aaa
calibration lab
‘st Floor, Office No. 2, Opp. Atika Railway Crossing, Near Rajshri Bajaj,
Gondal Road, Rajkot - 360 002, Ph, 0281 - 2373109
Web : wwwgelr.co.in / Email : germancalibration@gmail.com
CERTIFICATE OF CALIBRATION {ULR-£0206519000004414F
Certificate No, Date of Calibration Due Date Tssue Date Page
‘o0004414/19 14/03/2019 13/03/2020 14/03/2019) Toft
Customer Name: Jakap Metind Pvt. Lid.
Plot No. 3864, Phase Il, Dared, Jamnagar
+: 187, 130372019
Receipt No. / Date : 00307/19, 14/03/2019
Test item : Taper Thread Plug Gauge
u Identity Number
Make : Baker Serial Number : PKR-8673
Size : 1/8x27-NPTF-L1 Least Count :
‘As Received Condition : Ok Ret Standard No. : ANSI B1 20.5 1991
Environmental Condition : Temprature : 20°+2°C Relative Humidity : 50 + 10%
Calibration Method : GCMI17 LabiiD : 0307/1915
Master Details & Traceability
[Seno TT es Calibration Report No. | Valid Up To
| ‘Universal Length Measuring Machine €GIL/2018/0727/C-001 26/07/2020
L Master Setting Ring -C LABICAO4/01/1756 28/05/2020
Uncertainty of Measurement : £3 um
Calibration Result - Effective Pitch Diameter (All Reading are in mm)
Specified Size | Wom Limit | Observed Size
9.4846 19.4945 9.4600 9.4850 / 9.4860
‘The Uncertainty Stated is the expanded uncertainty of measurement obtained by multiplying the standard uncertainty
by the coverage factor K=2 corresponds to confidence level of 95 %
‘This Certificate refers only tothe particular ten () submitted for Calibration.
‘The Calibration results reported inthis Certificate are valid tthe time of & under the stated condition of measurement
‘This Certificate Shall not be reproduced, except in ful unless writen permission from GCL
“Due Date Suggested By Customer
Catorated| ‘Technical Manager
PRCHAVDA P.RCHAVDA,
ceccns
Rev.3.09/0072017efrman
calibration lab
1st Floor, Office No. 2, Opp. Railway Crossing, Near Rajshri Bajaj,
Gondal Road, Rajkot - 360 002. Ph. 0281 - 2373109
Web : www.gelr.co.in / Email : germancalibration@gmail
CERTIFICATE OF CALIBRATION viR.00706519000004415F
Certificate No. Date of Calibration Due Date™ Tssue Date Page
(00004415/19 14/03/2019 19/03/2020 14/03/2019 toft
Customer Name: Jakap Metind Pvt. Ltd.
Address: Plot No, 3864, Phase Il, Dared, Jamnagar
Customer Reference : 187, 13/03/2019
Receipt No. / Date : 00307/19, 14/03/2019
Test item : Taper Thread Plug Gauge
w Identity Number =
Make : Baker ‘Serial Number : PHP-2806
Size : 1/8 x27 -NPTF-L3 [Least Count =
‘As Received Condition : Ok RefStandard No. : ANSI B1.20.5:1991
Environmental Condition : Temprature : 20°+2°C Relative Humidity : 50 + 10%
Calibration Method : GCAWV/17 LabiID : 0307/1916
Master Details & Traceability
A Calraion Report Ne. | Valid Up To
ceiuzoreorz7-a01 2s)o72000
== “Csreaoaoirtrss 2a)osn000
Uncertainty of Measuroment = #3 um
Calibration Result - Effective Pitch Diamator (Al Reading ar in mm)
ww Gauge Plane Specified Size Worn Limit Observed Size
sal End 2.0526 16.0627 20282 9.05887 8.0005
‘he cata Sleds be enended neatly nearer ine by mihi te sandr weet
Dye conrays ast? consonants eel of 6%
This Catt ref ont parca om) sited er Clireon
Te Calton ents oes eGo wv te ne ot unde ste canon ef mesure
Tretia Marapr
P.RCHAVDAGerman
Calibration lab
4st Floor, Office No. 2, Opp. Atika Railway Crossing, Near Rajshri Bajai,
Gondal Road, Rajkot - 360 002. Ph, 0281 - 2373109
4 Web : www.gelr.co.in / Email : germancalibration@gmail.com
'
CERTIFICATE OF CALIBRATION
Certificate No.__| Date of Calibration [Due Date * issue Date Page
GCIJM/19/03/002 14.03.2019 14.03.2020 14.03.2019 | 1 of2
Customer Name : Jakap Metind Pvt.Ltd,
'
Address : Plot No. 3864, Phase, Dared
Customer Reference : 187,13,03.2019
Receipt Date. : 14.03.2019
ww
' Testitem : Taper Plug Gauge :
Indentity Numer
Make : BAKER Serial Number: 2H4902/a
Range : 1/8-27 NPTF 6 STEP
‘As Received Condition : OK Ref. Standard. No. ANsi 81 205
Tethperature : 20° 2°C Relative Humidity: 40-60%
Calibration Method: Gc/wi/os
Master Details & Traceability
@ ‘SN. [ Master Equipments | 1D No. Calibration Report No. Valid up to
| ULM sc/uum/a | CGit/2018/0727/C-001 7/26/2820
Uncertainty of Measurment. : 25 um
‘The Uncertainty Stated is the expanded uncertainty of measurment obtained by multiplying the
Standard uncertainty by the coverage factor K=2 corresponds to confidence level of 95 %
‘This cerficate refers only to the particular item(s) eubmited for calibration.
‘The Calioration results inthis cerficate are ald at the time of & under the stated condition of measurment.
'German
Calibration lab
1st Floor, Office No. 2, Opp. Atika Railway Crossing, Near Rajst
GGondal Road, Rajkot - 360 002. Ph, 0284 - 7373108
Email: germancalibration@gmail.com
Web : www.gelr.co,
CERTIFICATE OF CALIBRATION
Certificate No. Date of Calibration | Due Date * issue Date__| Page
GCiM19/03/002 | __14.03.2019 14.03.2020 14.03.2019 | _2of2
1
CALIBRATION RESULT : (All aro in mm)
Parameter [Specified Value Observed Value
: Basic Pipe Thvead Min Trzaon B 5.489915.5347 5.5290
Basic Pipe Thread Max Truston 8 6.873216.9240 6.9080!
Mirman Teed Min Trvcaton WN 4.8565/4.9073 48890
Minimum Thread. Max Trncaten MNT | 6.2967/6.2459 6.2390
Maximum Teas Nin Tancation MX esiieeneed cn
Maxi Thrend, Max uration MAT cece ee
piraw aoe ce 8.4201/8.42301 8.4220
Feser on Obes 0.0620/0.0630 0.0825
Calibrated
P.R.CHAVDA
Technical Manager
0) ; '
P.RCHAVDA