Professional Documents
Culture Documents
81681E CRTi4 7.0 1PieceDieAsm Drawing
81681E CRTi4 7.0 1PieceDieAsm Drawing
81681E CRTi4 7.0 1PieceDieAsm Drawing
CAGE
CAGE
SIZE (in) CASING WEIGHT (ppf) PART NUMBER 1 PART NAME P/N
82999
7 38.0-42.7 83000 IntSlip(70-427),CRTi4-7 SEE
NOTE 1
CASING SIZE TABLE E
NOTE:
E 1. CAGE 82999 HAS A REDUCED TORQUE LIMITATION, SEE TOOL SPECIFICATIONS FOR INFORMATION AND
REFER TO ASSEMBLY DRAWING 105052 FOR COMPATIBLE PARTS WITH THE CAGE.
NOTE:
2. USE CAGE 83145 FOR THIS SIZE. SEE TOOL SPECIFICATIONS FOR INFORMATION AND
E REFER TO ASSEMBLY DRAWING 105052 FOR COMPATIBLE PARTS WITH THE CAGE.
Initial JT Add SW assembly model to system, update obs parts. Update Decimal: x.xxx
Tol.
0.005
T.I.R.
0.004
Finish
63Ra
1-Piece.Assembly
x.xx 0.010 0.010 125Ra
Date 2019-10-22 change description. Add page 2 for reference dimensions. x.x 0.030 0.020 250Ra Third Angle Projection Modelled: P. Dorobantu Date: 2008-06-05
Notice: This document and the drawings and data it embodies ("Confidential Information") are proprietary to Volant Oil Tools Inc. ("Volant") Fraction: x/x
and are provided to the Recipient in confidence. The Recipient accepts this document in confidence and agrees that it will: (1) restrict the
0.030 0.020 250Ra
Drafted: S. Mortenson Date: 2010-07-29
Angular: x.x 0.5
use of the Confidential Information to the sole purpose ("Purpose") for which it was provided, as set out in a separate document; (2) not
copy, reproduce, or disclose the document or Confidential Information to others in whole or in part; (3) use reasonable care to protect the
x 1.0 Review:
Confidential Information from unauthorized use, dissemination, or publication; (4) return the document and all copies upon completion of Inside corner radii R.03; break all edges .02X45
the Purpose or upon Volant request. Volant reserves all rights in the document and the Confidential Information, including copyright. Thread entry angle 45 ; thread exit angle 27 Sheet: 1 of 2 Scale: NTS Wt (lbf): 1443* Drawing: 81681 Rev. E1
59.0
11.1 31.0
16.3
9.1 28.9
9.5
5.6- 5.8
11.6
13.7
Initial JT Add SW assembly model to system, update obs parts. Update Decimal: x.xxx
Tol.
0.005
T.I.R.
0.004
Finish
63Ra
1-Piece.Assembly
x.xx 0.010 0.010 125Ra
Date 2019-10-22 change description. Add page 2 for reference dimensions. x.x 0.030 0.020 250Ra Third Angle Projection Modelled: P. Dorobantu Date: 2008-06-05
Notice: This document and the drawings and data it embodies ("Confidential Information") are proprietary to Volant Oil Tools Inc. ("Volant") Fraction: x/x
and are provided to the Recipient in confidence. The Recipient accepts this document in confidence and agrees that it will: (1) restrict the
0.030 0.020 250Ra
Drafted: S. Mortenson Date: 2010-07-29
Angular: x.x 0.5
use of the Confidential Information to the sole purpose ("Purpose") for which it was provided, as set out in a separate document; (2) not
copy, reproduce, or disclose the document or Confidential Information to others in whole or in part; (3) use reasonable care to protect the
x 1.0 Review:
Confidential Information from unauthorized use, dissemination, or publication; (4) return the document and all copies upon completion of Inside corner radii R.03; break all edges .02X45
the Purpose or upon Volant request. Volant reserves all rights in the document and the Confidential Information, including copyright. Thread entry angle 45 ; thread exit angle 27 Sheet: 2 of 2 Scale: NTS Wt (lbf): N/A Drawing: 81681 Rev. E1
E