Professional Documents
Culture Documents
Stiyt::::: Cement ',: 5A-160
Stiyt::::: Cement ',: 5A-160
{g,f,mT}
Srp"+n rnrnl:r ffr. Cnur- Ex.um,.eEnrlic
trb&...re: Sirtil$ ffil _%4; F*S.y:55t6ItSS Ed* XI2S, $ril*r.*rel.ec.bd,{# STIYT
BUP;** 'd.F.ese.qiaa\
T*$.iry;& &=ssl;lt$lrr*
Cgruc*err, Lgesn"ermfiY
BRTC No, : 1102-227A620-211CE; Dt.2611112020
Sent by : LafargeHolcim Bangladesh Ltd.
Ref. No. : LHBLl202Aft34; Dt.2611112020
Project : Routine Test
Sample : Cement lBrand .HOLCIM RED; lD: -l Type: CEM 152.5 N
Date of Casting ', 1211212020 Our lD : 5A-160 Test Method & Specification : astm
est Results of Portland Cement
Age 3:dayS'..,
Date .1 5-Dec.20,, tl9-.Dee.20
Compressive
Strength, 3960 psi 5010 nsi 6410 rsi
ln figure
psi& (Mpa)q (27.3 Mpa) (35 Mpa) (44.2 Mpa)
ASTM'109-1:1b
Three thousand nine Five thousand seventy Six thousand four
ln words
hundred sixty psi psi hundred ten psi
Standard/Optional* Requirements for PC 1740 psi 2760 psi 4060 psi
Typel:ASTMC150-19a (12 Mpa) (19 Mpa) (28 Mpa)
4,-6flr
Dr. A, B. M. Badruzzaman
M,v
Snigdha Afsana
GFZMXT6dF
Professor, Dept, of Civil Engg., BUET Assistant Professor, Dept. of Civil Engg., BUET
lmportant Notes: Samples as supplied to us have been tested rn our laboratory, BRTC does not have any responsibility as to the
representative character of the samples required to be tested. lt is recommended that samples are sent in a secured and sealed
coverlpacketlcontainer duly signed by a competent authority, in order to avoid fraudulent fabrication of test results, it is also recommended that
all the test reports are collected by an authorized person, and not by the OontractorlSupplier.