This document describes a gravity molding machine that can produce small sand molds measuring 450 x 420 x 40 mm at a rate of one mold per minute using a cold-box process. The system has a low investment cost and allows for either wood or resin patterns. It fills molds by gravity, levels and compacts the sand with vibration, hardens it with gas, strips molds with ejector pins, and transports finished molds on a conveyor belt. The system consists of two forming machines and two painting/core assembly belts that merge into a single matching system.
This document describes a gravity molding machine that can produce small sand molds measuring 450 x 420 x 40 mm at a rate of one mold per minute using a cold-box process. The system has a low investment cost and allows for either wood or resin patterns. It fills molds by gravity, levels and compacts the sand with vibration, hardens it with gas, strips molds with ejector pins, and transports finished molds on a conveyor belt. The system consists of two forming machines and two painting/core assembly belts that merge into a single matching system.
This document describes a gravity molding machine that can produce small sand molds measuring 450 x 420 x 40 mm at a rate of one mold per minute using a cold-box process. The system has a low investment cost and allows for either wood or resin patterns. It fills molds by gravity, levels and compacts the sand with vibration, hardens it with gas, strips molds with ejector pins, and transports finished molds on a conveyor belt. The system consists of two forming machines and two painting/core assembly belts that merge into a single matching system.
Gravity molding machine to produce small sand moulds
(450 x 420 x 40 mm)
- Simpleness of the system
- Low investment - Possibility of using either wood or resin patterns - Typically Cold-box process - Filling by gravity - Sand mould leveled and compacted by vibration - Hardening by gassing head - Sand mould stripped by the ejector pins - Collected by a manipulator to place the mould on a conveyor belt - Production cycle of 1 sand mould per minute - The system consists of two forming machines, two painting and core assembling belts, which merge into a single matching system. Fast-Form moulding system
TECHNICAL DATA :
- Type of filling : by gravity
- Process : cold-box - Mould dimensions : 540 x 420 x 150 mm - Mould height : min. 80 mm – max. 250 mm - Cycle time : 1 sand mould/minute Fast-Form moulding system