
effectively be taken literally. What began At the start of the production line is the plant there are also two Biesse numer-
60 years ago as a small manufacturing panel saw “WNT 710” with one cutting ically controlled machining centres: a
company for pram mouldings, furniture line. “Because”, explained skilled cabinet “Rover C 965 Edge” and a “Rover A 1332
doors and door locks is today one of the maker Martin Rauscher, “we want to be R”, which are perfectly complementary.
largest international suppliers of con- able to work panels of up to 5.90 metres The Stechert Group also intends to
tract and office chairs, as well as tubular in order to reduce waste as much as strengthen sales of innovative solutions
steel furniture. Moreover, since 2011 the possible.” Normal rectangular panels for for interior fittings, with complete sys-
company has a partnership with WRK tables or wall panels are taken directly tems for walls, ceilings, floors and mez-
GmbH, an international specialist in to the “Stream” edgebander with “Air- zanines. For panel sectioning, the Group
podiums, conference room and grand- ForceSystem” technology. The Biesse has purchased a “Sektor 470”.
stand seating, associated with Stechert edgebander has a group that activates For other geometry, groove and spring
via the joint commercial company STW. the laminated edging material machining as well as boring and surface
For Stechert management, however, the no longer via a laser beam but using hot milling, there are two Biesse machining
excellent results obtained are no excuse air to obtain the so-called “zero gap”. centres, an “Arrow” for nesting applica-
for resting on their laurels. “The quality is just as good as the laser tions, a “Rover B 440” and more recently
On the contrary, the company is invest- system, if not even better: with a con- a 5-axis machine, the “Rover C 940 R”
ing heavily in the Trautskirchen site to nection power of 7.5 kW, the cost per machining centre in order to be able to
make its production even more efficient square metre is much lower”, underlined produce, in particular, wall and ceiling
and profitable. In the search for a new the Biesse Area Manager. panels machined in 3 dimensions.
machinery partner, the company’s man- “We want to be ready for when we mould
agement chose the Italian manufacturer the frame ourselves and we must there- Source: HK 2/2014
Biesse. “For the project we chose ma- fore calibrate the panels” said Martin
chines that already had certain options Rauscher, “The same is true of course
and were predisposed for automation”, for solid wood and multiplex panels,
said Roland Palm, Biesse Area Manager. which require grinding before being
An efficient production cycle was creat- painted in an external company. For
ed in which workers are able to perform both types of work a Biesse “S1” sander
STECHERT.DE
16
THE BIESSE RANGE
FOR LINEAR
EDGEBANDING
EDGEBANDING
Akron 1100 Jade 200 Jade 300 Akron 1300 Akron 1400
EDGEBANDING SQUARING-EDGEBANDING
17
LIVE
THE
EXPERIENC
18
BIESSEGROUP.COM
CE
BIESSE.COM
20