Professional Documents
Culture Documents
RF RF: Automatic Straightening Machine From Coil
RF RF: Automatic Straightening Machine From Coil
RF RF: Automatic Straightening Machine From Coil
RF 20-20M
Automatic Straightening Machine from coil
www.mepgroup.com
RF 10-10M • RF 20-20M
SIMPLICITY MADE TO MEASURE
The RF series of straightening machines can straighten and cut
wires up to a length of 12 meters. Their ease of use, sturdiness and
the quality of the finished product makes them a reliable tool.
FLEXIBILITY
The different versions allow to set the production based on specific
needs either for high productivity (RF 10 / RF 20 same length) or
single element (RF 10 / RF 20M different lengths).
Straightening system
FAST CUTTING
The shear is equipped with mechanical STEADY QUALITY
quick release which ensures the rebar
Two infeed units drive properly the wire,
produced to be always within tollerance.
ensuring constant straightening speed
and quality.
The various versions allow to operate with
different speeds depending on the lengths
and the diameters to be produced.
EASE OF USE QUALITY DECOILING
• The operator is able to control all machine operations using the control panel.
The Multiprogram version allows to manage a list of up to 20 positions, with • Triple decoiler complete with 3 coil-holders with a total capacity of 6 t, equipped
different quantities and lengths of rebar. with a braking system. (OPTIONAL)
OUTFEED CHANNEL
from Ø 3 to Ø 10 mm from Ø 4 to Ø 16 mm
Smooth wire or rebar
from # 2 to #3 from #2 to # 5
PROGRAMMABLE CUTTING SEQUENCES fy = 600 N/mm² - ft = 700 N/mm² (other loads on request)
PROGRAMMING
FEED RATE
INSTALLED POWER
• An integrated vacuum system ensures that dust and mill scale are separately
collected.
14 kW 25 kW
maximum (other sizes upon request)
18.7 hp 33.5 hp
MEP Brasil
Rua Bom Jesus da Cachoeira, nº 100
Parque Edu Chaves
CEP 02236-020 - Sao Paulo - BRASIL
Tel. +55 11 2240.4610 - 2240.4553
Fax +55 11 2240.4610 - 2240.4553
www.mepgroup.com
sales@mepgroup.com