Professional Documents
Culture Documents
Specifications: Specificatlons Hydraulic Crane
Specifications: Specificatlons Hydraulic Crane
SPECIFICATlONS
HYDRAULIC CRANE
CRANE CAPACITY:
HOOK HEIGHT
ABOVE GROUND LEVEL : Max. 17.4m
BELOW GROUND LEVEL : Max. 18.4m with 4-part line
Boom Length
Retracted boom; 3.93m
Extended boom; 15.71m
Boom Extending Speed; 11.78m/28 s
Boom Raising Speed; 1° to 78°/12 s
Wire Rope
Construction (JIS); lWRC 6 × WS( 26)
Diameter × Length; 8mm × 91.5m
Breaking strength; 47.1kN {4800kgf}
-1/W546EKK-
OUTRIGGERS: Vertical jacks and horizontal beams
Outrigger Span
Retracted; 2.19m
Extended; 3.8m
Mid-extended; 3.0m
HYDRAULIC SYSTEM:
Hydraulic Pump
Type; Gear type
Rated pressure; 20.6MPa {210kgf/cm 2}
Rated delivery; 60 l/min.
Rated revolution; 1400rpm
Hydraulic Valves
Control valve; Multiple control valve, spring centered,
spool-type, with pressure relief valve
Pressure relief
valve setting; 20.6MPa {210kgf/cm 2}
CounterbaIance valve; Boom raising and boom telescoping
cylinders
Pilot-operated
check valve; Outrigger cylinders
Hydraulic Actuators
Hydraulic motors; Hoisting: Axial plunger type
Slewing: Axial plunger type
Hydraulic cylinders; Double acting type
1 × Boom raising cylinder
3 × Boom telescoping cylinder
2 × Outrigger cylinder
-2/W546EKK-
SAFETY DEVICES: 1. Pressure relief valve for hydraulic circuit
2. Counterbalance valves for boom raising
and boom telescoping cylinders
3. Pilot-operated check valves for vertical
outrigger cylinders
4. Boom angle indicator with load indicator
5. Hook safety latch
6. Automatic mechanical brake for winch
7. Digital Loadmeter
8. Automatic stop for overwinding
9. Overwinding alarm
10. Alarm buzzer
11. Level
12. Emergency stop button
13. Overloading alarm
Note: The figures in relation to the speed are on the basis of no-load running at rated oil
flow condition.
CT-2178
-3/W546EKK-
WORKING RANGE:
CT-2178
Note: The above figures are based on no-load condition and do not include the deflection of the
boom.
-4/W546EKK-
RATED LOADS:
Unit : kg
Working Boom length
Radius
(m) 3.93m 6.33m 8.72m 11.05m 13.38m 15.71m
15.47 250
( ) : Working radius
CAUTION
1. Fully extend all outriggers on solid, level surface leveling vehicle.
2. Rated loads shown in the chart are based on the crane strength rather than stability.
3. Rated loads shown must be reduced in accordance with vehicle weight, loaded condition of
truck, crane mounting position, wind, ground condition and operating speed.
4. The mass of hook (50kg), slings, and any accessories attached to the boom or loadline must
be deducted from the above rated loads in the chart.
5. In accordance with our policy of constant product improvement, all specifications are subject
to change without notice or obligations.
CT-2178
-5/W546EKK-