ONU AUTO UPGRADE GUIDE VIA INAS

Thanh.Nguyen
DASAN ZHONE SOLUTIONS (DZS)
 ONU auto upgrade guide via INAS

1 ONU Auto Upgrade Guide by INAS Task Manager .................................................................. 2

1.1 Procedure ................................................................................................................................................................................................................ 2
1.2 Procedure in Detail.................................................................................................................................................................................................. 2
2 ONU Auto Upgrade Guide by INAS Telnet Tool....................................................................... 5
2.1 Procedure ................................................................................................................................................................................................................ 5
2.2 Procedure in Detail.................................................................................................................................................................................................. 5

Page 1 of 7
 ONU auto upgrade guide via INAS

To do ONU firmware upgrade, we can perform it through INAS. The NMS system support to do it by two methods:
➢ Method 1: Do ONT upgrade via Task manager which it is performed by SNMP
➢ Method 2: Do ONT upgrade via shell script tool on INAS which it is performed like as put command lines.
Depending on, you can use method 1/2.

1 ONU Auto Upgrade Guide by INAS Task Manager

1.1 Procedure
- Step 1: Select Task Manager for ONT-Upgrade
- Step 2: Configure ONT Upgrade Profile (FTP info; firmware info; upgrade time …)
- Step 3: Select Node IP and then execute ONT Auto Upgrade
1.2 Procedure in Detail
- Step 1: Select Task manager == > Configure model type/ Group/Select Task type = ONTUpgrade == > Click Search

- Step 2: Configure ONT Upgrade profile

Page 2 of 7
 ONU auto upgrade guide via INAS

o Profile for H646GM-V FTP/Fimrware information == > Fill in all information and then click Add
o Profile for H646GM-V Upgrade time == > Fill in all information and then click Add

- Step 3: Select ONT Upgrade profile and Node IP and then execute the ONT upgrade

Page 3 of 7
ONU auto upgrade guide via INAS

Page 4 of 7
 ONU auto upgrade guide via INAS

2 ONU Auto Upgrade Guide by INAS Telnet Tool

2.1 Procedure
- Step 1: Prepare Configuration Template
- Step 2: Open Shell Script Tool on INAS
- Step 3: Configure command line on Shell Script Tool
- Step 4: Execute the Shell Script Tool
2.2 Procedure in Detail

- Step 1: Follow DZS template Guidelines

- Step 2: Click Tool on Task bar == > Select Shell Script Tool

- Step 3: Configure command line for script running

Page 5 of 7
 ONU auto upgrade guide via INAS

Note: If it is the first time of the Mass upgrade, you must enable auto upgrade on all GPON port by below command line. If you already
performed onu auto upgrade to other models on OLT then you don’t needed to configure it.
V8102_PA[B](config)# interface range gpon 1/1-16
V8102_PA[B](config-if-range[GPON1/1-16])# onu auto-upgrade enable
V8102_PA[B](config)# interface range gpon 2/1-16
V8102_PA[B](config-if-range[GPON1/1-16])# onu auto-upgrade enable
V8102_PA[B](config-if-range[GPON1/1-16])#end
V8102_PA[B]# write memory

Page 6 of 7
 ONU auto upgrade guide via INAS

- Execute the Script:

Page 7 of 7