Professional Documents
Culture Documents
Ashishdhama (Quality)
Ashishdhama (Quality)
Ashishdhama (Quality)
Objectives:-
B.E (M.E) I look forward to work in an Organization, which would utilize my
Shri Devi Institute of inherent talent to the maximum and can contribute to the
Engineering & Organizational goals.
Technology,Tumkur,
Karnatka CURRENT ORGANISATION:-
India.
MAINI SCAFFOLD SYSTEM PVT. LTD . As Quality Engineer in
Sidcul Pantnagar U.S. Nagar (Uttarakhand)
I worked with Mangla Tubes Pvt. Ltd. (Unit – II) as (GET) from 20 Oct 2014
to 20 Oct 2015.
I worked with Singla Forging Pvt. Ltd. As Quality Engineer (Process) from
E-Mail: 24 Oct 2015 to 2 Nov 2016.
ashish.dhama03@gmail.co I worked with Lumax DK Auto Industries Ltd. as Quality Engineer (In-
m Process Quality) from 05 Nov 2016 to 18 Aug. 2018.
Currently working with Maini scaffold system Pvt. Ltd. As a Quality
Engg. In Sidcul Pantnagar Rudrapur U.K.
Currently Organization :-
From 18 Oct. 2018 Maini Scaffold Systems Pvt. Ltd. has gained
immense expertise in supplying & trading of Building construction
equipments, wallers, wall panels etc. The supplier company is
located in Rudrapur, Uttarakhand and is one of the leading sellers of
listed products. Buy Building construction equipments, wallers, wall
panels in bulk from us for the best quality products and service
Personal Data
Name: Ashish Dhama
Father’s Name: Ramesh Previous Organization :-
Chand Dhama
Linguistic: Hindi & English From Nov-2016 onwards working as an Quality Engineer in Lumax DK Auto
Date of Birth: 02 May1991 Industries Ltd is a full spectrum “Automotive Components Solutions” Company
Sex: Male Providing Service to Top OEMs in India and manufacturing wide range
Nationality: Indian components . Lumax DK group high Quality automobile lighting solution
Marital Status: Single company Lumax industries Ltd. As the most experienced it is signed in south
Asia are today Lumax Industries Ltd . Commands of midable growth in the
Indian automobile illumination industries.
Previous Organization:-
Job profile:-
Responsible for Process Quality Assurance.
Responsible for Final Quality Assurance.
Responsible for Inward Quality Assurance.
Responsible for PDI and Customer Quality
Responsible for calibration of welding fixture and gauges
Quality Improvement through Component & Layout Inspection.
Conducting vendor audit and process improvement
Maintain monthly rejection data.
Submit rejection summary report to top management.
Responsible for new development sample inspection
Final Inspection Defect Analysis & Monitoring.
Reduce Rejection / Rework cost by kaizen & Countermeasure
Implementation.
Line problem analysis with coordination with other concerned sections.
PPM Trends Monitoring, Improvement in supplier Process by QAV-II.
Imparting training to workman about innovative techniques & new
development. Quality control of manufactured parts.
Good knowledge about final product dispatch report.
Responsible for optimum utilization of manpower & output of line.
Responsible for reducing process trouble losses (Like Set up &
adjustment time, Cycle time & defect rate).
Warranty & claim analysis at customer end, Monitoring quality systems &
compliance with various standards; handling overall process.
Troubleshooting and maintaining requisite documents to ensure complete
in-process quality.
To carry out Process & Product audit at Suppliers end with SQA section &
look for continuous improvement based on audit findings.
Assessing variation in Process & Product characteristics, collecting data,
analyzing data &making decision based on statistical output..
Knowledge of “7-QC TOOLS “[Solving the problem by using 7QC TOOLS
(Analyze the problem & 5 WHY Analysis done of Customer receiving
problem in warranty & line rejection for improving Quality) Make Defect
wise Pareto diagram] .
Qualifications
Professional Qualifications:
B.E (Mechanical Engg.) From Shri Devi Institute of Engineering &
Technology, Tumkur, Karnataka India. in 2014 with 61%.
Academic Qualification
12th: from Kripa ram Janta inter college Meerut with 55% affiliated to
U. P. board.
10th: from Sharv hitkari Inter College with 55% affiliated to U.P. board.
Software Skills
Computer concepts known: Operating System, Basic Knowledge of
Computer.
Technical Skills:
Diploma in Computer Application.
Problem Solving
Documentation Skills
Quality GPM and Industries knowledge
SAP (System Analysis and Program Development)
TPM Activities
5S Audit (Weekly basis)
JH Step Audit (Weekly basis)
TPM Activities
Poka Yoke
Kaizen
KPI
Lean
Summer Training
Topic:- Tiruptai Container Pvt. Ltd.
Sikandrabad UTTAR PRADESH.
Duration:- 20-07-2014 TO 20-09-2014
Project Undertaken:
Inter-Personal skills
Leadership quality
Hardworking
Adaptable
Polite and Positive Attitude
Honest Worker
I hereby declare that all the information’s provided here are correct to
the best of my knowledge.
SIGNATURE
ASHISH DHAMA