Professional Documents
Culture Documents
DPG Product Presentation - ITA - 02-05-12
DPG Product Presentation - ITA - 02-05-12
Snehal Parulekar
DPG Product Management
Liebert ITA
Available Variants
ITA LB 6kVA
Item Code : 536600630000
ITA LB 10kVA
Item Code : 526600103001
ITA LB 20kVA
Item Code : 526600203000
Mini Online UPS - Liebert ITA
(3Ph / 1Ph Input and 1Ph output :6 / 10kVA & 3Ph Input and 3Ph / 1Ph Output : 20kVA) Cont…
Features
True Online DSP Control with high O/P Vtg Precision
Advanced Software
Mini Online UPS - Liebert ITA
(3Ph / 1Ph Input and 1Ph output :6 / 10kVA & 3Ph Input and 3Ph / 1Ph Output : 20kVA)
Features
Capacities – 6kVA at 0.8 P.F./ 10kVA & 20kVA at 0.9 P.F
Generator compatible
Network Room
Output Nom. Vtg 220V, +/-3% 220V, 1%, 380V, 1% (Balanced Load)
Vtg THD <=3% (linear load) <=2% at linear load,
<=5%(Non-linear load) <=5% for non-linear load
Input 220V,1 ph / 380, 3ph 380/400/415V, 3Ph
Vtg Range 176-276V 161Vac (-30%) to 276Vac(+20%)
Power Factor 1 Ph: >0.99, 3 Ph: >=0.95 0.99 at F.L.
THDi 1Ph : <9%, 3Ph : <5% Linear FL: 5%(Float charging), Half load : 7%
Possible Configuration 3 +1 3 +1 3 +1
Technical Specification - Liebert ITA
(3Ph / 1Ph Input and 1Ph output :6 / 10kVA & 3Ph Input and 3Ph / 1Ph Output : 20kVA)
Rectifier Type
Frequency 50 Hz 50 Hz 40 Hz ~ 70 Hz
Communication
6kVA 10kVA 20kVA
Management
Communication
USB / Intelligent Slot (Dry contact Card/ SIC Card/ Modbus Card / RS 485 Card)
Port
Monitoring
Site Monitor
Software (Optional)
Input System-3 Ph/1Ph / Output 1ph for 6 / 10kVA & Input-3ph for 20kVA/
Output 3ph/1ph
For battery charging - maximized utility enhancing battery life and autonomy
time.
Low Footprint
Available in Tower mount and Rack Mount (2U : 6/10kVA & 3U: 20kVA)
Batteries - 16 nos. 12V for 6 / 10kVA and from 30-40 nos (selectable) for 20kVA,
charging depends on battery capacity
Value for Money
Communication
High Serviceability
Note: * To ‘Broadcast’ alarm messages on LAN, SiteMonitor software need not be installed on all the PCs
(Except to which UPS is directly connected using RS232 cable).
ITA UPS : 2. SNMP Configuration
Requirement:
SIC Card
Sitemonitor software CD
Features:
Remote parameters monitoring:- Input,
output, bypass and battery parameters
can be monitored.
Monitoring of UPS status - On / Off, On
Battery, On bypass. .
Load (64 PC Server) OS shutdown.
Alarm notification via Email. To
maximum 4 mail users.
Event and data logging.
ITA UPS : 3. Relay Contacts Configuration
Requirement:
AS400 Card
Sitemonitor software CD
Features:
Notification* about alarms: Utility failure, UPS
failure, UPS on bypass, Battery low.
Note: * Notification means, for particular alarm respective pins of DB25 connector appear short
externally.
ITA UPS : 4. MODBUS Configuration
Requirement:
Modbus Card
Communication Board
Features:
Parameter Monitoring:- Input, output,
bypass and battery parameters can be
monitored.
UPS status can be monitored by BMS
application.
Accessories ITA
LIEBERT ADAPT SERIES UPS
Part Code Description
536600630000 Liebert ITA, 1 X 1 / 1x3, 6 kVA, LB UPS System
526600103001 Liebert ITA 1x1/3 X 1,10 kVA, UPS LB System
526600203000 Liebert ITA 3 X 3 / 3 X 1, 20 kVA LB UPS System
Long Backup
Monitoring ( SIC, T/H Sensor Card)
EPO Function , ECO Mode